zigbee-device-common_8h | Ember ZNet API Reference Guide | | v8.0.1

ZigBee Device Object (ZDO) functions available on all platforms. See ZigBee Device Object (ZDO) Information for documentation.

License#

The licensor of this software is Silicon Laboratories Inc. Your use of this software is governed by the terms of Silicon Labs Master Software License Agreement (MSLA) available at www.silabs.com/about-us/legal/master-software-license-agreement. This software is distributed to you in Source Code format and is governed by the sections of the MSLA applicable to Source Code.

/***************************************************************************/
#ifndef SILABS_ZIGBEE_DEVICE_COMMON_H
#define SILABS_ZIGBEE_DEVICE_COMMON_H
#include "stack/include/zigbee-device-stack.h"
#define ZDO_MESSAGE_OVERHEAD 1

#ifdef DOXYGEN_SHOULD_SKIP_THIS
sl_status_t sl_zigbee_node_descriptor_request(sl_802154_short_addr_t target,
                                              sl_zigbee_aps_option_t options);
#else
// Macroized to save code space.
sl_status_t sl_zigbee_send_zig_dev_request_target(sl_802154_short_addr_t target,
                                                  uint16_t clusterId,
                                                  sl_zigbee_aps_option_t options);
#define sl_zigbee_node_descriptor_request(target, opts) \
  (sl_zigbee_send_zig_dev_request_target((target), NODE_DESCRIPTOR_REQUEST, (opts)))
#endif

#ifdef DOXYGEN_SHOULD_SKIP_THIS
sl_status_t sl_zigbee_power_descriptor_request(sl_802154_short_addr_t target,
                                               sl_zigbee_aps_option_t options);
#else
// Macroized to save code space.
#define sl_zigbee_power_descriptor_request(target, opts) \
  (sl_zigbee_send_zig_dev_request_target((target), POWER_DESCRIPTOR_REQUEST, (opts)))
#endif

sl_status_t sl_zigbee_simple_descriptor_request(sl_802154_short_addr_t target,
                                                uint8_t targetEndpoint,
                                                sl_zigbee_aps_option_t options);

#ifdef DOXYGEN_SHOULD_SKIP_THIS
sl_status_t sl_zigbee_active_endpoints_request(sl_802154_short_addr_t target,
                                               sl_zigbee_aps_option_t options);
#else
// Macroized to save code space.
#define sl_zigbee_active_endpoints_request(target, opts) \
  (sl_zigbee_send_zig_dev_request_target((target), ACTIVE_ENDPOINTS_REQUEST, (opts)))
#endif

#ifdef DOXYGEN_SHOULD_SKIP_THIS
sl_status_t sl_zigbee_bind_request(sl_802154_short_addr_t target,
                                   sl_802154_long_addr_t source,
                                   uint8_t sourceEndpoint,
                                   uint16_t clusterId,
                                   uint8_t type,
                                   sl_802154_long_addr_t destination,
                                   sl_zigbee_multicast_id_t groupAddress,
                                   uint8_t destinationEndpoint,
                                   sl_zigbee_aps_option_t options);
#else
// Macroized to save code space.
#define sl_zigbee_bind_request(target,                                 \
                               src,                                    \
                               srcEndpt,                               \
                               cluster,                                \
                               type,                                   \
                               dest,                                   \
                               groupAddress,                           \
                               destEndpt,                              \
                               opts)                                   \
                                                                       \
  (sl_zigbee_send_zig_dev_bind_request((target),                       \
                                       BIND_REQUEST,                   \
                                       (src), (srcEndpt), (cluster),   \
                                       (type), (dest), (groupAddress), \
                                       (destEndpt), (opts)))

sl_status_t sl_zigbee_send_zig_dev_bind_request(sl_802154_short_addr_t target,
                                                uint16_t bindClusterId,
                                                sl_802154_long_addr_t source,
                                                uint8_t sourceEndpoint,
                                                uint16_t clusterId,
                                                uint8_t type,
                                                sl_802154_long_addr_t destination,
                                                sl_zigbee_multicast_id_t groupAddress,
                                                uint8_t destinationEndpoint,
                                                sl_zigbee_aps_option_t options);
#endif

