NAT64#

This module includes functions and structs for the NAT64 function on the border router.

These functions are only available when OPENTHREAD_CONFIG_NAT64_BORDER_ROUTING_ENABLE is enabled.

Modules#

otIp4Address

otIp4Cidr

otNat64Counters

otNat64ProtocolCounters

otNat64ErrorCounters

otNat64AddressMapping

otNat64AddressMappingIterator

Enumerations#

enum
OT_NAT64_DROP_REASON_UNKNOWN = 0
OT_NAT64_DROP_REASON_ILLEGAL_PACKET
OT_NAT64_DROP_REASON_UNSUPPORTED_PROTO
OT_NAT64_DROP_REASON_NO_MAPPING
OT_NAT64_DROP_REASON_COUNT
}

Packet drop reasons.

enum
OT_NAT64_STATE_DISABLED = 0
OT_NAT64_STATE_NOT_RUNNING
OT_NAT64_STATE_IDLE
OT_NAT64_STATE_ACTIVE
}

States of NAT64.

Typedefs#

typedef struct otIp4Address

Represents an IPv4 address.

typedef struct otIp4Cidr
typedef struct otNat64Counters

Represents the counters for NAT64.

Represents the counters for the protocols supported by NAT64.

typedef enum otNat64DropReason

Packet drop reasons.

typedef struct otNat64ErrorCounters

Represents the counters of dropped packets due to errors when handling NAT64 packets.

typedef struct otNat64AddressMapping

Represents an address mapping record for NAT64.

Used to iterate through NAT64 address mappings.

typedef void(*
otNat64ReceiveIp4Callback)(otMessage *aMessage, void *aContext)

Pointer is called when an IPv4 datagram (translated by NAT64 translator) is received.

Functions#

void
otNat64GetCounters(otInstance *aInstance, otNat64ProtocolCounters *aCounters)

Gets NAT64 translator counters.

void
otNat64GetErrorCounters(otInstance *aInstance, otNat64ErrorCounters *aCounters)

Gets the NAT64 translator error counters.

void
otNat64InitAddressMappingIterator(otInstance *aInstance, otNat64AddressMappingIterator *aIterator)

Initializes an otNat64AddressMappingIterator.

otNat64GetNextAddressMapping(otInstance *aInstance, otNat64AddressMappingIterator *aIterator, otNat64AddressMapping *aMapping)

Gets the next AddressMapping info (using an iterator).

otNat64GetTranslatorState(otInstance *aInstance)

Gets the state of NAT64 translator.

otNat64GetPrefixManagerState(otInstance *aInstance)

Gets the state of NAT64 prefix manager.

void
otNat64SetEnabled(otInstance *aInstance, bool aEnabled)

Enable or disable NAT64 functions.

otIp4NewMessage(otInstance *aInstance, const otMessageSettings *aSettings)

Allocate a new message buffer for sending an IPv4 message to the NAT64 translator.

otNat64SetIp4Cidr(otInstance *aInstance, const otIp4Cidr *aCidr)

Sets the CIDR used when setting the source address of the outgoing translated IPv4 packets.

otNat64Send(otInstance *aInstance, otMessage *aMessage)

Translates an IPv4 datagram to an IPv6 datagram and sends via the Thread interface.

void
otNat64SetReceiveIp4Callback(otInstance *aInstance, otNat64ReceiveIp4Callback aCallback, void *aContext)

Registers a callback to provide received IPv4 datagrams.

otNat64GetCidr(otInstance *aInstance, otIp4Cidr *aCidr)

Gets the IPv4 CIDR configured in the NAT64 translator.

bool
otIp4IsAddressEqual(const otIp4Address *aFirst, const otIp4Address *aSecond)

Test if two IPv4 addresses are the same.

void
otIp4ExtractFromIp6Address(uint8_t aPrefixLength, const otIp6Address *aIp6Address, otIp4Address *aIp4Address)

Set aIp4Address by performing NAT64 address translation from aIp6Address as specified in RFC 6052.

otIp4FromIp4MappedIp6Address(const otIp6Address *aIp6Address, otIp4Address *aIp4Address)

Extracts the IPv4 address from a given IPv4-mapped IPv6 address.

void
otIp4ToIp4MappedIp6Address(const otIp4Address *aIp4Address, otIp6Address *aIp6Address)

Converts a given IP4 address to an IPv6 address following the IPv4-mapped IPv6 address format.

void
otIp4AddressToString(const otIp4Address *aAddress, char *aBuffer, uint16_t aSize)

Converts the address to a string.

