Calibration Flags#

This section provides a reference to the calibration flags in the boot configuration.

Macros#

#define

SL_SI91X_BURN_GAIN_OFFSET BIT(0)

Burn Gain offset into the device.

#define

SL_SI91X_BURN_FREQ_OFFSET BIT(1)

Burn Frequency offset into the device.

#define

SL_SI91X_SW_XO_CTUNE_VALID BIT(2)

Software XO CTUNE is valid.

#define

SL_SI91X_BURN_XO_FAST_DISABLE BIT(3)

Burn Bit to disable XO Fast into the device.