Revision History#
Revisi on No. | Version No. | Date | Changes |
|---|---|---|---|
1 | v1.0 | November 2017 | Advance version |
2 | v1.1 | Feb 2018 | Formatting changes |
3 | v1.2 | April 2018 | Generalized for Wiseconnect and Wisemcu |
4 | v1.3 | June 2018 | 1. Old thread of figures were replaced with new ones, |
2. Response codes are updated 3. Alignment issues are resolved | |||
5 | v1.4 | July 2018 | 1. Reviewed and updated Commands and event formats |
2. Added command , command response and event id's | |||
3. Structural changes are done | |||
6 | v1.5 | September 2018 | 1. Added ext_custom_feat_bitmap field and modified feature bitmap description in opermode command |
2. Added a2dp burst mode command and more data req event related information | |||
3. Added BT A2DP error commands 4. Added Device ID command 5. Segregation of features for different products | |||
7 | v1.6 | March 2019 | Deleted the Zigbee section |
8 | v1.7 | May 2019 | Added BT HID Device related commands |
9 | v1.8 | July 2019 | Added BT HID Device related AT commands |
10 | v1.9 | September 2019 | 1. Updated BT feature bitmap for 3mbps, 2mpbs and Sniff mode configurations |
2. Updated BT Feature bitmap for Sniff feature and Noise figure feature configurations | |||
11 | v1.10 | December 2019 | Added BLE CW mode support |
12 | v1.11 | December 2019 | Added AT command to change the BLE MTU size |
13 | v1.12 | Feb 2020 | Added a Note in EXT_TCP_IP_FEATURE_BITMAP in oper mode Added configure_feature_bit_map in set operating mode |
14 | v2.0 | Sep 2020 | 1. Added AT mode based "HID conn process with SSP mode enabled". |
2. Removed 'Related Resources' section. | |||
3. Moved 'SPI Interface', 'UART Interface', 'USB Interface' sections to 'Host Interfaces'. | |||
4. Renamed document name from 'Embedded BT Classic Software Programming Reference Manual (PRM)' to 'RS9116W BT Classic AT Command Programming Reference Manual'. | |||
5. Removed all Binary Commands. | |||
6. Updated 384k mode. | |||
7. Added note in BT Opermode command. | |||
8. Added note in RSSI signal strength. | |||
9. Removed SDIO, USB, SPI interfaces from Host Interfaces section. | |||
10. Added 'Changes/Enhancements in BT AT Commands, Configurations and Mechanisms' section. | |||
11 . Added length for each AT CMD (parameters and responses.) | |||
15 | v2.1 | Jan 2021 | 1. Added BT Events/Commands for USRLINKKEYSAVE, AUTHENTICATION_STATUS, MODECHANGED and DISCONNECTED in section 6 BT Classic Commands. |
2. Removed SPI and USB host interaction and Bypass Mode in SPI / USB details from section 2 Bootloader. | |||
3. Updated the section 5 BT Classic Command Format with by mentioning A2DP, AVRCP and HFP command/response/event IDs are not supported in this document version. | |||
16 | v2.3 | Feb 2021 | 1. Added description for config_feature_bitmap[25:24] .Refer section 6.1.1. |
17 | v2.4 | Jun 2021 | 1. Removed spaces in the command format and examples. And also added examples for some of the commands, which are not present. |
2. Added more information to some of the commands. | |||
3. Modified at+rsibt_bredrtransmit example with correct values. | |||
4. Given explanation to the response parameters of at+rsibt_perstats command. | |||
5. Added an error code -0x4E66 -Invalid Name length when set to more than 16 bytes | |||
6. Added Tabular format for the parameters more than 3 of all BT Classic commands and Events. | |||
7. Added a note to the A2dp and Avrcp commands that "This commands are not supported in the current release" | |||
8. Added a note in the opermode command, stating that which values are supporting in this release. | |||
18 | v2.5 | Dec 2021 | 1. Added new command at+rsibt_updategaintableoffsetMaxpower. |
2. Added new command at+rsibt_adddeviceid. | |||
3. Corrected Inquiry Response Event Format at+rsibt_inqresp. |