Callbacks Declarations#
Typedefs#
The callback function will be called if advertise report event is received.
The callback function will be called if BLE connection status is received.
The callback function will be called if BLE connection status is received.
The callback function will be called if disconnect event is received.
The callback function will be called if le ping payload timeout expired event is received.
The callback function will be called if le ltk request event is received.
The callback function will be called if le security keys event is received.
The callback function will be called if smp request is received in Master mode.
The callback function will be called if smp request is received in slave mode.
The callback function will be called if smp passkey event is received from module.
The callback function will be called if smp passkey event is received from module.
The callback function will be called if smp failed event is received from module.
The callback function will be called if security method event is received from module.
The callback function will be called if encrypted event is received from module.
The callback function will be called if BLE Secure connection passkey event received from module.
The callback function will be called when phy update complete event is received.
The callback function will be called when conn update complete event is received.
The callback function will be called if remote conn params request is received.
Callback function to peer device supported features.
Callback function to le more data request.
This event is raised when data length is update in controller.
The callback function will be called if directed advertise report event is received.
The callback function will be called if gatt error event is received.
The callback function will be called if attribute descriptors event is received.
The callback function will be called if profiles list event is received.
The callback function will be called if profile event is received.
The callback function will be called if characteristic services list event is received.
The callback function will be called if include services list event is received.
The callback function will be called if attribute value event is received.
The callback function will be called if attribute value event is received.
The callback function will be called if gatt write event is received.
The callback function will be called if indication confirmation event is received.
The callback function will be called if GATT prepare event is received.
The callback function will be called if profiles list response is received.
The callback function will be called if profile response is received.
The callback function will be called if service characteristics response is received.
The callback function will be called if include services response is received.
The callback function will be called if attribute descriptors response is received.
The callback function will be called upon receiving the attribute value.
The callback function will be called if the attribute set/prepare/execute action is completed.
The callback function will be called if the GATT write/notify/indicate events are received.
The callback function will be called if the GATT prepare events are received.
The callback function will be called if the GATT execute events are received.
The callback function will be called if the GATT read request events are received.
The callback function will be called if MTU size request is received.
Callback function to indicate MTU size and who initated MTU Exchange Request.
Callback function to get peer device information.
Typedef Documentation#
rsi_ble_on_adv_report_event_t#
void(* rsi_ble_on_adv_report_event_t)(rsi_ble_event_adv_report_t *rsi_ble_event_adv) )(rsi_ble_event_adv_report_t *rsi_ble_event_adv)
The callback function will be called if advertise report event is received.
| [out] | rsi_ble_event_adv | contains the advertise report information. Please refer rsi_ble_event_adv_report_s for more info. |
Returns
void
description#
This callback function will be called if the advertise event report is received from the module This callback has to be registered using rsi_ble_gap_register_callbacks API
1816 of file include/rsi_ble_apis.hrsi_ble_on_connect_t#
void(* rsi_ble_on_connect_t)(rsi_ble_event_conn_status_t *rsi_ble_event_conn) )(rsi_ble_event_conn_status_t *rsi_ble_event_conn)
The callback function will be called if BLE connection status is received.
| [out] | rsi_ble_event_conn | contains the BLE connection status. Please refer rsi_ble_event_conn_status_s for more info. |
Returns
void
description#
This callback function will be called if the BLE connection status is received from the module. For BLE 4.1 and lower version this callback will be called This callback has to be registered using rsi_ble_gap_register_callbacks API
1827 of file include/rsi_ble_apis.hrsi_ble_on_enhance_connect_t#
void(* rsi_ble_on_enhance_connect_t)(rsi_ble_event_enhance_conn_status_t *rsi_ble_event_enhance_conn) )(rsi_ble_event_enhance_conn_status_t *rsi_ble_event_enhance_conn)
The callback function will be called if BLE connection status is received.
| [out] | rsi_ble_event_conn | contains the BLE connection status. Please refer rsi_ble_event_enhance_conn_status_s for more info. |
Returns
void
description#
This callback function will be called if the BLE connection status is received from the module. For BLE 4.2 and above version this callback will be called This callback has to be registered using rsi_ble_gap_register_callbacks API
1838 of file include/rsi_ble_apis.hrsi_ble_on_disconnect_t#
void(* rsi_ble_on_disconnect_t)(rsi_ble_event_disconnect_t *rsi_ble_event_disconnect, uint16_t reason) )(rsi_ble_event_disconnect_t *rsi_ble_event_disconnect, uint16_t reason)
The callback function will be called if disconnect event is received.