#ifdef DOXYGEN_SHOULD_SKIP_THIS
sl_status_t sl_zigbee_unbind_request(sl_802154_short_addr_t target,
                                     sl_802154_long_addr_t source,
                                     uint8_t sourceEndpoint,
                                     uint16_t clusterId,
                                     uint8_t type,
                                     sl_802154_long_addr_t destination,
                                     sl_zigbee_multicast_id_t groupAddress,
                                     uint8_t destinationEndpoint,
                                     sl_zigbee_aps_option_t options);
#else
// Macroized to save code space.
#define sl_zigbee_unbind_request(target,                               \
                                 src,                                  \
                                 srcEndpt,                             \
                                 cluster,                              \
                                 type,                                 \
                                 dest,                                 \
                                 groupAddress,                         \
                                 destEndpt,                            \
                                 opts)                                 \
                                                                       \
  (sl_zigbee_send_zig_dev_bind_request((target),                       \
                                       UNBIND_REQUEST,                 \
                                       (src), (srcEndpt), (cluster),   \
                                       (type), (dest), (groupAddress), \
                                       (destEndpt), (opts)))
#endif

#ifdef DOXYGEN_SHOULD_SKIP_THIS
sl_status_t sl_zigbee_lqi_table_request(sl_802154_short_addr_t target,
                                        uint8_t startIndex,
                                        sl_zigbee_aps_option_t options);
#else
#define sl_zigbee_lqi_table_request(target, startIndex, options) \
  (sl_zigbee_table_request(LQI_TABLE_REQUEST, (target), (startIndex), (options)))

sl_status_t sl_zigbee_table_request(uint16_t clusterId,
                                    sl_802154_short_addr_t target,
                                    uint8_t startIndex,
                                    sl_zigbee_aps_option_t options);
#endif

#ifdef DOXYGEN_SHOULD_SKIP_THIS
sl_status_t sl_zigbee_routing_table_request(sl_802154_short_addr_t target,
                                            uint8_t startIndex,
                                            sl_zigbee_aps_option_t options);
#else
#define sl_zigbee_routing_table_request(target, startIndex, options) \
  (sl_zigbee_table_request(ROUTING_TABLE_REQUEST, (target), (startIndex), (options)))
#endif

#ifdef DOXYGEN_SHOULD_SKIP_THIS
sl_status_t sl_zigbee_binding_table_request(sl_802154_short_addr_t target,
                                            uint8_t startIndex,
                                            sl_zigbee_aps_option_t options);
#else
#define sl_zigbee_binding_table_request(target, startIndex, options) \
  (sl_zigbee_table_request(BINDING_TABLE_REQUEST, (target), (startIndex), (options)))
#endif
sl_status_t sl_zigbee_leave_request(sl_802154_short_addr_t target,
                                    sl_802154_long_addr_t deviceAddress,
                                    uint8_t leaveRequestFlags,
                                    sl_zigbee_aps_option_t options);

sl_status_t sl_zigbee_permit_joining_request(sl_802154_short_addr_t target,
                                             uint8_t duration,
                                             uint8_t authentication,
                                             sl_zigbee_aps_option_t options);

sl_802154_short_addr_t sl_zigbee_decode_address_response(uint8_t responseLength,
                                                         uint8_t *response,
                                                         sl_802154_long_addr_t eui64Return);

