ZigBee Device Object (ZDO) functions available on all platforms. See ZigBee Device Object (ZDO) Information for documentation.
License#
Copyright 2018 Silicon Laboratories Inc. www.silabs.com
The licensor of this software is Silicon Laboratories Inc. Your use of this software is governed by the terms of Silicon Labs Master Software License Agreement (MSLA) available at www.silabs.com/about-us/legal/master-software-license-agreement. This software is distributed to you in Source Code format and is governed by the sections of the MSLA applicable to Source Code.
/***************************************************************************/
#ifndef SILABS_ZIGBEE_DEVICE_COMMON_H
#define SILABS_ZIGBEE_DEVICE_COMMON_H
#define ZDO_MESSAGE_OVERHEAD 1
#ifdef DOXYGEN_SHOULD_SKIP_THIS
EmberStatus emberNodeDescriptorRequest(EmberNodeId target,
EmberApsOption options);
#else
// Macroized to save code space.
EmberStatus emberSendZigDevRequestTarget(EmberNodeId target,
uint16_t clusterId,
EmberApsOption options);
#define emberNodeDescriptorRequest(target, opts) \
(emberSendZigDevRequestTarget((target), NODE_DESCRIPTOR_REQUEST, (opts)))
#endif
#ifdef DOXYGEN_SHOULD_SKIP_THIS
EmberStatus emberPowerDescriptorRequest(EmberNodeId target,
EmberApsOption options);
#else
// Macroized to save code space.
#define emberPowerDescriptorRequest(target, opts) \
(emberSendZigDevRequestTarget((target), POWER_DESCRIPTOR_REQUEST, (opts)))
#endif
EmberStatus emberSimpleDescriptorRequest(EmberNodeId target,
uint8_t targetEndpoint,
EmberApsOption options);
#ifdef DOXYGEN_SHOULD_SKIP_THIS
EmberStatus emberActiveEndpointsRequest(EmberNodeId target,
EmberApsOption options);
#else
// Macroized to save code space.
#define emberActiveEndpointsRequest(target, opts) \
(emberSendZigDevRequestTarget((target), ACTIVE_ENDPOINTS_REQUEST, (opts)))
#endif
#ifdef DOXYGEN_SHOULD_SKIP_THIS
EmberStatus emberBindRequest(EmberNodeId target,
EmberEUI64 source,
uint8_t sourceEndpoint,
uint16_t clusterId,
uint8_t type,
EmberEUI64 destination,
EmberMulticastId groupAddress,
uint8_t destinationEndpoint,
EmberApsOption options);
#else
// Macroized to save code space.
#define emberBindRequest(target, \
src, \
srcEndpt, \
cluster, \
type, \
dest, \
groupAddress, \
destEndpt, \
opts) \
\
(emberSendZigDevBindRequest((target), \
BIND_REQUEST, \
(src), (srcEndpt), (cluster), \
(type), (dest), (groupAddress), \
(destEndpt), (opts)))
EmberStatus emberSendZigDevBindRequest(EmberNodeId target,
uint16_t bindClusterId,
EmberEUI64 source,
uint8_t sourceEndpoint,
uint16_t clusterId,
uint8_t type,
EmberEUI64 destination,
EmberMulticastId groupAddress,
uint8_t destinationEndpoint,
EmberApsOption options);
#endif
#ifdef DOXYGEN_SHOULD_SKIP_THIS
EmberStatus emberUnbindRequest(EmberNodeId target,
EmberEUI64 source,
uint8_t sourceEndpoint,
uint16_t clusterId,
uint8_t type,
EmberEUI64 destination,
EmberMulticastId groupAddress,
uint8_t destinationEndpoint,
EmberApsOption options);
#else
// Macroized to save code space.