| [out] | rsi_ble_event_disconnect | contains the disconnect status. Please refer rsi_ble_event_disconnect_s for more info. |
| [out] | reason | contains reason for failure. |
Note
Few reason for failure are given below 0x4E13 Remote user terminated connection 0x4E14 Remote device terminated connection due to low resources 0x4E15 Remote device terminated connection due to power off 0x4E3D Connection terminated due to MIC failure 0x4E3E Connection Failed to be Established 0x4E60 Invalid Handle Range
Returns
void
description#
This callback function will be called if the disconnect status event is received from the module This callback has to be registered using rsi_ble_gap_register_callbacks API
1857 of file include/rsi_ble_apis.hrsi_ble_on_le_ping_payload_timeout_t#
void(* rsi_ble_on_le_ping_payload_timeout_t)(rsi_ble_event_le_ping_time_expired_t *rsi_ble_event_timeout_expired) )(rsi_ble_event_le_ping_time_expired_t *rsi_ble_event_timeout_expired)
The callback function will be called if le ping payload timeout expired event is received.
| [out] | rsi_ble_event_disconnect | contains the disconnect status. Please refer rsi_ble_event_le_ping_time_expired_s for more info. |
Returns
void
description#
This callback function will be called if the le ping time expired event is received from the module This callback has to be registered using rsi_ble_gap_register_callbacks API
1868 of file include/rsi_ble_apis.hrsi_ble_on_le_ltk_req_event_t#
void(* rsi_ble_on_le_ltk_req_event_t)(rsi_bt_event_le_ltk_request_t *rsi_ble_event_le_ltk_request) )(rsi_bt_event_le_ltk_request_t *rsi_ble_event_le_ltk_request)
The callback function will be called if le ltk request event is received.
| [out] | rsi_ble_event_le_ltk_request | contains the ltk request info. Please refer rsi_bt_event_le_ltk_request_s for more info |
Returns
void
description#
This callback function will be called if le ltk request event is received from the module This callback has to be registered using rsi_ble_smp_register_callbacks API
1880 of file include/rsi_ble_apis.hrsi_ble_on_le_security_keys_t#
void(* rsi_ble_on_le_security_keys_t)(rsi_bt_event_le_security_keys_t *rsi_ble_event_le_security_keys) )(rsi_bt_event_le_security_keys_t *rsi_ble_event_le_security_keys)
The callback function will be called if le security keys event is received.
| [out] | rsi_bt_event_le_security_keys_t | contains security keys. Please refer rsi_bt_event_le_security_keys_s for more info |
Note
When the device is disconnected from the remote device, the pairing information such as LTK, EDIV, and RAND will be erased. Therefore, it is essential for the application developer to store and manage this information in the Host NVM.
Returns
void
description#
This callback function will be called if le security keys event is received from the module This callback has to be registered using rsi_ble_smp_register_callbacks API
1892 of file include/rsi_ble_apis.hrsi_ble_on_smp_request_t#
void(* rsi_ble_on_smp_request_t)(rsi_bt_event_smp_req_t *remote_dev_address) )(rsi_bt_event_smp_req_t *remote_dev_address)
The callback function will be called if smp request is received in Master mode.
| [out] | resp_status | contains the response status (Success or Error code) |
| [out] | remote_dev_address | contains the smp requested device address. Please refer rsi_bt_event_smp_req_s for more info. |
Returns
void
description#
This callback function will be called if the smp request is received from the remote device This callback has to be registered using rsi_ble_smp_register_callbacks API
1910 of file include/rsi_ble_apis.hrsi_ble_on_smp_response_t#
void(* rsi_ble_on_smp_response_t)(rsi_bt_event_smp_resp_t *remote_dev_address) )(rsi_bt_event_smp_resp_t *remote_dev_address)
The callback function will be called if smp request is received in slave mode.
| [out] | remote_dev_address | contains the smp resp information. please refer rsi_bt_event_smp_resp_s for more info |
Returns
void
description#
This callback function will be called if the smp request is received from the remote device This callback has to be registered using rsi_ble_smp_register_callbacks API
1922 of file include/rsi_ble_apis.hrsi_ble_on_smp_passkey_t#
void(* rsi_ble_on_smp_passkey_t)(rsi_bt_event_smp_passkey_t *remote_dev_address) )(rsi_bt_event_smp_passkey_t *remote_dev_address)
The callback function will be called if smp passkey event is received from module.
| [out] | resp_statuscontains | the response status (Success or Error code) |
| [out] | remote_dev_address | contains the remote device address. please refer rsi_bt_event_smp_passkey_s for more info |
Returns
void
description#
This callback function will be called if the smp passkey is received from the module This callback has to be registered using rsi_ble_smp_register_callbacks API
1935 of file include/rsi_ble_apis.hrsi_ble_on_smp_passkey_display_t#
void(* rsi_ble_on_smp_passkey_display_t)(rsi_bt_event_smp_passkey_display_t *smp_passkey_display) )(rsi_bt_event_smp_passkey_display_t *smp_passkey_display)
The callback function will be called if smp passkey event is received from module.