otIp4CidrFromString(const char *aString, otIp4Cidr *aCidr)

Converts a human-readable IPv4 CIDR string into a binary representation.

void
otIp4CidrToString(const otIp4Cidr *aCidr, char *aBuffer, uint16_t aSize)

Converts the IPv4 CIDR to a string.

otIp4AddressFromString(const char *aString, otIp4Address *aAddress)

Converts a human-readable IPv4 address string into a binary representation.

otNat64SynthesizeIp6Address(otInstance *aInstance, const otIp4Address *aIp4Address, otIp6Address *aIp6Address)

Sets the IPv6 address by performing NAT64 address translation from the preferred NAT64 prefix and the given IPv4 address as specified in RFC 6052.

Macros#

#define

Size of an IPv4 address (bytes)

#define

Length of 000.000.000.000 plus a suffix NUL.

#define

Length of 000.000.000.000/00 plus a suffix NUL.

Enumeration Documentation#

otNat64DropReason#

otNat64DropReason

Packet drop reasons.

Enumerator
OT_NAT64_DROP_REASON_UNKNOWN

Packet drop for unknown reasons.

OT_NAT64_DROP_REASON_ILLEGAL_PACKET

Packet drop due to failed to parse the datagram.

OT_NAT64_DROP_REASON_UNSUPPORTED_PROTO

Packet drop due to unsupported IP protocol.

OT_NAT64_DROP_REASON_NO_MAPPING

Packet drop due to no mappings found or mapping pool exhausted.

OT_NAT64_DROP_REASON_COUNT

Definition at line 119 of file include/openthread/nat64.h

otNat64State#

otNat64State

States of NAT64.

Enumerator
OT_NAT64_STATE_DISABLED

NAT64 is disabled.

OT_NAT64_STATE_NOT_RUNNING

NAT64 is enabled, but one or more dependencies of NAT64 are not running.

OT_NAT64_STATE_IDLE

NAT64 is enabled, but this BR is not an active NAT64 BR.

OT_NAT64_STATE_ACTIVE

The BR is publishing a NAT64 prefix and/or translating packets.


Definition at line 233 of file include/openthread/nat64.h

Typedef Documentation#

otIp4Address#

typedef struct otIp4Address otIp4Address

Represents an IPv4 address.


Definition at line 77 of file include/openthread/nat64.h

otIp4Cidr#

typedef struct otIp4Cidr otIp4Cidr

Definition at line 89 of file include/openthread/nat64.h

otNat64Counters#

typedef struct otNat64Counters otNat64Counters

Represents the counters for NAT64.


Definition at line 101 of file include/openthread/nat64.h

otNat64ProtocolCounters#

typedef struct otNat64ProtocolCounters otNat64ProtocolCounters

Represents the counters for the protocols supported by NAT64.


Definition at line 113 of file include/openthread/nat64.h

otNat64DropReason#

typedef enum otNat64DropReason otNat64DropReason

Packet drop reasons.


Definition at line 127 of file include/openthread/nat64.h

otNat64ErrorCounters#

typedef struct otNat64ErrorCounters otNat64ErrorCounters

Represents the counters of dropped packets due to errors when handling NAT64 packets.


Definition at line 137 of file include/openthread/nat64.h

otNat64AddressMapping#

typedef struct otNat64AddressMapping otNat64AddressMapping

Represents an address mapping record for NAT64.

Note

  • The counters will be reset for each mapping session even for the same address pair. Applications can use mId to identify different sessions to calculate the packets correctly.


Definition at line 179 of file include/openthread/nat64.h

otNat64AddressMappingIterator#

typedef struct otNat64AddressMappingIterator otNat64AddressMappingIterator

Used to iterate through NAT64 address mappings.

The fields in this type are opaque (intended for use by OpenThread core only) and therefore should not be accessed or used by caller.

Before using an iterator, it MUST be initialized using otNat64AddressMappingIteratorInit().


Definition at line 193 of file include/openthread/nat64.h

otNat64ReceiveIp4Callback#

typedef void(* otNat64ReceiveIp4Callback) (otMessage *aMessage, void *aContext) )(otMessage *aMessage, void *aContext)

Pointer is called when an IPv4 datagram (translated by NAT64 translator) is received.

Parameters
[in]aMessage

A pointer to the message buffer containing the received IPv6 datagram. This function transfers the ownership of the aMessage to the receiver of the callback. The message should be freed by the receiver of the callback after it is processed.

[in]aContext

A pointer to application-specific context.


