Test Mode#

Modules#

rsi_ble_per_transmit_s

rsi_ble_per_receive_s

Typedefs#

Functions#

int32_t
rsi_ble_rx_test_mode(uint8_t rx_channel, uint8_t phy, uint8_t modulation)

Start the BLE RX test mode in controller.

int32_t
rsi_ble_tx_test_mode(uint8_t tx_channel, uint8_t phy, uint8_t tx_len, uint8_t mode)

Start the BLE TX test mode in controller.

int32_t
rsi_ble_end_test_mode(uint16_t *num_of_pkts)

Stop the BLE TX / RX test mode in controller.

int32_t
rsi_ble_per_transmit(struct rsi_ble_per_transmit_s *rsi_ble_per_tx)

Initiate the BLE transmit PER mode in the controller.

int32_t
rsi_ble_per_receive(struct rsi_ble_per_receive_s *rsi_ble_per_rx)

Initiate the BLE receive PER mode in the controller.

Typedef Documentation#

rsi_ble_per_transmit_t#

typedef struct rsi_ble_per_transmit_s rsi_ble_per_transmit_t

Definition at line 1226 of file components/device/silabs/si91x/wireless/ble/inc/rsi_ble_apis.h

rsi_ble_per_receive_t#

typedef struct rsi_ble_per_receive_s rsi_ble_per_receive_t

Definition at line 1318 of file components/device/silabs/si91x/wireless/ble/inc/rsi_ble_apis.h

Function Documentation#

rsi_ble_rx_test_mode#

int32_t rsi_ble_rx_test_mode (uint8_t rx_channel, uint8_t phy, uint8_t modulation)

Start the BLE RX test mode in controller.

Parameters
[in]rx_channel

- Channel in which packet have to be received (0 - 39)

[in]phy

- 0x00 Reserved for future use 0x01 Receiver set to use the LE 1M PHY 0x02 Receiver set to use the LE 2M PHY 0x03 Receiver set to use the LE Coded PHY (0x04 - 0xFF) Reserved for future use.

[in]modulation

- 0x00 Assume transmitter will have a standard standard modulation index 0x01 Assume transmitter will have a stable modulation index (0x02 - 0xFF) Reserved for future use

This is a Blocking API Returns

  • The following values are returned:

    • 0 - Success

    • Non-Zero Value - Failure

Note


Definition at line 2484 of file components/device/silabs/si91x/wireless/ble/inc/rsi_ble_apis.h

rsi_ble_tx_test_mode#

int32_t rsi_ble_tx_test_mode (uint8_t tx_channel, uint8_t phy, uint8_t tx_len, uint8_t mode)

Start the BLE TX test mode in controller.

Parameters
[in]tx_channel

- RF Channel (0-39).

[in]phy

- 0x00 Reserved for future use

  • 0x01 Transmitter set to use the LE 1M PHY

  • 0x02 Transmitter set to use the LE 2M PHY

  • 0x03 Transmitter set to use the LE Coded PHY with S=8 data coding

  • 0x04 Transmitter set to use the LE Coded PHY with S=2 data coding

  • (0x05 - 0xFF) Reserved for future use.

[in]tx_len

- Length in bytes of payload data in each packet ( 1 - 251 bytes).

[in]mode

- 0x00 PRBS9 sequence '11111111100000111101...'

  • 0x01 Repeated '11110000'

  • 0x02 Repeated '10101010'

  • 0x03 PRBS15

  • 0x04 Repeated '11111111'

  • 0x05 Repeated '00000000'

    • 0x06 Repeated '00001111'

    • 0x07 Repeated '01010101'

  • 0x08 - 0xFF Reserved for future use

This is a Blocking API Returns

  • The following values are returned:

    • 0 - Success

    • Non-Zero Value - Failure

Note


Definition at line 2513 of file components/device/silabs/si91x/wireless/ble/inc/rsi_ble_apis.h

rsi_ble_end_test_mode#

int32_t rsi_ble_end_test_mode (uint16_t * num_of_pkts)

Stop the BLE TX / RX test mode in controller.

Parameters
[out]num_of_pkts

- Number of RX packets received are displayed when RX test is stopped

This is a Blocking API Returns

  • The following values are returned:

    • 0 - Success

    • Non-Zero Value - Failure

Note


Definition at line 2525 of file components/device/silabs/si91x/wireless/ble/inc/rsi_ble_apis.h

rsi_ble_per_transmit#

int32_t rsi_ble_per_transmit (struct rsi_ble_per_transmit_s * rsi_ble_per_tx)

Initiate the BLE transmit PER mode in the controller.

Parameters
[in]rsi_ble_per_tx

- This parameter is the buffer to hold the structure values This is a structure variable of struct rsi_ble_per_transmit_s

This is a Blocking API

  • Pre-conditions: Device should be initialized before calling this API.

Returns

  • The following values are returned:

    • 0 - Success

    • Non-Zero Value - Failure

Note


Definition at line 2540 of file components/device/silabs/si91x/wireless/ble/inc/rsi_ble_apis.h

rsi_ble_per_receive#

int32_t rsi_ble_per_receive (struct rsi_ble_per_receive_s * rsi_ble_per_rx)

Initiate the BLE receive PER mode in the controller.

Parameters
[in]rsi_ble_per_rx

- This parameter is the buffer to hold the structure values This is a structure variable of struct rsi_ble_per_receive_s

This is a Blocking API

  • Pre-conditions: Device should be initialized before calling this API.

Returns

  • The following values are returned:

    • 0 - Success

    • Non-Zero Value - Failure

Note


Definition at line 2555 of file components/device/silabs/si91x/wireless/ble/inc/rsi_ble_apis.h