| [out] | resp_status | contains the response status (Success or Error code) |
| [out] | smp_passkey_display | contains the smp passkey display information. Please refer rsi_bt_event_smp_passkey_display_s for more info. |
Returns
void
description#
This callback function will be called if the smp passkey display is received from the module This callback has to be registered using rsi_ble_smp_register_callbacks API
1948 of file include/rsi_ble_apis.hrsi_ble_on_smp_failed_t#
void(* rsi_ble_on_smp_failed_t)(uint16_t resp_status, rsi_bt_event_smp_failed_t *remote_dev_address) )(uint16_t resp_status, rsi_bt_event_smp_failed_t *remote_dev_address)
The callback function will be called if smp failed event is received from module.
| [out] | resp_status | contains the remote device address. Please refer rsi_bt_event_smp_failed_s for more info. |
Note
Error codes for SMP FAILED are given below 0x4B01 SMP Passkey entry failed 0x4B02 SMP OOB not available 0x4B03 SMP Authentication Requirements 0x4B04 SMP confirm value failed 0x4B05 SMP Pairing not supported 0x4B06 SMP Encryption key size insufficient 0x4B07 SMP command not supported 0x4B08 SMP Unspecified Reason 0x4B09 SMP repeated attempts 0x4B0C SMP Numeric Comparison Failed 0x4B0B DHKEY Check Failed
Returns
void
description#
This callback function will be called if the smp process is failed with remote device This callback has to be registered using rsi_ble_smp_register_callbacks API
1973 of file include/rsi_ble_apis.hrsi_ble_on_sc_method_t#
void(* rsi_ble_on_sc_method_t)(rsi_bt_event_sc_method_t *scmethod) )(rsi_bt_event_sc_method_t *scmethod)
The callback function will be called if security method event is received from module.
| [out] | scmethod | contains Security Method 1 means Just works or 2 means Passkey. Please refer rsi_bt_event_sc_method_s for more info. |
Returns
void
description#
This callback function will be called if the SC method is done with remote device This callback has to be registered using rsi_ble_smp_register_callbacks API
1985 of file include/rsi_ble_apis.hrsi_ble_on_encrypt_started_t#
void(* rsi_ble_on_encrypt_started_t)(uint16_t resp_status, rsi_bt_event_encryption_enabled_t *enc_enabled) )(uint16_t resp_status, rsi_bt_event_encryption_enabled_t *enc_enabled)
The callback function will be called if encrypted event is received from module.
| [out] | resp_status | contains the response status (Success or Error code) |
| [out] | enc_enabled | contains encryption information. Please refer rsi_bt_event_encryption_enabled_s for more info. |
Note
When the device is disconnected from the remote device, the pairing information such as LTK, EDIV, and RAND will be erased. Therefore, it is essential for the application developer to store and manage this information in the Host NVM.
Returns
void
description#
This callback function will be called if the encryption process is started with remote device This callback has to be registered using rsi_ble_smp_register_callbacks API
1999 of file include/rsi_ble_apis.hrsi_ble_on_sc_passkey_t#
void(* rsi_ble_on_sc_passkey_t)(rsi_bt_event_sc_passkey_t *sc_passkey) )(rsi_bt_event_sc_passkey_t *sc_passkey)
The callback function will be called if BLE Secure connection passkey event received from module.
| [out] | sc_passkey | contains LE SC Passkey information. Please refer rsi_bt_event_encryption_enabled_s for more info. |
Returns
void
description#
This callback function will be called if the BLE Secure connection passkey event received This callback has to be registered using rsi_ble_smp_register_callbacks API
2011 of file include/rsi_ble_apis.hrsi_ble_on_phy_update_complete_t#
void(* rsi_ble_on_phy_update_complete_t)(rsi_ble_event_phy_update_t *rsi_ble_event_phy_update_complete) )(rsi_ble_event_phy_update_t *rsi_ble_event_phy_update_complete)
The callback function will be called when phy update complete event is received.
| [out] | rsi_ble_event_phy_update_complete | contains the controller support phy information. Please refer rsi_ble_event_phy_update_s for more info. |
Returns
void
description#
This callback function will be called when phy update complete event is received This callback has to be registered using rsi_ble_gap_register_callbacks API
2022 of file include/rsi_ble_apis.hrsi_ble_on_conn_update_complete_t#
void(* rsi_ble_on_conn_update_complete_t)(rsi_ble_event_conn_update_t *rsi_ble_event_conn_update_complete, uint16_t resp_status) )(rsi_ble_event_conn_update_t *rsi_ble_event_conn_update_complete, uint16_t resp_status)
The callback function will be called when conn update complete event is received.
| [out] | rsi_ble_event_conn_update_complete | contains the controller support conn information. Please refer rsi_ble_event_conn_update_s for more info. |
| [out] | resp_status | contains the response status (Success or Error code) |
Returns
void
description#
This callback function will be called when conn update complete event is received This callback has to be registered using rsi_ble_gap_register_callbacks API
2035 of file include/rsi_ble_apis.hrsi_ble_on_remote_conn_params_request_t#
void(* rsi_ble_on_remote_conn_params_request_t)(rsi_ble_event_remote_conn_param_req_t *rsi_ble_event_remote_conn_param, uint16_t resp_status) )(rsi_ble_event_remote_conn_param_req_t *rsi_ble_event_remote_conn_param, uint16_t resp_status)
The callback function will be called if remote conn params request is received.
