Test Certification Generation#

  1. Register for an account (for test certificate generation) at http://www.certicom.com/index.php/gencertregister. This registration is valid for a limited time.

  2. Log in to the test certificate generation site with your account login:

    http://www.certicom.com/index.php/devicelogin

  3. Go to the certificate generation page:

    ECC 163k1 curve-based Certificates: http://www.certicom.com/index.php/smartenergydevicecertificateservice

    ECC 283k1 curve-based Certificates: http://www.certicom.com/index.php/smartenergydevicecertificateservice1dot2

  4. In the Subject ID field, enter the MAC address (EUI64) of the target device where the certificate will reside (MSB order, such as 000D6F... for Silicon Labs EUI64s). This can be different than your target node's current EUI64, but if the address differs, the current one will generally be overwritten during programming.

  5. ECC 163k1 curve-based Certificates:

    1. In the Profile Attribute Data field, enter any custom hex data you want associated with this device. (The recommended format is profile ID [0109] + cert type [1 for test] + 16-bit Zigbee Manufacturer Code + optional customer data of any length.)

    2. Leave the Public Key field empty!

  6. ECC 283k1 curve-based Certificates:

    1. Leave the Lifetime field empty.

    2. Check the Key Agreement checkbox.

    3. Leave the Override Certificate Attributes field empty.

    4. Leave the Public Key Contribution field empty.

  7. Click Generate.

  8. Highlight and copy the text in the HTML table on the resulting page.

  9. Open a text editor and paste the contents of the table into the text file; save the file.