#define emberUnbindRequest(target, \
src, \
srcEndpt, \
cluster, \
type, \
dest, \
groupAddress, \
destEndpt, \
opts) \
\
(emberSendZigDevBindRequest((target), \
UNBIND_REQUEST, \
(src), (srcEndpt), (cluster), \
(type), (dest), (groupAddress), \
(destEndpt), (opts)))
#endif
#ifdef DOXYGEN_SHOULD_SKIP_THIS
EmberStatus emberLqiTableRequest(EmberNodeId target,
uint8_t startIndex,
EmberApsOption options);
#else
#define emberLqiTableRequest(target, startIndex, options) \
(emberTableRequest(LQI_TABLE_REQUEST, (target), (startIndex), (options)))
EmberStatus emberTableRequest(uint16_t clusterId,
EmberNodeId target,
uint8_t startIndex,
EmberApsOption options);
#endif
#ifdef DOXYGEN_SHOULD_SKIP_THIS
EmberStatus emberRoutingTableRequest(EmberNodeId target,
uint8_t startIndex,
EmberApsOption options);
#else
#define emberRoutingTableRequest(target, startIndex, options) \
(emberTableRequest(ROUTING_TABLE_REQUEST, (target), (startIndex), (options)))
#endif
#ifdef DOXYGEN_SHOULD_SKIP_THIS
EmberStatus emberBindingTableRequest(EmberNodeId target,
uint8_t startIndex,
EmberApsOption options);
#else
#define emberBindingTableRequest(target, startIndex, options) \
(emberTableRequest(BINDING_TABLE_REQUEST, (target), (startIndex), (options)))
#endif
EmberStatus emberLeaveRequest(EmberNodeId target,
EmberEUI64 deviceAddress,
uint8_t leaveRequestFlags,
EmberApsOption options);
EmberStatus emberPermitJoiningRequest(EmberNodeId target,
uint8_t duration,
uint8_t authentication,
EmberApsOption options);
#ifdef DOXYGEN_SHOULD_SKIP_THIS
void emberSetZigDevRequestRadius(uint8_t radius);
uint8_t emberGetZigDevRequestRadius(void);
uint8_t emberGetLastZigDevRequestSequence(void);
#else
extern uint8_t zigDevRequestRadius;
#define emberGetZigDevRequestRadius() (zigDevRequestRadius)
#define emberSetZigDevRequestRadius(x) (zigDevRequestRadius = x)
#define emberGetLastZigDevRequestSequence() \
(emberGetLastAppZigDevRequestSequence())
#endif
uint8_t emberGetLastAppZigDevRequestSequence(void);
#ifndef DOXYGEN_SHOULD_SKIP_THIS
//------------------------------------------------------------------------------
// Utility functions used by the library code.
EmberStatus emberSendZigDevRequest(EmberNodeId destination,
uint16_t clusterId,
EmberApsOption options,
uint8_t *contents,
uint8_t length);
uint8_t emberNextZigDevRequestSequence(void);
#endif // DOXYGEN_SHOULD_SKIP_THIS
#endif // SILABS_ZIGBEE_DEVICE_COMMON_H
Service Discovery Functions#
Request the specified node to send its node descriptor. The node descriptor contains information about the capabilities of the ZigBee node. It describes logical type, APS flags, frequency band, MAC capabilities flags, manufacturer code and maximum buffer size. It is defined in the ZigBee Application Framework Specification.
Request the specified node to send its power descriptor. The power descriptor gives a dynamic indication of the power status of the node. It describes current power mode, available power sources, current power source and current power source level. It is defined in the ZigBee Application Framework Specification.
Request the specified node to send the simple descriptor for the specified endpoint. The simple descriptor contains information specific to a single endpoint. It describes the application profile identifier, application device identifier, application device version, application flags, application input clusters and application output clusters. It is defined in the ZigBee Application Framework Specification.
Request the specified node to send a list of its active endpoints. An active endpoint is one for which a simple descriptor is available.
Binding Manager Functions#
Send a request to create a binding entry with the specified contents on the specified node.
Send a request to remove a binding entry with the specified contents from the specified node.
Node Manager Functions#
Request the specified node to send its LQI (neighbor) table. The response gives PAN ID, EUI64, node ID and cost for each neighbor. The EUI64 is only available if security is enabled. The other fields in the response are set to zero. The response format is defined in the ZigBee Device Profile Specification.
Request the specified node to send its routing table. The response gives destination node ID, status and many-to-one flags, and the next hop node ID. The response format is defined in the ZigBee Device Profile Specification.
Request the specified node to send its nonvolatile bindings. The response gives source address, source endpoint, cluster ID, destination address and destination endpoint for each binding entry. The response format is defined in the ZigBee Device Profile Specification. Note that bindings that have the Ember-specific UNICAST_MANY_TO_ONE_BINDING type are reported as having the standard UNICAST_BINDING type.
Request the specified node to remove the specified device from the network. The device to be removed must be the node to which the request is sent or one of its children.
Request the specified node to allow or disallow association.
Change the default radius for broadcast ZDO requests.
Retrieve the default radius for broadcast ZDO requests.
Provide access to the application ZDO transaction sequence number for last request. This function has been deprecated and replaced by emberGetLastAppZigDevRequestSequence().