| [out] | resp_status | contains the response status (Success or Error code) |
| [out] | rsi_ble_event_remote_features | contains the remote device supported features. Please refer rsi_ble_event_remote_features_s for more info. |
Returns
void
description#
This callback function will be called when remote conn params request is received This callback has to be registered using rsi_ble_gap_register_callbacks API
2049 of file include/rsi_ble_apis.hrsi_ble_on_remote_features_t#
void(* rsi_ble_on_remote_features_t)(rsi_ble_event_remote_features_t *rsi_ble_event_remote_features) )(rsi_ble_event_remote_features_t *rsi_ble_event_remote_features)
Callback function to peer device supported features.
| [out] | rsi_ble_event_remote_features | contains the remote device supported features. Please refer rsi_ble_event_remote_features_s for more info. |
Returns
void
description#
This callback function will be called when conn update complete event is received This callback has to be registered using rsi_ble_gap_extended_register_callbacks API
2062 of file include/rsi_ble_apis.hrsi_ble_on_le_more_data_req_t#
void(* rsi_ble_on_le_more_data_req_t)(rsi_ble_event_le_dev_buf_ind_t *rsi_ble_more_data_evt) )(rsi_ble_event_le_dev_buf_ind_t *rsi_ble_more_data_evt)
Callback function to le more data request.
| [out] | rsi_ble_more_data_evt | contains the LE Device Buffer Indication information. Please refer rsi_ble_event_le_dev_buf_ind_s for more info. |
Returns
void
description#
This callback function will be called when le more data event is received This callback has to be registered using rsi_ble_gap_extended_register_callbacks API
2073 of file include/rsi_ble_apis.hrsi_ble_on_data_length_update_t#
void(* rsi_ble_on_data_length_update_t)(rsi_ble_event_data_length_update_t *remote_dev_address) )(rsi_ble_event_data_length_update_t *remote_dev_address)
This event is raised when data length is update in controller.
| [out] | remote_dev_address | contains the controller support tx and rx length information. Please refer rsi_ble_event_data_length_update_s for more info. |
Returns
void
description#
This callback function will be called when data length update complete event is received This callback has to be registered using rsi_ble_gap_register_callbacks API
2085 of file include/rsi_ble_apis.hrsi_ble_on_directed_adv_report_event_t#
void(* rsi_ble_on_directed_adv_report_event_t)(rsi_ble_event_directedadv_report_t *rsi_ble_event_directed) )(rsi_ble_event_directedadv_report_t *rsi_ble_event_directed)
The callback function will be called if directed advertise report event is received.
| [in] | rsi_ble_event_directedcontains | the advertise report information |
Returns
void
description#
This callback function will be called if the advertise event report is received from the module This callback has to be registered using rsi_ble_gap_register_callbacks API
2096 of file include/rsi_ble_apis.hrsi_ble_on_gatt_error_resp_t#
void(* rsi_ble_on_gatt_error_resp_t)(uint16_t event_status, rsi_ble_event_error_resp_t *rsi_ble_gatt_error) )(uint16_t event_status, rsi_ble_event_error_resp_t *rsi_ble_gatt_error)
The callback function will be called if gatt error event is received.
| [out] | event_status | contains the gatt error information. Please refer rsi_ble_event_error_resp_s for more info |
Note
Attribute protocol error codes 0x4A01 - Invalid Handle 0x4A06 - Request not supported 0x4A0A - Attribute not found 0x4A05 - Insufficient authentication 0x4A08 - Insufficient authorization 0x4A0C - Insufficient encryption key size 0x4A0F - Insufficient encryption 0x4A02 - Read not permitted 0x4A03 - Write not permitted 0x4A07 - Invalid offset 0x4A0B - Attribute not Long
Returns
void
description#
This callback function will be called if the gatt error event is received from the module This callback has to be registered using rsi_ble_gatt_register_callbacks API
2165 of file include/rsi_ble_apis.hrsi_ble_on_gatt_desc_val_event_t#
void(* rsi_ble_on_gatt_desc_val_event_t)(uint16_t event_status, rsi_ble_event_gatt_desc_t *rsi_ble_gatt_desc_val) )(uint16_t event_status, rsi_ble_event_gatt_desc_t *rsi_ble_gatt_desc_val)
The callback function will be called if attribute descriptors event is received.