#ifdef DOXYGEN_SHOULD_SKIP_THIS
void sl_zigbee_set_zig_dev_request_radius(uint8_t radius);

uint8_t sl_zigbee_get_zig_dev_request_radius(void);
uint8_t sl_zigbee_get_last_zig_dev_request_sequence(void);
#else
extern uint8_t zigDevRequestRadius;
#define sl_zigbee_get_zig_dev_request_radius() (zigDevRequestRadius)
#define sl_zigbee_set_zig_dev_request_radius(x)        (zigDevRequestRadius = x)
#define sl_zigbee_get_last_zig_dev_request_sequence() \
  (sl_zigbee_get_last_app_zig_dev_request_sequence())
#endif

uint8_t sl_zigbee_get_last_app_zig_dev_request_sequence(void);

#ifndef DOXYGEN_SHOULD_SKIP_THIS
//------------------------------------------------------------------------------
// Utility functions used by the library code.

sl_status_t sl_zigbee_send_zig_dev_request(sl_802154_short_addr_t destination,
                                           uint16_t clusterId,
                                           sl_zigbee_aps_option_t options,
                                           uint8_t *contents,
                                           uint8_t length);

uint8_t sl_zigbee_next_zig_dev_request_sequence(void);

#endif // DOXYGEN_SHOULD_SKIP_THIS

#endif // SILABS_ZIGBEE_DEVICE_COMMON_H

Service Discovery Functions#

sl_status_t

sl_zigbee_node_descriptor_request(sl_802154_short_addr_t target, sl_zigbee_aps_option_t options)

Request the specified node to send its node descriptor. The node descriptor contains information about the capabilities of the ZigBee node. It describes logical type, APS flags, frequency band, MAC capabilities flags, manufacturer code and maximum buffer size. It is defined in the ZigBee Application Framework Specification.

sl_status_t

sl_zigbee_power_descriptor_request(sl_802154_short_addr_t target, sl_zigbee_aps_option_t options)

Request the specified node to send its power descriptor. The power descriptor gives a dynamic indication of the power status of the node. It describes current power mode, available power sources, current power source and current power source level. It is defined in the ZigBee Application Framework Specification.

sl_status_t

sl_zigbee_simple_descriptor_request(sl_802154_short_addr_t target, uint8_t targetEndpoint, sl_zigbee_aps_option_t options)

Request the specified node to send the simple descriptor for the specified endpoint. The simple descriptor contains information specific to a single endpoint. It describes the application profile identifier, application device identifier, application device version, application flags, application input clusters and application output clusters. It is defined in the ZigBee Application Framework Specification.

sl_status_t

sl_zigbee_active_endpoints_request(sl_802154_short_addr_t target, sl_zigbee_aps_option_t options)

Request the specified node to send a list of its active endpoints. An active endpoint is one for which a simple descriptor is available.

Binding Manager Functions#

sl_status_t

sl_zigbee_bind_request(sl_802154_short_addr_t target, sl_802154_long_addr_t source, uint8_t sourceEndpoint, uint16_t clusterId, uint8_t type, sl_802154_long_addr_t destination, sl_zigbee_multicast_id_t groupAddress, uint8_t destinationEndpoint, sl_zigbee_aps_option_t options)

Send a request to create a binding entry with the specified contents on the specified node.

sl_status_t

sl_zigbee_unbind_request(sl_802154_short_addr_t target, sl_802154_long_addr_t source, uint8_t sourceEndpoint, uint16_t clusterId, uint8_t type, sl_802154_long_addr_t destination, sl_zigbee_multicast_id_t groupAddress, uint8_t destinationEndpoint, sl_zigbee_aps_option_t options)

Send a request to remove a binding entry with the specified contents from the specified node.