Provide access to the application ZDO transaction sequence number for last request.
Macros#
ZDO messages start with a sequence number.
Service Discovery Functions Documentation#
emberNodeDescriptorRequest#
EmberStatus emberNodeDescriptorRequest (EmberNodeId target, EmberApsOption options)
Request the specified node to send its node descriptor. The node descriptor contains information about the capabilities of the ZigBee node. It describes logical type, APS flags, frequency band, MAC capabilities flags, manufacturer code and maximum buffer size. It is defined in the ZigBee Application Framework Specification.
N/A | target | The node whose node descriptor is desired. |
N/A | options | The options to use when sending the request. See emberSendUnicast() for a description. |
Returns
An EmberStatus value. EMBER_SUCCESS, EMBER_NO_BUFFERS, EMBER_NETWORK_DOWN or EMBER_NETWORK_BUSY.
50
of file /Users/vihuszar/Git/EmbeddedSoftware/super/protocol/zigbee/app/util/zigbee-framework/zigbee-device-common.h
emberPowerDescriptorRequest#
EmberStatus emberPowerDescriptorRequest (EmberNodeId target, EmberApsOption options)
Request the specified node to send its power descriptor. The power descriptor gives a dynamic indication of the power status of the node. It describes current power mode, available power sources, current power source and current power source level. It is defined in the ZigBee Application Framework Specification.
N/A | target | The node whose power descriptor is desired. |
N/A | options | The options to use when sending the request. See emberSendUnicast() for a description. |
Returns
An EmberStatus value. EMBER_SUCCESS, EMBER_NO_BUFFERS, EMBER_NETWORK_DOWN or EMBER_NETWORK_BUSY.
77
of file /Users/vihuszar/Git/EmbeddedSoftware/super/protocol/zigbee/app/util/zigbee-framework/zigbee-device-common.h
emberSimpleDescriptorRequest#
EmberStatus emberSimpleDescriptorRequest (EmberNodeId target, uint8_t targetEndpoint, EmberApsOption options)
Request the specified node to send the simple descriptor for the specified endpoint. The simple descriptor contains information specific to a single endpoint. It describes the application profile identifier, application device identifier, application device version, application flags, application input clusters and application output clusters. It is defined in the ZigBee Application Framework Specification.
N/A | target | The node of interest. |
N/A | targetEndpoint | The endpoint on the target node whose simple descriptor is desired. |
N/A | options | The options to use when sending the request. See emberSendUnicast() for a description. |
Returns
An EmberStatus value. EMBER_SUCCESS, EMBER_NO_BUFFERS, EMBER_NETWORK_DOWN or EMBER_NETWORK_BUSY.
103
of file /Users/vihuszar/Git/EmbeddedSoftware/super/protocol/zigbee/app/util/zigbee-framework/zigbee-device-common.h
emberActiveEndpointsRequest#
EmberStatus emberActiveEndpointsRequest (EmberNodeId target, EmberApsOption options)
Request the specified node to send a list of its active endpoints. An active endpoint is one for which a simple descriptor is available.
N/A | target | The node whose active endpoints are desired. |
N/A | options | The options to use when sending the request. See emberSendUnicast() for a description. |
Returns
An EmberStatus value. EMBER_SUCCESS, EMBER_NO_BUFFERS, EMBER_NETWORK_DOWN or EMBER_NETWORK_BUSY.
120
of file /Users/vihuszar/Git/EmbeddedSoftware/super/protocol/zigbee/app/util/zigbee-framework/zigbee-device-common.h
Binding Manager Functions Documentation#
emberBindRequest#
EmberStatus emberBindRequest (EmberNodeId target, EmberEUI64 source, uint8_t sourceEndpoint, uint16_t clusterId, uint8_t type, EmberEUI64 destination, EmberMulticastId groupAddress, uint8_t destinationEndpoint, EmberApsOption options)
Send a request to create a binding entry with the specified contents on the specified node.