| [out] | event_status | contains the response status 0 - Success Non-Zero Value - Failure |
| [out] | rsi_ble_gatt_desc_val | contains the profiles list event information. Please refer rsi_ble_event_gatt_desc_s for more info |
Returns
void
description#
This callback function will be called if the attribute descriptors event is received from the module This callback has to be registered using rsi_ble_gatt_register_callbacks API
2179 of file include/rsi_ble_apis.hrsi_ble_on_event_profiles_list_t#
void(* rsi_ble_on_event_profiles_list_t)(uint16_t event_status, rsi_ble_event_profiles_list_t *rsi_ble_event_profiles) )(uint16_t event_status, rsi_ble_event_profiles_list_t *rsi_ble_event_profiles)
The callback function will be called if profiles list event is received.
| [out] | event_status | contains the response status 0 - Success Non-Zero Value - Failure |
| [out] | rsi_ble_event_profiles | contains the profiles list event information. Please refer rsi_ble_event_profiles_list_s for more info |
Returns
void
description#
This callback function will be called if the profiles list response is received from the module This callback has to be registered using rsi_ble_gatt_register_callbacks API
2195 of file include/rsi_ble_apis.hrsi_ble_on_event_profile_by_uuid_t#
void(* rsi_ble_on_event_profile_by_uuid_t)(uint16_t event_status, rsi_ble_event_profile_by_uuid_t *rsi_ble_event_profile) )(uint16_t event_status, rsi_ble_event_profile_by_uuid_t *rsi_ble_event_profile)
The callback function will be called if profile event is received.
| [out] | event_status | contains the response status 0 - Success Non-Zero Value - Failure |
| [out] | rsi_ble_event_profile | contains the profile response information. Please refer rsi_ble_event_profile_by_uuid_s for more info. |
Returns
void
description#
This callback function will be called if the profile response is received from the module This callback has to be registered using rsi_ble_gatt_register_callbacks API
2211 of file include/rsi_ble_apis.hrsi_ble_on_event_read_by_char_services_t#
void(* rsi_ble_on_event_read_by_char_services_t)(uint16_t event_status, rsi_ble_event_read_by_type1_t *rsi_ble_event_read_type1) )(uint16_t event_status, rsi_ble_event_read_by_type1_t *rsi_ble_event_read_type1)
The callback function will be called if characteristic services list event is received.
| [out] | event_status | contains the response status 0 - Success Non-Zero Value - Failure |
| [out] | rsi_ble_event_read_type1 | contains the char services event information. Please refer rsi_ble_event_read_by_type1_s for more info. |
Returns
void
description#
This callback function will be called if the characteristic services list response is received from the module This callback has to be registered using rsi_ble_gatt_register_callbacks API
2226 of file include/rsi_ble_apis.hrsi_ble_on_event_read_by_inc_services_t#
void(* rsi_ble_on_event_read_by_inc_services_t)(uint16_t event_status, rsi_ble_event_read_by_type2_t *rsi_ble_event_read_type2) )(uint16_t event_status, rsi_ble_event_read_by_type2_t *rsi_ble_event_read_type2)
The callback function will be called if include services list event is received.
| [out] | event_status | contains the response status 0 - Success Non-Zero Value - Failure |
| [out] | rsi_ble_event_read_type2 | contains the inc services information. Please refer rsi_ble_event_read_by_type2_s for more info. |
Returns
void
description#
This callback function will be called if the include services list response is received from the module This callback has to be registered using rsi_ble_gatt_register_callbacks API
2242 of file include/rsi_ble_apis.hrsi_ble_on_event_read_att_value_t#
void(* rsi_ble_on_event_read_att_value_t)(uint16_t event_status, rsi_ble_event_read_by_type3_t *rsi_ble_event_read_type3) )(uint16_t event_status, rsi_ble_event_read_by_type3_t *rsi_ble_event_read_type3)
The callback function will be called if attribute value event is received.
| [out] | event_status | contains the response status 0 - Success Non-Zero Value - Failure |
| [out] | rsi_ble_event_read_type3 | contains the char services event information. Please refer rsi_ble_event_read_by_type3_s for more info. |
Returns
void
description#
This callback function will be called if the attribute value response is received from the module This callback has to be registered using rsi_ble_gatt_register_callbacks API
2257 of file include/rsi_ble_apis.hrsi_ble_on_event_read_resp_t#
void(* rsi_ble_on_event_read_resp_t)(uint16_t event_status, rsi_ble_event_att_value_t *rsi_ble_event_att_val) )(uint16_t event_status, rsi_ble_event_att_value_t *rsi_ble_event_att_val)
The callback function will be called if attribute value event is received.
| [out] | event_status | contains the response status 0 - Success Non-Zero Value - Failure |
| [out] | rsi_ble_event_att_val | contains the profile response information. Please refer rsi_ble_event_att_value_s for more info. |
Returns
void
description#
This callback function will be called if the attribute value is received from the module This callback has to be registered using rsi_ble_gatt_register_callbacks API
2272 of file include/rsi_ble_apis.hrsi_ble_on_event_write_resp_t#
void(* rsi_ble_on_event_write_resp_t)(uint16_t event_status, rsi_ble_set_att_resp_t *rsi_ble_event_set_att_rsp) )(uint16_t event_status, rsi_ble_set_att_resp_t *rsi_ble_event_set_att_rsp)
The callback function will be called if gatt write event is received.