Node Manager Functions#

sl_status_t

sl_zigbee_lqi_table_request(sl_802154_short_addr_t target, uint8_t startIndex, sl_zigbee_aps_option_t options)

Request the specified node to send its LQI (neighbor) table. The response gives PAN ID, EUI64, node ID and cost for each neighbor. The EUI64 is only available if security is enabled. The other fields in the response are set to zero. The response format is defined in the ZigBee Device Profile Specification.

sl_status_t

sl_zigbee_routing_table_request(sl_802154_short_addr_t target, uint8_t startIndex, sl_zigbee_aps_option_t options)

Request the specified node to send its routing table. The response gives destination node ID, status and many-to-one flags, and the next hop node ID. The response format is defined in the ZigBee Device Profile Specification.

sl_status_t

sl_zigbee_binding_table_request(sl_802154_short_addr_t target, uint8_t startIndex, sl_zigbee_aps_option_t options)

Request the specified node to send its nonvolatile bindings. The response gives source address, source endpoint, cluster ID, destination address and destination endpoint for each binding entry. The response format is defined in the ZigBee Device Profile Specification. Note that bindings that have the Ember-specific UNICAST_MANY_TO_ONE_BINDING type are reported as having the standard UNICAST_BINDING type.

sl_status_t

sl_zigbee_leave_request(sl_802154_short_addr_t target, sl_802154_long_addr_t deviceAddress, uint8_t leaveRequestFlags, sl_zigbee_aps_option_t options)

Request the specified node to remove the specified device from the network. The device to be removed must be the node to which the request is sent or one of its children.

sl_status_t

sl_zigbee_permit_joining_request(sl_802154_short_addr_t target, uint8_t duration, uint8_t authentication, sl_zigbee_aps_option_t options)

Request the specified node to allow or disallow association.

Decode Address Response Messages#

sl_802154_short_addr_t

sl_zigbee_decode_address_response(uint8_t responseLength, uint8_t *response, sl_802154_long_addr_t eui64Return)

Macros#

#define

ZDO_MESSAGE_OVERHEAD 1

ZDO messages start with a sequence number.

Functions#

void

sl_zigbee_set_zig_dev_request_radius(uint8_t radius)

Change the default radius for broadcast ZDO requests.

uint8_t

sl_zigbee_get_zig_dev_request_radius(void)

Retrieve the default radius for broadcast ZDO requests.

uint8_t

sl_zigbee_get_last_zig_dev_request_sequence(void)

Provide access to the application ZDO transaction sequence number for last request. This function has been deprecated and replaced by sl_zigbee_get_last_app_zig_dev_request_sequence().

uint8_t

sl_zigbee_get_last_app_zig_dev_request_sequence(void)

Provide access to the application ZDO transaction sequence number for last request.

Service Discovery Functions Documentation#

sl_zigbee_node_descriptor_request#

sl_status_t sl_zigbee_node_descriptor_request (sl_802154_short_addr_t target, sl_zigbee_aps_option_t options)

Parameters

N/A	target	The node whose node descriptor is desired.
N/A	options	The options to use when sending the request. See sl_zigbee_send_unicast() for a description.

Returns

An ::sl_status_t value. ::SL_STATUS_OK, ::SL_STATUS_ALLOCATION_FAILED, ::SL_STATUS_NETWORK_DOWN or ::SL_STATUS_BUSY.

Definition at line 50 of file app/util/zigbee-framework/zigbee-device-common.h

sl_zigbee_power_descriptor_request#

sl_status_t sl_zigbee_power_descriptor_request (sl_802154_short_addr_t target, sl_zigbee_aps_option_t options)

Parameters

N/A	target	The node whose power descriptor is desired.
N/A	options	The options to use when sending the request. See sl_zigbee_send_unicast() for a description.

Returns

An sl_status_t value. ::SL_STATUS_OK, ::SL_STATUS_ALLOCATION_FAILED, ::SL_STATUS_NETWORK_DOWN or ::SL_STATUS_BUSY.

Definition at line 77 of file app/util/zigbee-framework/zigbee-device-common.h

sl_zigbee_simple_descriptor_request#

sl_status_t sl_zigbee_simple_descriptor_request (sl_802154_short_addr_t target, uint8_t targetEndpoint, sl_zigbee_aps_option_t options)

Parameters

N/A	target	The node of interest.
N/A	targetEndpoint	The endpoint on the target node whose simple descriptor is desired.
N/A	options	The options to use when sending the request. See sl_zigbee_send_unicast() for a description.