N/A | target | The node on which the binding will be created. |
N/A | source | The source EUI64 in the binding entry. |
N/A | sourceEndpoint | The source endpoint in the binding entry. |
N/A | clusterId | The cluster ID in the binding entry. |
N/A | type | The type of binding, either UNICAST_BINDING, MULTICAST_BINDING, or UNICAST_MANY_TO_ONE_BINDING. UNICAST_MANY_TO_ONE_BINDING is an Ember-specific extension and should be used only when the target is an Ember device. |
N/A | destination | The destination EUI64 in the binding entry for UNICAST_BINDING or UNICAST_MANY_TO_ONE_BINDING. |
N/A | groupAddress | The group address for the MULTICAST_BINDING. |
N/A | destinationEndpoint | The destination endpoint in the binding entry for the UNICAST_BINDING or UNICAST_MANY_TO_ONE_BINDING. |
N/A | options | The options to use when sending the request. See emberSendUnicast() for a description. |
Returns
An EmberStatus value. EMBER_SUCCESS, EMBER_NO_BUFFERS, EMBER_NETWORK_DOWN or EMBER_NETWORK_BUSY.
158
of file /Users/vihuszar/Git/EmbeddedSoftware/super/protocol/zigbee/app/util/zigbee-framework/zigbee-device-common.h
emberUnbindRequest#
EmberStatus emberUnbindRequest (EmberNodeId target, EmberEUI64 source, uint8_t sourceEndpoint, uint16_t clusterId, uint8_t type, EmberEUI64 destination, EmberMulticastId groupAddress, uint8_t destinationEndpoint, EmberApsOption options)
Send a request to remove a binding entry with the specified contents from the specified node.
N/A | target | The node on which the binding will be removed. |
N/A | source | The source EUI64 in the binding entry. |
N/A | sourceEndpoint | The source endpoint in the binding entry. |
N/A | clusterId | The cluster ID in the binding entry. |
N/A | type | The type of binding, either UNICAST_BINDING, MULTICAST_BINDING, or UNICAST_MANY_TO_ONE_BINDING. UNICAST_MANY_TO_ONE_BINDING is an Ember-specific extension and should be used only when the target is an Ember device. |
N/A | destination | The destination EUI64 in the binding entry for the UNICAST_BINDING or UNICAST_MANY_TO_ONE_BINDING. |
N/A | groupAddress | The group address for the MULTICAST_BINDING. |
N/A | destinationEndpoint | The destination endpoint in the binding entry for the UNICAST_BINDING or UNICAST_MANY_TO_ONE_BINDING. |
N/A | options | The options to use when sending the request. See emberSendUnicast() for a description. |
Returns
224
of file /Users/vihuszar/Git/EmbeddedSoftware/super/protocol/zigbee/app/util/zigbee-framework/zigbee-device-common.h
Node Manager Functions Documentation#
emberLqiTableRequest#
EmberStatus emberLqiTableRequest (EmberNodeId target, uint8_t startIndex, EmberApsOption options)
Request the specified node to send its LQI (neighbor) table. The response gives PAN ID, EUI64, node ID and cost for each neighbor. The EUI64 is only available if security is enabled. The other fields in the response are set to zero. The response format is defined in the ZigBee Device Profile Specification.
N/A | target | The node whose LQI table is desired. |
N/A | startIndex | The index of the first neighbor to include in the response. |
N/A | options | The options to use when sending the request. See emberSendUnicast() for a description. |
Returns
An EmberStatus value. EMBER_SUCCESS, EMBER_NO_BUFFERS, EMBER_NETWORK_DOWN or EMBER_NETWORK_BUSY.
275
of file /Users/vihuszar/Git/EmbeddedSoftware/super/protocol/zigbee/app/util/zigbee-framework/zigbee-device-common.h
emberRoutingTableRequest#
EmberStatus emberRoutingTableRequest (EmberNodeId target, uint8_t startIndex, EmberApsOption options)
Request the specified node to send its routing table. The response gives destination node ID, status and many-to-one flags, and the next hop node ID. The response format is defined in the ZigBee Device Profile Specification.
N/A | target | The node whose routing table is desired. |
N/A | startIndex | The index of the first route entry to include in the response. |
N/A | options | The options to use when sending the request. See emberSendUnicast() for a description. |
Returns
An EmberStatus value. EMBER_SUCCESS, EMBER_NO_BUFFERS, EMBER_NETWORK_DOWN or EMBER_NETWORK_BUSY.
305
of file /Users/vihuszar/Git/EmbeddedSoftware/super/protocol/zigbee/app/util/zigbee-framework/zigbee-device-common.h
emberBindingTableRequest#
EmberStatus emberBindingTableRequest (EmberNodeId target, uint8_t startIndex, EmberApsOption options)
Request the specified node to send its nonvolatile bindings. The response gives source address, source endpoint, cluster ID, destination address and destination endpoint for each binding entry. The response format is defined in the ZigBee Device Profile Specification. Note that bindings that have the Ember-specific UNICAST_MANY_TO_ONE_BINDING type are reported as having the standard UNICAST_BINDING type.
