Driver#

Functions#

int8_t

rsi_common_cb_init(rsi_common_cb_t *common_cb)

Initialize common control block structure.

int32_t

rsi_driver_common_send_cmd(rsi_common_cmd_request_t cmd, rsi_pkt_t *pkt)

Fill commands and places into wlan TX queue.

int32_t

rsi_driver_process_common_recv_cmd(rsi_pkt_t *pkt)

Process commands related to common block.

void

rsi_handle_slp_wkp(uint8_t frame_type)

Handle sleep and wakeup.

int8_t

rsi_req_wakeup(void)

Set wakeup GPIO high and wait for wakeup confirmation pin to get set.

int8_t

rsi_wait4wakeup(void)

Set wakeup GPIO high and waits for wakeup confirmation pin to get set.

void

rsi_allow_sleep(void)

Set wakeup GPIO low .

void

rsi_powersave_gpio_init(void)

Initialize GPIOs used in power save .

void

rsi_common_packet_transfer_done(rsi_pkt_t *pkt)

Handle packet transfer completion which has an asyncronous response.

int32_t

rsi_sleep_mode_decision(rsi_common_cb_t *rsi_common_cb)

A handler which decides the power mode to program and change.

int32_t

rsi_send_ps_mode_to_module(uint8_t selected_ps_mode, uint8_t selected_ps_type)

Send the power save command to module

rsi_error_t

rsi_wait_on_common_semaphore(rsi_semaphore_handle_t *semaphore, uint32_t timeout_ms)

Wireless library to acquire or wait for common semaphore.

int32_t

rsi_check_and_update_cmd_state(uint8_t cmd_type, uint8_t cmd_state)

This API is used by wireless library to check and update the command state to progress state.

void

rsi_post_waiting_common_semaphore(void)

releases all the common semaphores which are on semaphore wait

void

rsi_post_waiting_bt_semaphore(void)

Releases the all bt ,prop_protocol ,ble semaphores.

int32_t

rsi_release_waiting_semaphore(void)

Releases all common ,wlan and nwk semaphores which are on waiting.

void

rsi_check_pkt_queue_and_dequeue(void)

Check the packet queues and dequeues the packet.

void

rsi_free_queue_pkt(uint8_t pkt_dequeued, rsi_pkt_t *pkt)

free the queued packet.

void

rsi_error_timeout_and_clear_events(int32_t error, uint32_t cmd_type)

Clear the event and gives timeout error.

int32_t

rsi_check_waiting_cmds(rsi_rsp_waiting_cmds_t *response)

Check the commands which are waiting for the response and sets the flag.

int16_t

rsi_secure_ping_pong_wr(uint32_t ping_pong, uint8_t *src_addr, uint16_t size_param)

Write the given data to the specified register address in the Module. This API writes the given data in ping or pong buffer.

int16_t

rsi_bl_waitfor_boardready(void)

This API checks for the readiness of the bootloader to receive the commands from the host.

int16_t

rsi_bl_select_option(uint8_t cmd)

Send firmware load request to module or update default configurations.

int32_t

rsi_set_fast_fw_up(void)

Fast setting of fw_up.

int16_t

rsi_bootloader_instructions(uint8_t type, uint16_t *data)

Send boot instructions to module.

void

rsi_interrupt_handler(void)

Handle the interrupt coming from the module.

void

rsi_mask_ta_interrupt(void)

Mask the TA interrupt.

void

rsi_unmask_ta_interrupt(void)

Unmask the TA interrupt.

void

rsi_rx_event_handler(void)

Read the packet from module and process RX packet.

void

rsi_set_event(uint32_t event_num)

Set an event.

void

rsi_clear_event(uint32_t event_num)

Clear an event.

void

rsi_mask_event(uint32_t event_num)

Mask an event specified using the event number.

uint32_t

rsi_find_event(uint32_t event_map)

Find the event which is set from the event map.

uint16_t

rsi_register_event(uint32_t event_id, void(*event_handler_ptr)(void))

void

rsi_set_event_from_isr(uint32_t event_num)

Set the event from isr context.

void

rsi_events_init(void)

Initialize the events.

void

ROM_WL_rsi_set_event(global_cb_t *global_cb_p, uint32_t event_num)

