Callbacks Declarations#

rsi_ble_on_adv_report_event_t#

void(* rsi_ble_on_adv_report_event_t)(rsi_ble_event_adv_report_t *rsi_ble_event_adv) )(rsi_ble_event_adv_report_t *rsi_ble_event_adv)

The callback function will be called if advertise report event is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the advertise event report is received from the module

• This callback has to be registered using rsi_ble_gap_register_callbacks API

rsi_ble_on_connect_t#

void(* rsi_ble_on_connect_t)(rsi_ble_event_conn_status_t *rsi_ble_event_conn) )(rsi_ble_event_conn_status_t *rsi_ble_event_conn)

The callback function will be called if BLE connection status is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the BLE connection status is received from the module. For BLE 4.1 and lower version this callback will be called

• This callback has to be registered using rsi_ble_gap_register_callbacks API

rsi_ble_on_enhance_connect_t#

void(* rsi_ble_on_enhance_connect_t)(rsi_ble_event_enhance_conn_status_t *rsi_ble_event_enhance_conn) )(rsi_ble_event_enhance_conn_status_t *rsi_ble_event_enhance_conn)

The callback function will be called if BLE connection status is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the BLE connection status is received from the module. For BLE 4.2 and above version this callback will be called

• This callback has to be registered using rsi_ble_gap_register_callbacks API

rsi_ble_on_disconnect_t#

void(* rsi_ble_on_disconnect_t)(rsi_ble_event_disconnect_t *rsi_ble_event_disconnect, uint16_t reason) )(rsi_ble_event_disconnect_t *rsi_ble_event_disconnect, uint16_t reason)

The callback function will be called if disconnect event is received.

Note

• Few reason for failure are given below

  • 0x4E13 Remote user terminated connection

  • 0x4E14 Remote device terminated connection due to low resources

  • 0x4E15 Remote device terminated connection due to power off

  • 0x4E3D Connection terminated due to MIC failure

  • 0x4E3E Connection Failed to be Established

  • 0x4E60 Invalid Handle Range

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the disconnect status event is received from the module

• This callback has to be registered using rsi_ble_gap_register_callbacks API

rsi_ble_on_le_ping_payload_timeout_t#

void(* rsi_ble_on_le_ping_payload_timeout_t)(rsi_ble_event_le_ping_time_expired_t *rsi_ble_event_timeout_expired) )(rsi_ble_event_le_ping_time_expired_t *rsi_ble_event_timeout_expired)

The callback function will be called if le ping payload timeout expired event is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the le ping time expired event is received from the module

• This callback has to be registered using rsi_ble_gap_register_callbacks API

rsi_ble_on_le_ltk_req_event_t#

void(* rsi_ble_on_le_ltk_req_event_t)(rsi_bt_event_le_ltk_request_t *rsi_ble_event_le_ltk_request) )(rsi_bt_event_le_ltk_request_t *rsi_ble_event_le_ltk_request)

The callback function will be called if LE LTK request event is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if LE LTK request event is received from the module

• This callback has to be registered using rsi_ble_smp_register_callbacks API

rsi_ble_on_le_security_keys_t#

void(* rsi_ble_on_le_security_keys_t)(rsi_bt_event_le_security_keys_t *rsi_ble_event_le_security_keys) )(rsi_bt_event_le_security_keys_t *rsi_ble_event_le_security_keys)

The callback function will be called if LE security keys event is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if LE security keys event is received from the module

• This callback has to be registered using rsi_ble_smp_register_callbacks API

rsi_ble_on_smp_request_t#

void(* rsi_ble_on_smp_request_t)(rsi_bt_event_smp_req_t *remote_dev_address) )(rsi_bt_event_smp_req_t *remote_dev_address)

The callback function will be called if smp request is received in central mode.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the smp request is received from the remote device

• This callback has to be registered using rsi_ble_smp_register_callbacks API

rsi_ble_on_smp_response_t#

void(* rsi_ble_on_smp_response_t)(rsi_bt_event_smp_resp_t *remote_dev_address) )(rsi_bt_event_smp_resp_t *remote_dev_address)

The callback function will be called if smp request is received in peripheral mode.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the smp request is received from the remote device

• This callback has to be registered using rsi_ble_smp_register_callbacks API

rsi_ble_on_smp_passkey_t#

void(* rsi_ble_on_smp_passkey_t)(rsi_bt_event_smp_passkey_t *remote_dev_address) )(rsi_bt_event_smp_passkey_t *remote_dev_address)

The callback function will be called if smp passkey event is received from module.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the smp passkey is received from the module

• This callback has to be registered using rsi_ble_smp_register_callbacks API

rsi_ble_on_smp_passkey_display_t#

void(* rsi_ble_on_smp_passkey_display_t)(rsi_bt_event_smp_passkey_display_t *smp_passkey_display) )(rsi_bt_event_smp_passkey_display_t *smp_passkey_display)

The callback function will be called if smp passkey event is received from module.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the smp passkey display is received from the module

• This callback has to be registered using rsi_ble_smp_register_callbacks API

rsi_ble_on_smp_failed_t#

void(* rsi_ble_on_smp_failed_t)(uint16_t resp_status, rsi_bt_event_smp_failed_t *remote_dev_address) )(uint16_t resp_status, rsi_bt_event_smp_failed_t *remote_dev_address)

The callback function will be called if smp failed event is received from module.

