Supports Wi-Fi Station, Access Point features, and Concurrent mode (STA + AP) features.
WPA3 Personal Mode
WPA3 Personal Transition mode
EAP (TLS1.2, TLS1.0, TTLS, PEAP)
WPS 2.0 push button
Supports auto rate, dual band, re-join, 802.11j, 802.11d, selective scan, RSSI support.
Supports BSD socket interface.
Supports crypto hardware accelerators for ECDH, DH, SHA, AES.
Supports Open security mode, WPA2 security mode and hidden SSID mode.
Firmware Upgrade Options#
via bootloader, Host/MCU and Wireless (OTA).
IPV4, ICMP, ARP, UDP, TCP, IGMP, DHCP Client, DHCP Server, HTTP Client, HTTPs Client, HTTP Server, ping from host, TCP/IP bypass, FTP Client, SSL/TLS1.2(Client and server), SNTP, MQTT Client, Web sockets Client.
Supports dynamic feature Enable/Disable through opermode command during the initialization.
Master, Slave, BT Dual mode and Role switch support.
BDR1, BDR2, BDR3 etc.
ACL Data, Encryption, Slot offset, Adaptive frequency hopping, AFH channel classification, Enhanced data rate ACL, Simple pairing.
Role switch (Master/Slave), sniff mode, RSSI support.
SSP (secure pairing) support.
Profiles: GAP, SDP, L2CAP, SPP, RFCOMM, A2DP, AVRCP, HID (only in AT commands).
Bluetooth Dual mode support.
BLE Peripheral, BLE Central with multiple peripheral support.
Advertising, Scanning, Connection interval.
32-bit UUID support in LE, LE secure connections, Data length extensions.
LE 2Mbps, LE long range, LE channel classification.
Profiles: GATT, GAP, BPM (Blood pressure monitor), PXP (proximity), HOGP HID over GATT
BLP Blood pressure profile & service, HTS/HTP health thermometer profile & service, HRP/HRS Heart rate profile& service, CGMP/CGMS continuous glucose monitoring profile & service
Supports the following operating modes:
WLAN STATION + BLE
WLAN STATION + BT
WLAN STATION + BT + BLE
GPIO based power save, Message-based power save.
Host based wakeup, WoWLAN, packet pending interrupt for UART and SPI.
PTA 3-wire Co-Existence Support for Wi-Fi only mode