Set an event.

void

ROM_WL_rsi_clear_event(global_cb_t *global_cb_p, uint32_t event_num)

Clear an event.

void

ROM_WL_rsi_mask_event(global_cb_t *global_cb_p, uint32_t event_num)

Mask an event.

void

ROM_WL_rsi_unmask_event(global_cb_t *global_cb_p, uint32_t event_num)

Unmask an event.

uint32_t

ROM_WL_rsi_find_event(global_cb_t *global_cb_p, uint32_t event_map)

Find the event which is set from the map.

uint16_t

ROM_WL_rsi_register_event(global_cb_t *global_cb_p, uint32_t event_id, void(*event_handler_ptr)(void))

void

ROM_WL_rsi_set_event_from_isr(global_cb_t *global_cb_p, uint32_t event_num)

Set an event from ISR.

void

ROM_WL_rsi_unmask_event_from_isr(global_cb_t *global_cb_p, uint32_t event_num)

Unmask an event from ISR.

int32_t

rsi_pkt_pool_init(rsi_pkt_pool_t *pool_cb, uint8_t *buffer, uint32_t total_size, uint32_t pkt_size)

Initialize/create packet pool from the provided buffer.

rsi_pkt_t *

rsi_pkt_alloc(rsi_pkt_pool_t *pool_cb)

Allocate packet from a given packet pool.

int32_t

rsi_pkt_free(rsi_pkt_pool_t *pool_cb, rsi_pkt_t *pkt)

Free the packet.

uint32_t

rsi_is_pkt_available(rsi_pkt_pool_t *pool_cb)

Return number of available packets in pool.

int32_t

ROM_WL_rsi_pkt_pool_init(global_cb_t *global_cb_p, rsi_pkt_pool_t *pool_cb, uint8_t *buffer, uint32_t total_size, uint32_t pkt_size)

Initialize/create packet pool from the provided buffer.

rsi_pkt_t *

ROM_WL_rsi_pkt_alloc_non_blocking(global_cb_t *global_cb_p, rsi_pkt_pool_t *pool_cb)

Allocate packet from a given packet pool.

int32_t

ROM_WL_rsi_pkt_free_non_blocking(global_cb_t *global_cb_p, rsi_pkt_pool_t *pool_cb, rsi_pkt_t *pkt)

Free the packet.

rsi_pkt_t *

ROM_WL_rsi_pkt_alloc(global_cb_t *global_cb_p, rsi_pkt_pool_t *pool_cb)

Allocate packet from a given packet pool.

int32_t

ROM_WL_rsi_pkt_free(global_cb_t *global_cb_p, rsi_pkt_pool_t *pool_cb, rsi_pkt_t *pkt)

Free the packet.

uint32_t

ROM_WL_rsi_is_pkt_available(global_cb_t *global_cb_p, rsi_pkt_pool_t *pool_cb)

Return number of avaiable packets in pool.

Function Documentation#

rsi_common_cb_init#

int8_t rsi_common_cb_init (rsi_common_cb_t * common_cb)

Initialize common control block structure.

Parameters

[in]

common_cb

- pointer to common cb structure

Returns

0 - Success Non-Zero Value - Failure

Definition at line 45 of file driver/rsi_common.c

rsi_driver_common_send_cmd#

int32_t rsi_driver_common_send_cmd (rsi_common_cmd_request_t cmd, rsi_pkt_t * pkt)

Fill commands and places into wlan TX queue.

Parameters

[in]	cmd	- type of the command to send
[in]	pkt	- pointer of packet to send

Returns

0 - Success Non-Zero Value - Failure

Definition at line 113 of file driver/rsi_common.c

rsi_driver_process_common_recv_cmd#

int32_t rsi_driver_process_common_recv_cmd (rsi_pkt_t * pkt)

Process commands related to common block.

Parameters

[in]

pkt

- pointer to common block packet

Returns

0 - Success Non-Zero Value - Failure

Definition at line 427 of file driver/rsi_common.c

rsi_handle_slp_wkp#

void rsi_handle_slp_wkp (uint8_t frame_type)

Handle sleep and wakeup.

