Adaptive Frequency Hopping | System & Performance | Bluetooth LE | v5.0 | Silicon Labs In this case, the scan is done after every second advertisement, i.e., once every 160 ms. ... Bluetooth Low Energy has two channel selection algorithms.

TX Power Limitations for Regulatory Compliance (ETSI, FCC) | System & Performance | Bluetooth LE | v3.1 | Silicon Labs // Bluetooth LE//Version 3.1 //General //System & Performance ... In these cases, PSD (Power Spectral Density) also must be tested, which allows 10 dBm / 1 MHz.

Optimizing Current Consumption in Bluetooth Low Energy Devices | System & Performance | Bluetooth LE | v5.0 | Silicon Labs // Bluetooth LE//Version 5.0 //General //System & Performance ... In this configuration, the application uses default settings for the advertising interval (100 ms), and +8 dBm on a BGM121.

TX Power Limitations for Regulatory Compliance (ETSI, FCC) | Performance | Bluetooth LE | v8.1.0 | Silicon Labs // Bluetooth LE//Version 8.1.0 //Fundamentals ... In these cases, PSD (Power Spectral Density) also must be tested, which allows 10 dBm / 1 MHz.

Bluetooth Advertising Data Basics | Advertising and Scanning | Bluetooth LE | v3.1 | Silicon Labs In the second example, the advertising payload has the maximum length i.e., 31 bytes. ... Bluetooth Core Specification - This is the golden reference, but not that easy to digest.