Returns

An sl_status_t value. ::SL_STATUS_OK, ::SL_STATUS_ALLOCATION_FAILED, ::SL_STATUS_NETWORK_DOWN or ::SL_STATUS_BUSY.

Definition at line 103 of file app/util/zigbee-framework/zigbee-device-common.h

sl_zigbee_active_endpoints_request#

sl_status_t sl_zigbee_active_endpoints_request (sl_802154_short_addr_t target, sl_zigbee_aps_option_t options)

Request the specified node to send a list of its active endpoints. An active endpoint is one for which a simple descriptor is available.

Parameters

N/A	target	The node whose active endpoints are desired.
N/A	options	The options to use when sending the request. See sl_zigbee_send_unicast() for a description.

Returns

An sl_status_t value. ::SL_STATUS_OK, ::SL_STATUS_ALLOCATION_FAILED, ::SL_STATUS_NETWORK_DOWN or ::SL_STATUS_BUSY.

Definition at line 120 of file app/util/zigbee-framework/zigbee-device-common.h

Binding Manager Functions Documentation#

sl_zigbee_bind_request#

sl_status_t sl_zigbee_bind_request (sl_802154_short_addr_t target, sl_802154_long_addr_t source, uint8_t sourceEndpoint, uint16_t clusterId, uint8_t type, sl_802154_long_addr_t destination, sl_zigbee_multicast_id_t groupAddress, uint8_t destinationEndpoint, sl_zigbee_aps_option_t options)

Send a request to create a binding entry with the specified contents on the specified node.

Parameters

N/A	target	The node on which the binding will be created.
N/A	source	The source EUI64 in the binding entry.
N/A	sourceEndpoint	The source endpoint in the binding entry.
N/A	clusterId	The cluster ID in the binding entry.
N/A	type	The type of binding, either UNICAST_BINDING, MULTICAST_BINDING, or UNICAST_MANY_TO_ONE_BINDING. UNICAST_MANY_TO_ONE_BINDING is an Ember-specific extension and should be used only when the target is an Ember device.
N/A	destination	The destination EUI64 in the binding entry for UNICAST_BINDING or UNICAST_MANY_TO_ONE_BINDING.
N/A	groupAddress	The group address for the MULTICAST_BINDING.
N/A	destinationEndpoint	The destination endpoint in the binding entry for the UNICAST_BINDING or UNICAST_MANY_TO_ONE_BINDING.
N/A	options	The options to use when sending the request. See sl_zigbee_send_unicast() for a description.

Returns

An sl_status_t value. ::SL_STATUS_OK, ::SL_STATUS_ALLOCATION_FAILED, ::SL_STATUS_NETWORK_DOWN or ::SL_STATUS_BUSY.

Definition at line 158 of file app/util/zigbee-framework/zigbee-device-common.h

sl_zigbee_unbind_request#

sl_status_t sl_zigbee_unbind_request (sl_802154_short_addr_t target, sl_802154_long_addr_t source, uint8_t sourceEndpoint, uint16_t clusterId, uint8_t type, sl_802154_long_addr_t destination, sl_zigbee_multicast_id_t groupAddress, uint8_t destinationEndpoint, sl_zigbee_aps_option_t options)

Send a request to remove a binding entry with the specified contents from the specified node.

Parameters

N/A	target	The node on which the binding will be removed.
N/A	source	The source EUI64 in the binding entry.
N/A	sourceEndpoint	The source endpoint in the binding entry.
N/A	clusterId	The cluster ID in the binding entry.
N/A	type	The type of binding, either UNICAST_BINDING, MULTICAST_BINDING, or UNICAST_MANY_TO_ONE_BINDING. UNICAST_MANY_TO_ONE_BINDING is an Ember-specific extension and should be used only when the target is an Ember device.
N/A	destination	The destination EUI64 in the binding entry for the UNICAST_BINDING or UNICAST_MANY_TO_ONE_BINDING.
N/A	groupAddress	The group address for the MULTICAST_BINDING.
N/A	destinationEndpoint	The destination endpoint in the binding entry for the UNICAST_BINDING or UNICAST_MANY_TO_ONE_BINDING.
N/A	options	The options to use when sending the request. See sl_zigbee_send_unicast() for a description.