Parameters

[in]

frame_type

- Frame type

Returns

void

Definition at line 903 of file driver/rsi_common.c

rsi_req_wakeup#

int8_t rsi_req_wakeup (void )

Set wakeup GPIO high and wait for wakeup confirmation pin to get set.

Parameters

[in]

Returns

0 - Success Non-Zero Value - Failure

Definition at line 966 of file driver/rsi_common.c

References rsi_ulp_wakeup_init , rsi_driver_cb_non_rom::common_wait_bitmap , rsi_semaphore_wait , rsi_driver_cb_s::common_cb , rsi_common_cb_s::wakeup_gpio_sem , rsi_init_timer , rsi_timer_expired , and RSI_SUCCESS

Referenced by rsi_tx_event_handler , and rsi_rx_event_handler

rsi_wait4wakeup#

int8_t rsi_wait4wakeup (void )

Set wakeup GPIO high and waits for wakeup confirmation pin to get set.

Parameters

[in]

Returns

0 - Success Non-Zero Value - Failure

Definition at line 1022 of file driver/rsi_common.c

Referenced by rsi_tx_event_handler , and rsi_rx_event_handler

rsi_allow_sleep#

void rsi_allow_sleep (void )

Set wakeup GPIO low .

Parameters

[in]

Returns

void

Definition at line 1079 of file driver/rsi_common.c

rsi_powersave_gpio_init#

void rsi_powersave_gpio_init (void )

Initialize GPIOs used in power save .

Parameters

[in]

Returns

void

Definition at line 1101 of file driver/rsi_common.c

rsi_common_packet_transfer_done#

void rsi_common_packet_transfer_done (rsi_pkt_t * pkt)

Handle packet transfer completion which has an asyncronous response.

Parameters

[in]

pkt

- pointer to packet

Returns

void

Definition at line 1124 of file driver/rsi_common.c

rsi_sleep_mode_decision#

int32_t rsi_sleep_mode_decision (rsi_common_cb_t * rsi_common_cb)

A handler which decides the power mode to program and change.

Parameters

[in]

rsi_common_cb

- pointer to the common control block

Returns

0 - Success Non-Zero Value - Failure

Definition at line 1140 of file driver/rsi_common.c

Referenced by rsi_bt_power_save_profile , and rsi_wlan_power_save_with_listen_interval

rsi_send_ps_mode_to_module#

int32_t rsi_send_ps_mode_to_module (uint8_t selected_ps_mode, uint8_t selected_ps_type)

Send the power save command to module

Parameters

[in]	selected_ps_mode	- Select power save mode
[in]	selected_ps_type	- Select power save type

Returns

0 - Success Non-Zero Value - Failure

Definition at line 1239 of file driver/rsi_common.c

rsi_wait_on_common_semaphore#

rsi_error_t rsi_wait_on_common_semaphore (rsi_semaphore_handle_t * semaphore, uint32_t timeout_ms)

Wireless library to acquire or wait for common semaphore.

Parameters

[in]	semaphore	- Semaphore handle pointer
[in]	timeout_ms	- Maximum time to wait to acquire semaphore. If timeout_ms is 0 then wait till acquire semaphore.

Returns

0 - Success Non-Zero Value - Failure

Definition at line 1363 of file driver/rsi_common.c

rsi_check_and_update_cmd_state#

int32_t rsi_check_and_update_cmd_state (uint8_t cmd_type, uint8_t cmd_state)

This API is used by wireless library to check and update the command state to progress state.

Parameters

[in]	cmd_type	- Command type 1 - COMMON_CMD 2 - WLAN_CMD 3 - NWK_CMD
[in]	cmd_state	- command state 1 - IN_USE 2 - ALLOW