Definition at line 369 of file include/openthread/nat64.h

Variable Documentation#

OT_TOOL_PACKED_END#

OT_TOOL_PACKED_BEGIN struct otIp4Address OT_TOOL_PACKED_END

Definition at line 71 of file include/openthread/nat64.h

Function Documentation#

otNat64GetCounters#

void otNat64GetCounters (otInstance * aInstance, otNat64ProtocolCounters * aCounters)

Gets NAT64 translator counters.

Parameters
[in]aInstance

A pointer to an OpenThread instance.

[out]aCounters

A pointer to an otNat64Counters where the counters of NAT64 translator will be placed.

The counter is counted since the instance initialized.

Available when OPENTHREAD_CONFIG_NAT64_TRANSLATOR_ENABLE is enabled.


Definition at line 150 of file include/openthread/nat64.h

otNat64GetErrorCounters#

void otNat64GetErrorCounters (otInstance * aInstance, otNat64ErrorCounters * aCounters)

Gets the NAT64 translator error counters.

Parameters
[in]aInstance

A pointer to an OpenThread instance.

[out]aCounters

A pointer to an otNat64Counters where the counters of NAT64 translator will be placed.

The counters are initialized to zero when the OpenThread instance is initialized.


Definition at line 161 of file include/openthread/nat64.h

otNat64InitAddressMappingIterator#

void otNat64InitAddressMappingIterator (otInstance * aInstance, otNat64AddressMappingIterator * aIterator)

Initializes an otNat64AddressMappingIterator.

Parameters
[in]aInstance

The OpenThread instance.

[out]aIterator

A pointer to the iterator to initialize.

An iterator MUST be initialized before it is used.

An iterator can be initialized again to restart from the beginning of the mapping info.


Definition at line 206 of file include/openthread/nat64.h

otNat64GetNextAddressMapping#

otError otNat64GetNextAddressMapping (otInstance * aInstance, otNat64AddressMappingIterator * aIterator, otNat64AddressMapping * aMapping)

Gets the next AddressMapping info (using an iterator).

Parameters
[in]aInstance

A pointer to an OpenThread instance.

[inout]aIterator

A pointer to the iterator. On success the iterator will be updated to point to next NAT64 address mapping record. To get the first entry the iterator should be set to OT_NAT64_ADDRESS_MAPPING_ITERATOR_INIT.

[out]aMapping

A pointer to an otNat64AddressMapping where information of next NAT64 address mapping record is placed (on success).

Available when OPENTHREAD_CONFIG_NAT64_TRANSLATOR_ENABLE is enabled.


Definition at line 225 of file include/openthread/nat64.h

otNat64GetTranslatorState#

otNat64State otNat64GetTranslatorState (otInstance * aInstance)

Gets the state of NAT64 translator.

Parameters
[in]aInstance

A pointer to an OpenThread instance.

Available when OPENTHREAD_CONFIG_NAT64_TRANSLATOR_ENABLE is enabled.


Definition at line 254 of file include/openthread/nat64.h

otNat64GetPrefixManagerState#

otNat64State otNat64GetPrefixManagerState (otInstance * aInstance)

Gets the state of NAT64 prefix manager.

Parameters
[in]aInstance

A pointer to an OpenThread instance.

Available when OPENTHREAD_CONFIG_NAT64_BORDER_ROUTING_ENABLE is enabled.


Definition at line 273 of file include/openthread/nat64.h

otNat64SetEnabled#

void otNat64SetEnabled (otInstance * aInstance, bool aEnabled)

Enable or disable NAT64 functions.

Parameters
[in]aInstance

A pointer to an OpenThread instance.

[in]aEnabled

A boolean to enable/disable the NAT64 functions

Note: This includes the NAT64 Translator (when OPENTHREAD_CONFIG_NAT64_TRANSLATOR_ENABLE is enabled) and the NAT64 Prefix Manager (when OPENTHREAD_CONFIG_NAT64_BORDER_ROUTING_ENABLE is enabled).

When OPENTHREAD_CONFIG_NAT64_TRANSLATOR_ENABLE is enabled, setting disabled to true resets the mapping table in the translator.

Available when OPENTHREAD_CONFIG_NAT64_TRANSLATOR_ENABLE or OPENTHREAD_CONFIG_NAT64_BORDER_ROUTING_ENABLE is enabled.

See Also


Definition at line 294 of file include/openthread/nat64.h

otIp4NewMessage#

otMessage * otIp4NewMessage (otInstance * aInstance, const otMessageSettings * aSettings)

Allocate a new message buffer for sending an IPv4 message to the NAT64 translator.