Returns

An ::sl_status_t value.
- ::SL_STATUS_OK
- ::SL_STATUS_ALLOCATION_FAILED _ ::SL_STATUS_NETWORK_DOWN
- ::SL_STATUS_BUSY

Definition at line 224 of file app/util/zigbee-framework/zigbee-device-common.h

Node Manager Functions Documentation#

sl_zigbee_lqi_table_request#

sl_status_t sl_zigbee_lqi_table_request (sl_802154_short_addr_t target, uint8_t startIndex, sl_zigbee_aps_option_t options)

Parameters

N/A	target	The node whose LQI table is desired.
N/A	startIndex	The index of the first neighbor to include in the response.
N/A	options	The options to use when sending the request. See sl_zigbee_send_unicast() for a description.

Returns

An sl_status_t value. ::SL_STATUS_OK, ::SL_STATUS_ALLOCATION_FAILED, ::SL_STATUS_NETWORK_DOWN or ::SL_STATUS_BUSY.

Definition at line 275 of file app/util/zigbee-framework/zigbee-device-common.h

sl_zigbee_routing_table_request#

sl_status_t sl_zigbee_routing_table_request (sl_802154_short_addr_t target, uint8_t startIndex, sl_zigbee_aps_option_t options)

Parameters

N/A	target	The node whose routing table is desired.
N/A	startIndex	The index of the first route entry to include in the response.
N/A	options	The options to use when sending the request. See sl_zigbee_send_unicast() for a description.

Returns

An sl_status_t value. ::SL_STATUS_OK, ::SL_STATUS_ALLOCATION_FAILED, ::SL_STATUS_NETWORK_DOWN or ::SL_STATUS_BUSY.

Definition at line 305 of file app/util/zigbee-framework/zigbee-device-common.h

sl_zigbee_binding_table_request#

sl_status_t sl_zigbee_binding_table_request (sl_802154_short_addr_t target, uint8_t startIndex, sl_zigbee_aps_option_t options)

Parameters

N/A	target	The node whose binding table is desired.
N/A	startIndex	The index of the first binding entry to include in the response.
N/A	options	The options to use when sending the request. See sl_zigbee_send_unicast() for a description.

Returns

An sl_status_t value. ::SL_STATUS_OK, ::SL_STATUS_ALLOCATION_FAILED, ::SL_STATUS_NETWORK_DOWN or ::SL_STATUS_BUSY.

Definition at line 331 of file app/util/zigbee-framework/zigbee-device-common.h

sl_zigbee_leave_request#

sl_status_t sl_zigbee_leave_request (sl_802154_short_addr_t target, sl_802154_long_addr_t deviceAddress, uint8_t leaveRequestFlags, sl_zigbee_aps_option_t options)

Request the specified node to remove the specified device from the network. The device to be removed must be the node to which the request is sent or one of its children.

Parameters

N/A	target	The node which will remove the device.
N/A	deviceAddress	All zeros if the target is to remove itself from the network or the EUI64 of a child of the target device to remove that child.
N/A	leaveRequestFlags	A bitmask of leave options. Include LEAVE_REQUEST_REMOVE_CHILDREN_FLAG if the target is to remove their children and/or LEAVE_REQUEST_REJOIN_FLAG if the target is to rejoin the network immediately after leaving.
N/A	options	The options to use when sending the request. See sl_zigbee_send_unicast() for a description.

Returns

An sl_status_t value. ::SL_STATUS_OK, ::SL_STATUS_ALLOCATION_FAILED, ::SL_STATUS_NETWORK_DOWN or ::SL_STATUS_BUSY.