Returns

0 - Success Non-Zero Value - Failure

Definition at line 1392 of file driver/rsi_common.c

Referenced by rsi_wireless_init , rsi_cmd_uart_flow_ctrl , rsi_cmd_to_wr_comm_flash , rsi_cmd_m4_ta_secure_handshake , rsi_wireless_deinit , rsi_wireless_antenna , rsi_send_feature_frame_dyn , rsi_send_feature_frame , rsi_get_fw_version , rsi_get_module_type , rsi_common_debug_log , rsi_switch_proto , rsi_set_rtc_timer , rsi_get_ram_log , rsi_get_rtc_timer , rsi_set_config , rsi_assert , rsi_gpio_pininit , rsi_gpio_writepin , rsi_gpio_readpin , rsi_sha_pen , rsi_hmac_sha_pen , rsi_exponentiation , rsi_ecdh_point_multiplication , rsi_ecdh_point_addition , rsi_ecdh_point_subtraction , rsi_ecdh_point_double , rsi_ecdh_point_affine , rsi_dhcp_user_class , rsi_dns_req , rsi_dns_update , rsi_emb_mqtt_client_init , rsi_emb_mqtt_connect , rsi_emb_mqtt_publish , rsi_emb_mqtt_subscribe , rsi_emb_mqtt_unsubscribe , rsi_emb_mqtt_disconnect , rsi_emb_mqtt_destroy , rsi_ftp_connect , rsi_ftp_disconnect , rsi_ftp_file_write , rsi_ftp_file_write_content , rsi_ftp_file_read_aysnc , rsi_ftp_file_delete , rsi_ftp_file_rename , rsi_ftp_directory_create , rsi_ftp_directory_delete , rsi_ftp_directory_set , rsi_ftp_directory_list_async , rsi_ftp_mode_set , rsi_ftp_file_size_set , rsi_http_client_async , rsi_http_client_abort , rsi_http_client_put_create , rsi_http_client_put_delete , rsi_http_client_put_start , rsi_http_client_put_pkt , rsi_http_client_post_data , rsi_http_otaf_async , rsi_webpage_load , rsi_json_object_create , rsi_webpage_erase , rsi_json_object_delete , rsi_webpage_send , rsi_http_credentials , rsi_mdnsd_init , rsi_mdnsd_register_service , rsi_mdnsd_deinit , rsi_ota_firmware_upgradation , rsi_pop3_session_create_async , rsi_pop3_session_delete , rsi_pop3_get_mail_stats , rsi_pop3_get_mail_list , rsi_pop3_retrive_mail , rsi_pop3_mark_mail , rsi_pop3_unmark_mail , rsi_pop3_get_server_status , rsi_send_raw_data , rsi_smtp_client_create , rsi_smtp_client_mail_send_async , rsi_smtp_client_delete_async , rsi_sntp_client_create_async , rsi_sntp_client_gettime , rsi_sntp_client_gettime_date , rsi_sntp_client_server_info , rsi_sntp_client_delete_async , rsi_wlan_radio_init , rsi_wlan_filter_broadcast , rsi_config_timeout , rsi_wlan_scan_with_bitmap_options , rsi_wlan_scan_async_with_bitmap_options , rsi_wlan_scan , rsi_wlan_scan_async , rsi_wlan_connect , rsi_wlan_connect_async , rsi_wlan_bgscan_profile , rsi_wlan_execute_post_connect_cmds , rsi_wlan_wps_push_button_event , rsi_send_freq_offset , rsi_calib_write , rsi_wlan_wps_generate_pin , rsi_wlan_wps_enter_pin , rsi_get_random_bytes , rsi_wlan_disconnect , rsi_wlan_disconnect_stations , rsi_config_ipaddress , rsi_wlan_set_certificate_index , rsi_wlan_get , rsi_wlan_set , rsi_wlan_buffer_config , rsi_wlan_ap_start , rsi_transmit_test_start , rsi_transmit_test_stop , rsi_wlan_receive_stats_start , rsi_wlan_receive_stats_stop , rsi_wlan_wfd_start_discovery , rsi_wlan_wfd_connect , rsi_wlan_send_data , rsi_wlan_ping_async , rsi_wlan_add_profile , rsi_wlan_get_profile , rsi_wlan_delete_profile , rsi_wlan_enable_auto_config , rsi_wlan_pmk_generate , rsi_wlan_set_sleep_timer , rsi_socket_config , rsi_wlan_update_gain_table , and rsi_wlan_csi_config_async

rsi_post_waiting_common_semaphore#

void rsi_post_waiting_common_semaphore (void )

releases all the common semaphores which are on semaphore wait

Parameters

[in]

Returns

void

Definition at line 1476 of file driver/rsi_common.c

rsi_post_waiting_bt_semaphore#

void rsi_post_waiting_bt_semaphore (void )

Releases the all bt ,prop_protocol ,ble semaphores.

