Device Feature Bitmap#

This section provides a reference to the SiWx91x device feature bitmap in the boot configuration.

Macros#

#define

SL_SI91X_FEAT_SECURITY_OPEN BIT(0)

Security type open.

#define

SL_SI91X_FEAT_SECURITY_PSK BIT(1)

Security type WPA/WPA2.

#define

SL_SI91X_FEAT_AGGREGATION BIT(2)

Aggregation support.

#define

SL_SI91X_FEAT_LP_GPIO_BASED_HANDSHAKE BIT(3)

LP mode GPIO handshake.

#define

SL_SI91X_FEAT_ULP_GPIO_BASED_HANDSHAKE BIT(4)

ULP mode GPIO based handshake.

#define

SL_SI91X_FEAT_DEV_TO_HOST_ULP_GPIO_1 BIT(5)

To select ULP GPIO 1 for wake up indication.

#define

SL_SI91X_FEAT_RF_SUPPLY_VOL_3_3_VOLT BIT(6)

To supply 3.3 volt supply.

#define

SL_SI91X_FEAT_WPS_DISABLE BIT(7)

To Disable WPS in AP mode.

#define

SL_SI91X_FEAT_EAP_LEAP_IN_COEX BIT(8)

To enable EAP-LEAP mode.

#define

SL_SI91X_FEAT_HIDE_PSK_CREDENTIALS BIT(9)

To hide sensitive information (PSK, PMK, EAP credentials)

#define

SL_SI91X_FEAT_SSL_HIGH_STREAMING_BIT BIT(10)

To enable high SSL streaming throughput.

#define

SL_SI91X_FEAT_LONG_ICMP_PACKET BIT(12)

To enable support for long sized ICMP packets.

#define

SL_SI91X_FEAT_TRANSCEIVER_MAC_PEER_DS_SUPPORT BIT(13)

Enable support to store peer information in the MAC layer.

#define

SL_SI91X_FEAT_LONG_HTTP_URL BIT(14)

To enable support for the Long HTTP GET URL. Maximum URL supported is 2048 bytes.

#define

SL_SI91X_FEAT_DISABLE_11AX_SUPPORT BIT(15)

To disable 11ax connections, i.e. force connection in 11ac or lower.

#define

SL_SI91X_FEAT_SECURE_ATTESTATION BIT(30)

Secure Attestation.