| [out] | event_status | contains the response status 0 - Success Non-Zero Value - Failure |
| [out] | rsi_ble_event_set_att_rsp | contains the profile response information. Please refer rsi_ble_set_att_resp_t for more info. |
Returns
void
description#
This callback function will be called if the gatt write response is received from the module This callback has to be registered using rsi_ble_gatt_register_callbacks API
2286 of file include/rsi_ble_apis.hrsi_ble_on_event_indicate_confirmation_t#
void(* rsi_ble_on_event_indicate_confirmation_t)(uint16_t event_status, rsi_ble_set_att_resp_t *rsi_ble_event_set_att_rsp) )(uint16_t event_status, rsi_ble_set_att_resp_t *rsi_ble_event_set_att_rsp)
The callback function will be called if indication confirmation event is received.
| [out] | event_status | contains the response status 0 - Success Non-Zero Value - Failure |
| [out] | rsi_ble_event_set_att_rsp | contains the profile response information. Please refer rsi_ble_set_att_resp_s for more info. |
Returns
void
description#
This callback function will be called if the indication confirmation response is received from the module This callback has to be registered using rsi_ble_gatt_register_callbacks API
2300 of file include/rsi_ble_apis.hrsi_ble_on_event_prepare_write_resp_t#
void(* rsi_ble_on_event_prepare_write_resp_t)(uint16_t event_status, rsi_ble_prepare_write_resp_t *rsi_ble_event_prepare_write) )(uint16_t event_status, rsi_ble_prepare_write_resp_t *rsi_ble_event_prepare_write)
The callback function will be called if GATT prepare event is received.
| [out] | event_status | contains the response status 0 - Success Non-Zero Value - Failure |
| [out] | rsi_ble_event_prepare_write | contains the char services event information. Please refer rsi_ble_prepare_write_resp_s for more info. |
Returns
void
description#
This callback function will be called if the GATT prepare response is received from the module This callback has to be registered using rsi_ble_gatt_register_callbacks API
2315 of file include/rsi_ble_apis.hrsi_ble_on_profiles_list_resp_t#
void(* rsi_ble_on_profiles_list_resp_t)(uint16_t resp_status, rsi_ble_resp_profiles_list_t *rsi_ble_resp_profiles) )(uint16_t resp_status, rsi_ble_resp_profiles_list_t *rsi_ble_resp_profiles)
The callback function will be called if profiles list response is received.
| [out] | resp_status | contains the profiles list response information. Please refer rsi_ble_resp_profiles_list_s for more info. |
Note
Attribute protocol error codes 0x4A01 - Invalid Handle 0x4A0A - Attribute not found
Returns
void
description#
This callback function will be called if the profiles list response is received from the module This callback has to be registered using rsi_ble_gatt_register_callbacks API
2334 of file include/rsi_ble_apis.hrsi_ble_on_profile_resp_t#
void(* rsi_ble_on_profile_resp_t)(uint16_t resp_status, profile_descriptors_t *rsi_ble_resp_profile) )(uint16_t resp_status, profile_descriptors_t *rsi_ble_resp_profile)
The callback function will be called if profile response is received.
| [out] | resp_status | contains the profile response information. Please refer profile_descriptors_s for more info |
Note
Attribute protocol error codes 0x4A01 - Invalid Handle 0x4A06 - Request not supported 0x4A0A - Attribute not found
Returns
void
description#
This callback function will be called if the profile response is received from the module This callback has to be registered using rsi_ble_gatt_register_callbacks API
2353 of file include/rsi_ble_apis.hrsi_ble_on_char_services_resp_t#
void(* rsi_ble_on_char_services_resp_t)(uint16_t resp_status, rsi_ble_resp_char_services_t *rsi_ble_resp_char_serv) )(uint16_t resp_status, rsi_ble_resp_char_services_t *rsi_ble_resp_char_serv)
The callback function will be called if service characteristics response is received.
| [out] | resp_status | contains the service characteristics response information. Please refer rsi_ble_resp_char_services_s for more info |
Note
Attribute protocol error codes 0x4A01 - Invalid Handle 0x4A06 - Request not supported 0x4A0A - Attribute not found 0x4A05 - Insufficient authentication 0x4A08 - Insufficient authorization 0x4A0C - Insufficient encryption key size 0x4A0F - Insufficient encryption 0x4A02 - Read not permitted
Returns
void
description#
This callback function will be called if the service characteristics response is received from the module This callback has to be registered using rsi_ble_gatt_register_callbacks API
2377 of file include/rsi_ble_apis.hrsi_ble_on_inc_services_resp_t#
void(* rsi_ble_on_inc_services_resp_t)(uint16_t resp_status, rsi_ble_resp_inc_services_t *rsi_ble_resp_inc_serv) )(uint16_t resp_status, rsi_ble_resp_inc_services_t *rsi_ble_resp_inc_serv)
The callback function will be called if include services response is received.