Parameters

[in]

Returns

void

Definition at line 1511 of file driver/rsi_common.c

rsi_release_waiting_semaphore#

int32_t rsi_release_waiting_semaphore (void )

Releases all common ,wlan and nwk semaphores which are on waiting.

Parameters

[in]

Returns

0 - Success

Definition at line 1570 of file driver/rsi_common.c

rsi_check_pkt_queue_and_dequeue#

void rsi_check_pkt_queue_and_dequeue (void )

Check the packet queues and dequeues the packet.

Parameters

[in]

Returns

void

Definition at line 1609 of file driver/rsi_common.c

rsi_free_queue_pkt#

void rsi_free_queue_pkt (uint8_t pkt_dequeued, rsi_pkt_t * pkt)

free the queued packet.

Parameters

[in]	pkt_dequeued	- pkt to be free
[in]	pkt	- pointer of the packet to be free

Returns

void

Definition at line 1683 of file driver/rsi_common.c

rsi_error_timeout_and_clear_events#

void rsi_error_timeout_and_clear_events (int32_t error, uint32_t cmd_type)

Clear the event and gives timeout error.

Parameters

[in]	error	- Error
[in]	cmd_type	- command type

Returns

void

Definition at line 1721 of file driver/rsi_common.c

Referenced by rsi_tx_event_handler , and rsi_rx_event_handler

rsi_check_waiting_cmds#

void rsi_check_waiting_cmds (rsi_rsp_waiting_cmds_t * reponse)

Check the commands which are waiting for the response and sets the flag.

Parameters

[in]

reponse

- Buffer

Returns

void

Definition at line 1757 of file driver/rsi_common.c

References rsi_driver_cb_non_rom::common_wait_bitmap , rsi_rsp_waiting_cmds_s::waiting_cmds , rsi_driver_cb_non_rom::wlan_wait_bitmap , rsi_driver_cb_non_rom::nwk_wait_bitmap , rsi_driver_cb_non_rom::send_wait_bitmap , rsi_driver_cb_non_rom::bt_wait_bitmap , rsi_rsp_waiting_cmds_s::rx_driver_flag , rsi_driver_cb_non_rom::rx_driver_flag , and RSI_SUCCESS

rsi_secure_ping_pong_wr#

int16_t rsi_secure_ping_pong_wr (uint32_t ping_pong, uint8_t * src_addr, uint16_t size_param)

Write the given data to the specified register address in the Module. This API writes the given data in ping or pong buffer.

Parameters

[in]	ping_pong	- ping or pong buffer write
[in]	src_addr	- Number of bytes to read. (def: 2 since we have 16 bit regs)
[in]	size_param	- pointer contain the buffer of content to be written

Returns

0 - Success Non-Zero Value - Failure

Definition at line 53 of file driver/rsi_device_init.c

rsi_bl_waitfor_boardready#

int16_t rsi_bl_waitfor_boardready (void )

This API checks for the readiness of the bootloader to receive the commands from the host.

Parameters

[in]

Returns

0 - Success Negative Value - Failure -3 - Board ready not received -4 - Bootup options last configuration not saved -5 - Bootup options checksum failed -6 - Bootloader version mismatch

Definition at line 161 of file driver/rsi_device_init.c

rsi_bl_select_option#

int16_t rsi_bl_select_option (uint8_t cmd)

Send firmware load request to module or update default configurations.

Parameters

[in]

cmd

- type of configuration to be saved BURN_NWP_FW - 0x42 LOAD_NWP_FW - 0x31 LOAD_DEFAULT_NWP_FW_ACTIVE_LOW - 0x71

Returns

0 - Success Non-Zero Value - Failure -28 - Firmware Load or Upgrade timeout error -14 - Valid Firmware not present -15 - Invalid Option

Definition at line 212 of file driver/rsi_device_init.c

rsi_set_fast_fw_up#

int32_t rsi_set_fast_fw_up (void )

Fast setting of fw_up.

Parameters

[in]

Returns

0 - Success Non-Zero Value - Failure

Definition at line 424 of file driver/rsi_device_init.c

rsi_bootloader_instructions#

int16_t rsi_bootloader_instructions (uint8_t type, uint16_t * data)

Send boot instructions to module.

