Firmware Update from Module#

This section provides a reference to the APIs used to perform firmware updates from the module.

Functions#

sl_status_t

sl_si91x_ota_firmware_upgradation(sl_ip_address_t server_ip, uint16_t server_port, uint16_t chunk_number, uint16_t timeout, uint16_t tcp_retry_count, bool asynchronous)

Create an OTAF client.

sl_status_t

sl_si91x_http_otaf(uint8_t type, uint8_t flags, uint8_t *ip_address, uint16_t port, uint8_t *resource, uint8_t *host_name, uint8_t *extended_header, uint8_t *user_name, uint8_t *password, uint8_t *post_data, uint32_t post_data_length)

Post the HTTP data for the requested URL to HTTP server.This is a non-blocking API.

Function Documentation#

sl_si91x_ota_firmware_upgradation#

sl_status_t sl_si91x_ota_firmware_upgradation (sl_ip_address_t server_ip, uint16_t server_port, uint16_t chunk_number, uint16_t timeout, uint16_t tcp_retry_count, bool asynchronous)

Create an OTAF client.

Parameters

[in]	server_ip	OTAF server IP address sl_ip_address_t
[in]	server_port	OTAF server port number.
[in]	chunk_number	Firmware content request chunk number.
[in]	timeout	TCP receive packet timeout.
[in]	tcp_retry_count	TCP retransmissions count.
[in]	asynchronous	OTAF upgrade done aynchronously when this is set, else synchronous upgrade.

Initialize the client with a given configuration.

Pre-conditions:
- sl_net_up API needs to be called before this API.

Returns

sl_status_t. See https://docs.silabs.com/gecko-platform/4.1/common/api/group-status for details.

Note

For safe firmware upgrade via TCP server,
- it will take approx. 65 sec duration for upgrading the firmware of 1.5 MB file.
This is an asynchronous API. The response is recieved via sl_net_event_handler_t with SL_NET_OTA_FW_UPDATE_EVENT as event

Definition at line 660 of file components/device/silabs/si91x/wireless/inc/sl_si91x_driver.h

sl_si91x_http_otaf#

sl_status_t sl_si91x_http_otaf (uint8_t type, uint8_t flags, uint8_t * ip_address, uint16_t port, uint8_t * resource, uint8_t * host_name, uint8_t * extended_header, uint8_t * user_name, uint8_t * password, uint8_t * post_data, uint32_t post_data_length)

Post the HTTP data for the requested URL to HTTP server.This is a non-blocking API.

Parameters

[in]	type	Server IP address.
[in]	flags	Port number. Default : 80 - HTTP, 443 - HTTPS
[in]	ip_address	Requested resource URL in string format.
[in]	port	Host name.
[in]	resource	Extender header if present, after each header member append \r
[in]	host_name	Username for server authentication.
[in]	extended_header	Password for server authentication.
[in]	user_name	HTTP data to be posted to server.
[in]	password	HTTP data length to be posted to server.
N/A	post_data
N/A	post_data_length


Flags	Macro	Description
BIT(0)	HTTPS_SUPPORT	Set this bit to enable HTTPS_SUPPORT to use HTTPS feature.
BIT(1)	SSL_ENABLE	Set this bit to enable SSL feature.
BIT(2)	SI91X_TLS_V_1_0	Set this bit to support SSL TLS Version 1.0 if HTTPS is enabled.
BIT(3)	IPV6	Set this bit to enable IPv6, by default it is configured to IPv4.
BIT(4)	SI91X_TLS_V_1_1	Set this bit to support SSL_TLS Version 1.1 if HTTPS is enabled.
BIT(5)	HTTP_POST_DATA	Set this bit to enable Http_post large data feature.
BIT(6)	HTTP_V_1_1	Set this bit to use HTTP version 1.1

Returns

sl_status_t. See https://docs.silabs.com/gecko-platform/4.1/common/api/group-status for details.

Definition at line 77 of file components/device/silabs/si91x/wireless/firmware_upgrade/firmware_upgradation.h