| [out] | resp_status | contains the include services response information. Please refer rsi_ble_resp_inc_services_s for more info |
Note
Attribute protocol error codes 0x4A01 - Invalid Handle 0x4A06 - Request not supported 0x4A0A - Attribute not found 0x4A05 - Insufficient authentication 0x4A08 - Insufficient authorization 0x4A0C - Insufficient encryption key size 0x4A0F - Insufficient encryption 0x4A02 - Read not permitted
Returns
void
description#
This callback function will be called if the include service response is received from the module This callback has to be registered using rsi_ble_gatt_register_callbacks API
2402 of file include/rsi_ble_apis.hrsi_ble_on_att_desc_resp_t#
void(* rsi_ble_on_att_desc_resp_t)(uint16_t resp_status, rsi_ble_resp_att_descs_t *rsi_ble_resp_att_desc) )(uint16_t resp_status, rsi_ble_resp_att_descs_t *rsi_ble_resp_att_desc)
The callback function will be called if attribute descriptors response is received.
| [out] | resp_status | contains the attribute descriptors response information. Please refer rsi_ble_resp_att_descs_s for more info |
Note
Attribute protocol error codes 0x4A01 - Invalid Handle 0x4A0A - Attribute not found 0x4A05 - Insufficient authentication 0x4A08 - Insufficient authorization 0x4A0C - Insufficient encryption key size 0x4A0F - Insufficient encryption 0x4A02 - Read not permitted
Returns
void
description#
This callback function will be called if the attribute descriptors response is received from the module This callback has to be registered using rsi_ble_gatt_register_callbacks API
2425 of file include/rsi_ble_apis.hrsi_ble_on_read_resp_t#
void(* rsi_ble_on_read_resp_t)(uint16_t resp_status, uint16_t resp_id, rsi_ble_resp_att_value_t *rsi_ble_resp_att_val) )(uint16_t resp_status, uint16_t resp_id, rsi_ble_resp_att_value_t *rsi_ble_resp_att_val)
The callback function will be called upon receiving the attribute value.
| [out] | resp_status | contains the response id because of which, this callback is called response ids: (RSI_BLE_RSP_READ_VAL, RSI_BLE_RSP_READ_BY_UUID, RSI_BLE_RSP_LONG_READ, RSI_BLE_RSP_MULTIPLE_READ) |
| [out] | rsi_ble_resp_att_val | contains the attribute value. Please refer rsi_ble_resp_att_value_s for more info |
Note
Attribute protocol error codes 0x4A01 - Invalid Handle 0x4A0A - Attribute not found 0x4A05 - Insufficient authentication 0x4A08 - Insufficient authorization 0x4A0C - Insufficient encryption key size 0x4A0F - Insufficient encryption 0x4A02 - Read not permitted 0x4A06 - Request not supported 0x4A07 - Invalid offset 0x4A0B - Attribute not Long
Returns
void
description#
This callback function will be called upon receiving the attribute value This callback has to be registered using rsi_ble_gatt_register_callbacks API
2454 of file include/rsi_ble_apis.hrsi_ble_on_write_resp_t#
void(* rsi_ble_on_write_resp_t)(uint16_t resp_status, uint16_t resp_id) )(uint16_t resp_status, uint16_t resp_id)
The callback function will be called if the attribute set/prepare/execute action is completed.
| [out] | resp_status | contains the response id because of which, this callback is called response ids: (RSI_BLE_RSP_WRITE, RSI_BLE_RSP_WRITE_NO_ACK, RSI_BLE_RSP_LONG_WRITE, RSI_BLE_RSP_EXECUTE_WRITE) |
Note
Attribute protocol error codes 0x4A01 - Invalid Handle 0x4A0A - Attribute not found 0x4A05 - Insufficient authentication 0x4A08 - Insufficient authorization 0x4A0C - Insufficient encryption key size 0x4A0F - Insufficient encryption 0x4A03 - Write not permitted 0x4A07 - Invalid offset 0x4A0D - Invalid attribute value length
Returns
void
description#
This callback function will be called if the attribute set/prepare/execute action is completed This callback has to be registered using rsi_ble_gatt_register_callbacks API
2481 of file include/rsi_ble_apis.hrsi_ble_on_gatt_write_event_t#
void(* rsi_ble_on_gatt_write_event_t)(uint16_t event_id, rsi_ble_event_write_t *rsi_ble_write) )(uint16_t event_id, rsi_ble_event_write_t *rsi_ble_write)
The callback function will be called if the GATT write/notify/indicate events are received.