Parameters

[in]	type	- type of the insruction to perform 0xD1 - RSI_REG_READ 0xD2 - RSI_REG_WRITE 0xD5 - RSI_PING_WRITE 0xD4 - RSI_PONG_WRITE 0x42 - BURN_NWP_FW 0x31 - LOAD_NWP_FW 0x71 - LOAD_DEFAULT_NWP_FW_ACTIVE_LOW
[in]	data	- pointer to data which is to be read/write

Returns

0 - Success Non-Zero Value - Failure -28 - Firmware Load or Upgrade timeout error -2 - Invalid Parameter -1 or -2 - SPI Failure

Note

This is a proprietry API and it is not recommended to be used by the user directly.

Definition at line 523 of file driver/rsi_device_init.c

rsi_interrupt_handler#

void rsi_interrupt_handler (void )

Handle the interrupt coming from the module.

Parameters

[in]

Returns

void

Definition at line 34 of file driver/rsi_driver.c

rsi_mask_ta_interrupt#

void rsi_mask_ta_interrupt (void )

Mask the TA interrupt.

Parameters

[in]

Returns

void

Definition at line 57 of file driver/rsi_driver.c

rsi_unmask_ta_interrupt#

void rsi_unmask_ta_interrupt (void )

Unmask the TA interrupt.

Parameters

[in]

Returns

void

Definition at line 74 of file driver/rsi_driver.c

rsi_rx_event_handler#

void rsi_rx_event_handler (void )

Read the packet from module and process RX packet.

Parameters

[in]

Returns

void

Definition at line 587 of file driver/rsi_driver_event_handlers.c

References rsi_driver_cb_s::common_cb , rsi_driver_cb_non_rom::driver_rx_timer_start , rsi_init_timer , rsi_driver_cb_non_rom::rx_timer_start , rsi_timer_expired , rsi_error_timeout_and_clear_events , rsi_get_intr_status , rsi_clear_event , rsi_set_event , rsi_driver_cb_non_rom::tx_mask_event , rsi_unmask_event , rsi_mutex_lock , rsi_driver_cb_non_rom::tx_mutex , rsi_mutex_unlock , rsi_common_cb_s::power_save , rsi_power_save_s::power_save_enable , rsi_wait4wakeup , rsi_req_wakeup , rsi_ulp_wakeup_init , rsi_device_interrupt_status , rsi_mem_rd , RSI_SUCCESS , rsi_wlan_cb_non_rom_s::callback_list , rsi_callback_cb_s::rsi_assertion_cb , rsi_mem_wr , and rsi_allow_sleep

rsi_set_event#

void rsi_set_event (uint32_t event_num)

Set an event.

Parameters

[in]

event_num

- Event number to be set

Returns

void

Definition at line 137 of file driver/rsi_events.c

Referenced by rsi_rx_event_handler , and rsi_send_large_data_async

rsi_clear_event#

void rsi_clear_event (uint32_t event_num)

Clear an event.

Parameters

[in]

event_num

- Event number to clear

Returns

void

Definition at line 155 of file driver/rsi_events.c

rsi_mask_event#

void rsi_mask_event (uint32_t event_num)

Mask an event specified using the event number.

Parameters

[in]

event_num

- Event number to mask

Returns

void

Definition at line 172 of file driver/rsi_events.c

rsi_find_event#

uint32_t rsi_find_event (uint32_t event_map)

Find the event which is set from the event map.

Parameters

[in]

event_map

- Event map

Returns

0 - Success Non-Zero Value - Failure

Definition at line 236 of file driver/rsi_events.c

rsi_register_event#

uint16_t rsi_register_event (uint32_t event_id, void(*)(void) event_handler_ptr)

Parameters

[in]	event_id	- event number which needs to be registered
[in]	event_handler_ptr	- event handler which needs to be registered for a given event

Returns

0 - Success 1 - Error

Definition at line 256 of file driver/rsi_events.c

rsi_set_event_from_isr#

void rsi_set_event_from_isr (uint32_t event_num)

Set the event from isr context.