N/A | target | The node whose binding table is desired. |
N/A | startIndex | The index of the first binding entry to include in the response. |
N/A | options | The options to use when sending the request. See emberSendUnicast() for a description. |
Returns
An EmberStatus value. EMBER_SUCCESS, EMBER_NO_BUFFERS, EMBER_NETWORK_DOWN or EMBER_NETWORK_BUSY.
331
of file /Users/vihuszar/Git/EmbeddedSoftware/super/protocol/zigbee/app/util/zigbee-framework/zigbee-device-common.h
emberLeaveRequest#
EmberStatus emberLeaveRequest (EmberNodeId target, EmberEUI64 deviceAddress, uint8_t leaveRequestFlags, EmberApsOption options)
Request the specified node to remove the specified device from the network. The device to be removed must be the node to which the request is sent or one of its children.
N/A | target | The node which will remove the device. |
N/A | deviceAddress | All zeros if the target is to remove itself from the network or the EUI64 of a child of the target device to remove that child. |
N/A | leaveRequestFlags | A bitmask of leave options. Include LEAVE_REQUEST_REMOVE_CHILDREN_FLAG if the target is to remove their children and/or LEAVE_REQUEST_REJOIN_FLAG if the target is to rejoin the network immediately after leaving. |
N/A | options | The options to use when sending the request. See emberSendUnicast() for a description. |
Returns
An EmberStatus value. EMBER_SUCCESS, EMBER_NO_BUFFERS, EMBER_NETWORK_DOWN or EMBER_NETWORK_BUSY.
358
of file /Users/vihuszar/Git/EmbeddedSoftware/super/protocol/zigbee/app/util/zigbee-framework/zigbee-device-common.h
emberPermitJoiningRequest#
EmberStatus emberPermitJoiningRequest (EmberNodeId target, uint8_t duration, uint8_t authentication, EmberApsOption options)
Request the specified node to allow or disallow association.
N/A | target | The node which will allow or disallow association. The request can be broadcast by using a broadcast address (0xFFFC/0xFFFD/0xFFFF). No response is sent if the request is broadcast. |
N/A | duration | A value of 0x00 disables joining. A value of 0xFF enables joining. Any other value enables joining for that number of seconds. |
N/A | authentication | Controls Trust Center authentication behavior. |
N/A | options | The options to use when sending the request. See emberSendUnicast() for a description. This parameter is ignored if the target is a broadcast address. |
Returns
An EmberStatus value. EMBER_SUCCESS, EMBER_NO_BUFFERS, EMBER_NETWORK_DOWN or EMBER_NETWORK_BUSY.
379
of file /Users/vihuszar/Git/EmbeddedSoftware/super/protocol/zigbee/app/util/zigbee-framework/zigbee-device-common.h
emberSetZigDevRequestRadius#
void emberSetZigDevRequestRadius (uint8_t radius)
Change the default radius for broadcast ZDO requests.
N/A | radius | The radius to be used for future ZDO request broadcasts. |
390
of file /Users/vihuszar/Git/EmbeddedSoftware/super/protocol/zigbee/app/util/zigbee-framework/zigbee-device-common.h
emberGetZigDevRequestRadius#
uint8_t emberGetZigDevRequestRadius (void )
Retrieve the default radius for broadcast ZDO requests.
N/A |
Returns
The radius to be used for future ZDO request broadcasts.
397
of file /Users/vihuszar/Git/EmbeddedSoftware/super/protocol/zigbee/app/util/zigbee-framework/zigbee-device-common.h
emberGetLastZigDevRequestSequence#
uint8_t emberGetLastZigDevRequestSequence (void )
Provide access to the application ZDO transaction sequence number for last request. This function has been deprecated and replaced by emberGetLastAppZigDevRequestSequence().
N/A |
Returns
Last application ZDO transaction sequence number used
405
of file /Users/vihuszar/Git/EmbeddedSoftware/super/protocol/zigbee/app/util/zigbee-framework/zigbee-device-common.h
emberGetLastAppZigDevRequestSequence#
uint8_t emberGetLastAppZigDevRequestSequence (void )
Provide access to the application ZDO transaction sequence number for last request.
N/A |
Returns
Last application ZDO transaction sequence number used
420
of file /Users/vihuszar/Git/EmbeddedSoftware/super/protocol/zigbee/app/util/zigbee-framework/zigbee-device-common.h