Parameters
[in]aInstance

A pointer to an OpenThread instance.

[in]aSettings

A pointer to the message settings or NULL to set default settings.

Message buffers allocated by this function will have 20 bytes (difference between the size of IPv6 headers and IPv4 header sizes) reserved.

Available when OPENTHREAD_CONFIG_NAT64_TRANSLATOR_ENABLE is enabled.

Note

  • If aSettings is NULL, the link layer security is enabled and the message priority is set to OT_MESSAGE_PRIORITY_NORMAL by default.

Returns

  • A pointer to the message buffer or NULL if no message buffers are available or parameters are invalid.

See Also


Definition at line 315 of file include/openthread/nat64.h

otNat64SetIp4Cidr#

otError otNat64SetIp4Cidr (otInstance * aInstance, const otIp4Cidr * aCidr)

Sets the CIDR used when setting the source address of the outgoing translated IPv4 packets.

Parameters
[in]aInstance

A pointer to an OpenThread instance.

[in]aCidr

A pointer to an otIp4Cidr for the IPv4 CIDR block for NAT64.

Is available only when OPENTHREAD_CONFIG_NAT64_TRANSLATOR_ENABLE is enabled.

Note

  • A valid CIDR must have a non-zero prefix length. The actual addresses pool is limited by the size of the mapping pool and the number of addresses available in the CIDR block.

  • This function can be called at any time, but the NAT64 translator will be reset and all existing sessions will be expired when updating the configured CIDR.

See Also

  • otBorderRouterSend

  • otBorderRouterSetReceiveCallback


Definition at line 338 of file include/openthread/nat64.h

otNat64Send#

otError otNat64Send (otInstance * aInstance, otMessage * aMessage)

Translates an IPv4 datagram to an IPv6 datagram and sends via the Thread interface.

Parameters
[in]aInstance

A pointer to an OpenThread instance.

[in]aMessage

A pointer to the message buffer containing the IPv4 datagram.

The caller transfers ownership of aMessage when making this call. OpenThread will free aMessage when processing is complete, including when a value other than OT_ERROR_NONE is returned.


Definition at line 358 of file include/openthread/nat64.h

otNat64SetReceiveIp4Callback#

void otNat64SetReceiveIp4Callback (otInstance * aInstance, otNat64ReceiveIp4Callback aCallback, void * aContext)

Registers a callback to provide received IPv4 datagrams.

Parameters
[in]aInstance

A pointer to an OpenThread instance.

[in]aCallback

A pointer to a function that is called when an IPv4 datagram is received or NULL to disable the callback.

[in]aContext

A pointer to application-specific context.


Definition at line 380 of file include/openthread/nat64.h

otNat64GetCidr#

otError otNat64GetCidr (otInstance * aInstance, otIp4Cidr * aCidr)

Gets the IPv4 CIDR configured in the NAT64 translator.

Parameters
[in]aInstance

A pointer to an OpenThread instance.

[out]aCidr

A pointer to an otIp4Cidr. Where the CIDR will be filled.

Available when OPENTHREAD_CONFIG_NAT64_TRANSLATOR_ENABLE is enabled.


Definition at line 391 of file include/openthread/nat64.h

otIp4IsAddressEqual#

bool otIp4IsAddressEqual (const otIp4Address * aFirst, const otIp4Address * aSecond)

Test if two IPv4 addresses are the same.

Parameters
[in]aFirst

A pointer to the first IPv4 address to compare.

[in]aSecond

A pointer to the second IPv4 address to compare.


Definition at line 403 of file include/openthread/nat64.h

otIp4ExtractFromIp6Address#

void otIp4ExtractFromIp6Address (uint8_t aPrefixLength, const otIp6Address * aIp6Address, otIp4Address * aIp4Address)

Set aIp4Address by performing NAT64 address translation from aIp6Address as specified in RFC 6052.

Parameters
[in]aPrefixLength

The prefix length to use for IPv4/IPv6 translation.

[in]aIp6Address

A pointer to an IPv6 address.

[out]aIp4Address

A pointer to output the IPv4 address.

The NAT64 aPrefixLength MUST be one of the following values: 32, 40, 48, 56, 64, or 96, otherwise the behavior of this method is undefined.


Definition at line 417 of file include/openthread/nat64.h

otIp4FromIp4MappedIp6Address#

otError otIp4FromIp4MappedIp6Address (const otIp6Address * aIp6Address, otIp4Address * aIp4Address)

Extracts the IPv4 address from a given IPv4-mapped IPv6 address.