Parameters

[in]

event_num

- Event number to mask

Returns

void

Definition at line 274 of file driver/rsi_events.c

rsi_events_init#

void rsi_events_init (void )

Initialize the events.

Parameters

[in]

Returns

void

Definition at line 293 of file driver/rsi_events.c

ROM_WL_rsi_set_event#

void ROM_WL_rsi_set_event (global_cb_t * global_cb_p, uint32_t event_num)

Set an event.

Parameters

[in]	global_cb_p	- pointer to the common buffer
[in]	event_num	- event number to be set

Returns

void

Definition at line 41 of file driver/rsi_events_rom.c

ROM_WL_rsi_clear_event#

void ROM_WL_rsi_clear_event (global_cb_t * global_cb_p, uint32_t event_num)

Clear an event.

Parameters

[in]	global_cb_p	- pointer to the common buffer
[in]	event_num	- event number to clear

Returns

void

Definition at line 81 of file driver/rsi_events_rom.c

ROM_WL_rsi_mask_event#

void ROM_WL_rsi_mask_event (global_cb_t * global_cb_p, uint32_t event_num)

Mask an event.

Parameters

[in]	global_cb_p	- pointer to the common buffer
[in]	event_num	- event number to mask

Returns

void

Definition at line 107 of file driver/rsi_events_rom.c

ROM_WL_rsi_unmask_event#

void ROM_WL_rsi_unmask_event (global_cb_t * global_cb_p, uint32_t event_num)

Unmask an event.

Parameters

[in]	global_cb_p	- pointer to the common buffer
[in]	event_num	- event number to unmask

Returns

void

Definition at line 132 of file driver/rsi_events_rom.c

ROM_WL_rsi_find_event#

uint32_t ROM_WL_rsi_find_event (global_cb_t * global_cb_p, uint32_t event_map)

Find the event which is set from the map.

Parameters

[in]	global_cb_p	- pointer to the common buffer
[in]	event_map	- event map

Returns

Event number

Definition at line 162 of file driver/rsi_events_rom.c

ROM_WL_rsi_register_event#

uint16_t ROM_WL_rsi_register_event (global_cb_t * global_cb_p, uint32_t event_id, void(*)(void) event_handler_ptr)

Parameters

[in]	global_cb_p	- pointer to the common buffer
[in]	event_id	- event number which needs to be registered
[in]	event_handler_ptr	- event handler which needs to be registered for a given event

Returns

0 - Success 1 - Error

Definition at line 185 of file driver/rsi_events_rom.c

ROM_WL_rsi_set_event_from_isr#

void ROM_WL_rsi_set_event_from_isr (global_cb_t * global_cb_p, uint32_t event_num)

Set an event from ISR.

Parameters

[in]	global_cb_p	- pointer to the common buffer
[in]	event_num	- event number to be set

Returns

void

Definition at line 212 of file driver/rsi_events_rom.c

ROM_WL_rsi_unmask_event_from_isr#

void ROM_WL_rsi_unmask_event_from_isr (global_cb_t * global_cb_p, uint32_t event_num)

Unmask an event from ISR.

Parameters

[in]	global_cb_p	- pointer to the common buffer
[in]	event_num	- event number to unmask

Returns

void

Definition at line 237 of file driver/rsi_events_rom.c

rsi_pkt_pool_init#

int32_t rsi_pkt_pool_init (rsi_pkt_pool_t * pool_cb, uint8_t * buffer, uint32_t total_size, uint32_t pkt_size)

Initialize/create packet pool from the provided buffer.

Parameters

[in]	pool_cb	- packet pool pointer which needs to be initialized
[in]	buffer	- buffer pointer to create pool
[in]	total_size	- size of pool to create
[in]	pkt_size	- size of each packet in pool

Returns

0 - Success Negative Value - Failure

Definition at line 38 of file driver/rsi_pkt_mgmt.c

rsi_pkt_alloc#

rsi_pkt_t * rsi_pkt_alloc (rsi_pkt_pool_t * pool_cb)

Allocate packet from a given packet pool.

Parameters

[in]

pool_cb

- packet pool pointer from which packet needs to be allocated

Returns

0 - Success Positive Value - Failure

Definition at line 57 of file driver/rsi_pkt_mgmt.c

rsi_pkt_free#

int32_t rsi_pkt_free (rsi_pkt_pool_t * pool_cb, rsi_pkt_t * pkt)

Free the packet.