Definition at line 358 of file app/util/zigbee-framework/zigbee-device-common.h

sl_zigbee_permit_joining_request#

sl_status_t sl_zigbee_permit_joining_request (sl_802154_short_addr_t target, uint8_t duration, uint8_t authentication, sl_zigbee_aps_option_t options)

Request the specified node to allow or disallow association.

Parameters

N/A	target	The node which will allow or disallow association. The request can be broadcast by using a broadcast address (0xFFFC/0xFFFD/0xFFFF). No response is sent if the request is broadcast.
N/A	duration	A value of 0x00 disables joining. A value of 0xFF enables joining. Any other value enables joining for that number of seconds.
N/A	authentication	Controls Trust Center authentication behavior.
N/A	options	The options to use when sending the request. See sl_zigbee_send_unicast() for a description. This parameter is ignored if the target is a broadcast address.

Returns

An sl_status_t value. ::SL_STATUS_OK, ::SL_STATUS_ALLOCATION_FAILED, ::SL_STATUS_NETWORK_DOWN or ::SL_STATUS_BUSY.

Definition at line 379 of file app/util/zigbee-framework/zigbee-device-common.h

Decode Address Response Messages Documentation#

sl_zigbee_decode_address_response#

sl_802154_short_addr_t sl_zigbee_decode_address_response (uint8_t responseLength, uint8_t * response, sl_802154_long_addr_t eui64Return)

Parameters

N/A	responseLength	The length of the received ZDO message.
N/A	response	The received ZDO message with cluster ID NETWORK_ADDRESS_RESPONSE or IEEE_ADDRESS_RESPONSE.
N/A	eui64Return	The EUI64 from the response is copied here.

Extract the EUI64 and the node ID from an address response message.

Returns

Returns the node ID from the response if the response status was SL_ZIGBEE_ZDP_SUCCESS. Otherwise, returns SL_ZIGBEE_NULL_NODE_ID.

Definition at line 401 of file app/util/zigbee-framework/zigbee-device-common.h

Macro Definition Documentation#

ZDO_MESSAGE_OVERHEAD#

#define ZDO_MESSAGE_OVERHEAD

Value:

ZDO messages start with a sequence number.

Definition at line 29 of file app/util/zigbee-framework/zigbee-device-common.h

Function Documentation#

sl_zigbee_set_zig_dev_request_radius#

void sl_zigbee_set_zig_dev_request_radius (uint8_t radius)

Change the default radius for broadcast ZDO requests.

Parameters

N/A

radius

The radius to be used for future ZDO request broadcasts.

Definition at line 413 of file app/util/zigbee-framework/zigbee-device-common.h

sl_zigbee_get_zig_dev_request_radius#

uint8_t sl_zigbee_get_zig_dev_request_radius (void )

Retrieve the default radius for broadcast ZDO requests.

Parameters

N/A

Returns

The radius to be used for future ZDO request broadcasts.

Definition at line 420 of file app/util/zigbee-framework/zigbee-device-common.h

sl_zigbee_get_last_zig_dev_request_sequence#

uint8_t sl_zigbee_get_last_zig_dev_request_sequence (void )

Provide access to the application ZDO transaction sequence number for last request. This function has been deprecated and replaced by sl_zigbee_get_last_app_zig_dev_request_sequence().

Parameters

N/A

Returns

Last application ZDO transaction sequence number used

Definition at line 428 of file app/util/zigbee-framework/zigbee-device-common.h

sl_zigbee_get_last_app_zig_dev_request_sequence#

uint8_t sl_zigbee_get_last_app_zig_dev_request_sequence (void )

Provide access to the application ZDO transaction sequence number for last request.

Parameters

N/A

Returns

Last application ZDO transaction sequence number used

Definition at line 443 of file app/util/zigbee-framework/zigbee-device-common.h