| [out] | event_id | contains the gatt_write event id (RSI_BLE_EVENT_GATT_WRITE) |
| [out] | rsi_ble_write | contains the GATT event information. Please refer rsi_ble_event_write_s for more info |
Returns
void
description#
This callback function will be called if the GATT write/notify/indicate events are received This callback has to be registered using rsi_ble_gatt_register_callbacks API
2499 of file include/rsi_ble_apis.hrsi_ble_on_gatt_prepare_write_event_t#
void(* rsi_ble_on_gatt_prepare_write_event_t)(uint16_t event_id, rsi_ble_event_prepare_write_t *rsi_ble_write) )(uint16_t event_id, rsi_ble_event_prepare_write_t *rsi_ble_write)
The callback function will be called if the GATT prepare events are received.
| [out] | event_id | contains the gatt_prepare_write event id (RSI_BLE_EVENT_PREPARE_WRITE) |
| [out] | rsi_ble_write | contains the GATT prepare event information. Please refer rsi_ble_event_prepare_write_s for more info |
Returns
void
description#
This callback function will be called if the GATT prepare event is received This callback has to be registered using rsi_ble_gatt_register_callbacks API
2512 of file include/rsi_ble_apis.hrsi_ble_on_execute_write_event_t#
void(* rsi_ble_on_execute_write_event_t)(uint16_t event_id, rsi_ble_execute_write_t *rsi_ble_execute_write) )(uint16_t event_id, rsi_ble_execute_write_t *rsi_ble_execute_write)
The callback function will be called if the GATT execute events are received.
| [out] | event_id | contains the gatt_execute_write event id (RSI_BLE_EVENT_EXECUTE_WRITE) |
| [out] | rsi_ble_write | contains the GATT event information. Please refer rsi_ble_execute_write_s for more info. |
Returns
void
description#
This callback function will be called if the GATT execute event is received This callback has to be registered using rsi_ble_gatt_register_callbacks API
2524 of file include/rsi_ble_apis.hrsi_ble_on_read_req_event_t#
void(* rsi_ble_on_read_req_event_t)(uint16_t event_id, rsi_ble_read_req_t *rsi_ble_read_req) )(uint16_t event_id, rsi_ble_read_req_t *rsi_ble_read_req)
The callback function will be called if the GATT read request events are received.
| [out] | event_id | contains the gatt_read_req_event id (RSI_BLE_EVENT_READ_REQ) |
| [out] | rsi_ble_write | contains the GATT event information. Please refer rsi_ble_read_req_s for more info. |
Returns
void
description#
This callback function will be called if the GATT read request event is received This callback has to be registered using rsi_ble_gatt_register_callbacks API
2537 of file include/rsi_ble_apis.hrsi_ble_on_mtu_event_t#
void(* rsi_ble_on_mtu_event_t)(rsi_ble_event_mtu_t *rsi_ble_event_mtu) )(rsi_ble_event_mtu_t *rsi_ble_event_mtu)
The callback function will be called if MTU size request is received.
| [out] | rsi_ble_event_mtu | contains the MTU size information. Please refer rsi_ble_event_mtu_s for more info. |
Returns
void
description#
This callback function will be called when connected to indicate MTU size This callback has to be registered using rsi_ble_gatt_register_callbacks API
2548 of file include/rsi_ble_apis.hrsi_ble_on_mtu_exchange_info_t#
void(* rsi_ble_on_mtu_exchange_info_t)(rsi_ble_event_mtu_exchange_information_t *rsi_ble_event_mtu_exchange_info) )(rsi_ble_event_mtu_exchange_information_t *rsi_ble_event_mtu_exchange_info)
Callback function to indicate MTU size and who initated MTU Exchange Request.
| [out] | rsi_ble_event_mtu_exchange_info | contains the MTU exchange information. Please refer rsi_ble_event_mtu_exchange_information_s for more info. |
Returns
void
description#
This callback function will be called when connected, this event will contain MTU Exchange Information This callback has to be registered using rsi_ble_gatt_extended_register_callbacks API
2559 of file include/rsi_ble_apis.hrsi_ble_on_remote_device_info_t#
void(* rsi_ble_on_remote_device_info_t)(uint16_t status, rsi_ble_event_remote_device_info_t *resp_buffer) )(uint16_t status, rsi_ble_event_remote_device_info_t *resp_buffer)
Callback function to get peer device information.
| [in] | status | - status of the asynchronous response |
| [out] | resp_buffer | - remote device ble version information. Please refer rsi_ble_event_remote_device_info_s for more info. |
Returns
void
description#
This callback function will be called when conn update complete event is received This callback has to be registered using rsi_ble_enhanced_gap_extended_register_callbacks API
2572 of file include/rsi_ble_apis.hrsi_ble_on_rcp_resp_rcvd_t#
typedef void(* rsi_ble_on_rcp_resp_rcvd_t) (uint16_t status, rsi_ble_event_rcp_rcvd_info_t *resp_buffer) )(uint16_t status, rsi_ble_event_rcp_rcvd_info_t *resp_buffer)
2573 of file include/rsi_ble_apis.h