Parameters

[in]	pool_cb	- packet pool to which packet needs to be freed
[in]	pkt	- packet pointer which needs to be freed

Returns

0 - Success Non-Zero Value - Failure

Definition at line 77 of file driver/rsi_pkt_mgmt.c

rsi_is_pkt_available#

uint32_t rsi_is_pkt_available (rsi_pkt_pool_t * pool_cb)

Return number of available packets in pool.

Parameters

[in]

pool_cb

- pool pointer to check available packet count

Returns

>=0 - Number of packets in pool

Definition at line 95 of file driver/rsi_pkt_mgmt.c

ROM_WL_rsi_pkt_pool_init#

int32_t ROM_WL_rsi_pkt_pool_init (global_cb_t * global_cb_p, rsi_pkt_pool_t * pool_cb, uint8_t * buffer, uint32_t total_size, uint32_t pkt_size)

Initialize/create packet pool from the provided buffer.

Parameters

[in]	global_cb_p	- pointer to the global control block
[in]	pool_cb	- packet pool pointer which needs to be initialized
[in]	buffer	- buffer pointer to create pool
[in]	total_size	- size of pool to create
[in]	pkt_size	- size of each packet in pool

Returns

0 - Success Negative value - Failure

Definition at line 41 of file driver/rsi_pkt_mgmt_rom.c

ROM_WL_rsi_pkt_alloc_non_blocking#

rsi_pkt_t * ROM_WL_rsi_pkt_alloc_non_blocking (global_cb_t * global_cb_p, rsi_pkt_pool_t * pool_cb)

Allocate packet from a given packet pool.

Parameters

[in]	global_cb_p	- pointer to the global control block
[in]	pool_cb	- packet pool pointer from which packet needs to be allocated

Returns

Allocated packet pointer if Success NULL - If allocation fails

Definition at line 116 of file driver/rsi_pkt_mgmt_rom.c

ROM_WL_rsi_pkt_free_non_blocking#

int32_t ROM_WL_rsi_pkt_free_non_blocking (global_cb_t * global_cb_p, rsi_pkt_pool_t * pool_cb, rsi_pkt_t * pkt)

Free the packet.

Parameters

[in]	global_cb_p	- pointer to the global control block
[in]	pool_cb	- packet pool pointer from which packet needs to be allocated
[in]	pkt	- packet pointer which needs to be freed

Returns

0 - Success Negative Value - Failure

Definition at line 167 of file driver/rsi_pkt_mgmt_rom.c

ROM_WL_rsi_pkt_alloc#

rsi_pkt_t * ROM_WL_rsi_pkt_alloc (global_cb_t * global_cb_p, rsi_pkt_pool_t * pool_cb)

Allocate packet from a given packet pool.

Parameters

[in]	global_cb_p	- pointer to the global control block
[in]	pool_cb	- packet pool pointer from which packet needs to be allocated

Returns

Allocated packet pointer if Success NULL - If allocation fails

Definition at line 210 of file driver/rsi_pkt_mgmt_rom.c

ROM_WL_rsi_pkt_free#

int32_t ROM_WL_rsi_pkt_free (global_cb_t * global_cb_p, rsi_pkt_pool_t * pool_cb, rsi_pkt_t * pkt)

Free the packet.

Parameters

[in]	global_cb_p	- pointer to the global control block
[in]	pool_cb	- packet pool to which packet needs to be freed
[in]	pkt	- packet pointer which needs to be freed

Returns

0 - Success Negative Value - Failure

Definition at line 260 of file driver/rsi_pkt_mgmt_rom.c

ROM_WL_rsi_is_pkt_available#

uint32_t ROM_WL_rsi_is_pkt_available (global_cb_t * global_cb_p, rsi_pkt_pool_t * pool_cb)

Return number of avaiable packets in pool.

Parameters

[in]	global_cb_p	- pointer to the global control block
[in]	pool_cb	- pool pointer to check available pakcets count

Returns

Number of packet in pool

Definition at line 301 of file driver/rsi_pkt_mgmt_rom.c