Parameters
[in]aIp6Address

An IPv6 address to extract IPv4 from.

[out]aIp4Address

An IPv4 address to output the extracted address.

An IPv4-mapped IPv6 address consists of an 80-bit prefix of zeros, the next 16 bits set to ones, and the remaining, least-significant 32 bits contain the IPv4 address, e.g., ::ffff:192.0.2.128 representing 192.0.2.128.


Definition at line 432 of file include/openthread/nat64.h

otIp4ToIp4MappedIp6Address#

void otIp4ToIp4MappedIp6Address (const otIp4Address * aIp4Address, otIp6Address * aIp6Address)

Converts a given IP4 address to an IPv6 address following the IPv4-mapped IPv6 address format.

Parameters
[in]aIp4Address

An IPv4 address to convert.

[out]aIp6Address

An IPv6 address to set.


Definition at line 441 of file include/openthread/nat64.h

otIp4AddressToString#

void otIp4AddressToString (const otIp4Address * aAddress, char * aBuffer, uint16_t aSize)

Converts the address to a string.

Parameters
[in]aAddress

A pointer to an IPv4 address (MUST NOT be NULL).

[out]aBuffer

A pointer to a char array to output the string (MUST NOT be nullptr).

[in]aSize

The size of aBuffer (in bytes).

The string format uses quad-dotted notation of four bytes in the address (e.g., "127.0.0.1").

If the resulting string does not fit in aBuffer (within its aSize characters), the string will be truncated but the outputted string is always null-terminated.


Definition at line 458 of file include/openthread/nat64.h

otIp4CidrFromString#

otError otIp4CidrFromString (const char * aString, otIp4Cidr * aCidr)

Converts a human-readable IPv4 CIDR string into a binary representation.

Parameters
[in]aString

A pointer to a NULL-terminated string.

[out]aCidr

A pointer to an IPv4 CIDR.


Definition at line 472 of file include/openthread/nat64.h

otIp4CidrToString#

void otIp4CidrToString (const otIp4Cidr * aCidr, char * aBuffer, uint16_t aSize)

Converts the IPv4 CIDR to a string.

Parameters
[in]aCidr

A pointer to an IPv4 CIDR (MUST NOT be NULL).

[out]aBuffer

A pointer to a char array to output the string (MUST NOT be nullptr).

[in]aSize

The size of aBuffer (in bytes).

The string format uses quad-dotted notation of four bytes in the address with the length of prefix (e.g., "127.0.0.1/32").

If the resulting string does not fit in aBuffer (within its aSize characters), the string will be truncated but the outputted string is always null-terminated.


Definition at line 488 of file include/openthread/nat64.h

otIp4AddressFromString#

otError otIp4AddressFromString (const char * aString, otIp4Address * aAddress)

Converts a human-readable IPv4 address string into a binary representation.

Parameters
[in]aString

A pointer to a NULL-terminated string.

[out]aAddress

A pointer to an IPv4 address.


Definition at line 500 of file include/openthread/nat64.h

otNat64SynthesizeIp6Address#

otError otNat64SynthesizeIp6Address (otInstance * aInstance, const otIp4Address * aIp4Address, otIp6Address * aIp6Address)

Sets the IPv6 address by performing NAT64 address translation from the preferred NAT64 prefix and the given IPv4 address as specified in RFC 6052.

Parameters
[in]aInstance

A pointer to an OpenThread instance.

[in]aIp4Address

A pointer to the IPv4 address to translate to IPv6.

[out]aIp6Address

A pointer to the synthesized IPv6 address.

Returns

  • OT_ERROR_NONE Successfully synthesized the IPv6 address from NAT64 prefix and IPv4 address.

  • OT_ERROR_INVALID_STATE No valid NAT64 prefix in the network data.


Definition at line 514 of file include/openthread/nat64.h

Macro Definition Documentation#

OT_IP4_ADDRESS_SIZE#

#define OT_IP4_ADDRESS_SIZE
Value:
4

Size of an IPv4 address (bytes)


Definition at line 55 of file include/openthread/nat64.h

OT_IP4_ADDRESS_STRING_SIZE#

#define OT_IP4_ADDRESS_STRING_SIZE
Value:
17

Length of 000.000.000.000 plus a suffix NUL.


Definition at line 443 of file include/openthread/nat64.h

OT_IP4_CIDR_STRING_SIZE#

#define OT_IP4_CIDR_STRING_SIZE
Value:
20

Length of 000.000.000.000/00 plus a suffix NUL.


Definition at line 460 of file include/openthread/nat64.h