Note

• Error codes for SMP FAILED are given below

  • 0x4B01 SMP Passkey entry failed

  • 0x4B02 SMP OOB not available

  • 0x4B03 SMP Authentication Requirements

  • 0x4B04 SMP confirm value failed

  • 0x4B05 SMP Pairing not supported

  • 0x4B06 SMP Encryption key size insufficient

  • 0x4B07 SMP command not supported

  • 0x4B08 SMP Unspecified Reason

  • 0x4B09 SMP repeated attempts

  • 0x4B0C SMP Numeric Comparison Failed

  • 0x4B0B DHKEY Check Failed

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the smp process is failed with remote device

• This callback has to be registered using rsi_ble_smp_register_callbacks API

rsi_ble_on_sc_method_t#

void(* rsi_ble_on_sc_method_t)(rsi_bt_event_sc_method_t *scmethod) )(rsi_bt_event_sc_method_t *scmethod)

The callback function will be called if security method event is received from module.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the SC method is done with remote device

• This callback has to be registered using rsi_ble_smp_register_callbacks API

rsi_ble_on_encrypt_started_t#

void(* rsi_ble_on_encrypt_started_t)(uint16_t resp_status, rsi_bt_event_encryption_enabled_t *enc_enabled) )(uint16_t resp_status, rsi_bt_event_encryption_enabled_t *enc_enabled)

The callback function will be called if encrypted event is received from module.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the encryption process is started with remote device

• This callback has to be registered using rsi_ble_smp_register_callbacks API

rsi_ble_on_sc_passkey_t#

void(* rsi_ble_on_sc_passkey_t)(rsi_bt_event_sc_passkey_t *sc_passkey) )(rsi_bt_event_sc_passkey_t *sc_passkey)

The callback function will be called if BLE Secure connection passkey event received from module.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the BLE Secure connection passkey event received

• This callback has to be registered using rsi_ble_smp_register_callbacks API

rsi_ble_on_phy_update_complete_t#

void(* rsi_ble_on_phy_update_complete_t)(rsi_ble_event_phy_update_t *rsi_ble_event_phy_update_complete) )(rsi_ble_event_phy_update_t *rsi_ble_event_phy_update_complete)

The callback function will be called when PHY update complete event is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called when PHY update complete event is received

• This callback has to be registered using rsi_ble_gap_register_callbacks API

rsi_ble_on_conn_update_complete_t#

void(* rsi_ble_on_conn_update_complete_t)(rsi_ble_event_conn_update_t *rsi_ble_event_conn_update_complete, uint16_t resp_status) )(rsi_ble_event_conn_update_t *rsi_ble_event_conn_update_complete, uint16_t resp_status)

The callback function will be called when conn update complete event is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called when conn update complete event is received

• This callback has to be registered using rsi_ble_gap_register_callbacks API

rsi_ble_on_remote_conn_params_request_t#

void(* rsi_ble_on_remote_conn_params_request_t)(rsi_ble_event_remote_conn_param_req_t *rsi_ble_event_remote_conn_param, uint16_t resp_status) )(rsi_ble_event_remote_conn_param_req_t *rsi_ble_event_remote_conn_param, uint16_t resp_status)

The callback function will be called if remote conn params request is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called when remote conn params request is received

• This callback has to be registered using rsi_ble_gap_register_callbacks API

rsi_ble_on_remote_features_t#

void(* rsi_ble_on_remote_features_t)(rsi_ble_event_remote_features_t *rsi_ble_event_remote_features) )(rsi_ble_event_remote_features_t *rsi_ble_event_remote_features)

Callback function to peer device supported features.

Returns

• The following values are returned:

  • void

description#

This callback function will be called when conn update complete event is received

• This callback has to be registered using rsi_ble_gap_extended_register_callbacks API

rsi_ble_on_le_more_data_req_t#

void(* rsi_ble_on_le_more_data_req_t)(rsi_ble_event_le_dev_buf_ind_t *rsi_ble_more_data_evt) )(rsi_ble_event_le_dev_buf_ind_t *rsi_ble_more_data_evt)

Callback function to LE more data request.

Returns

• The following values are returned:

  • void

description#

This callback function will be called when LE more data event is received

• This callback has to be registered using rsi_ble_gap_extended_register_callbacks API

rsi_ble_on_data_length_update_t#

void(* rsi_ble_on_data_length_update_t)(rsi_ble_event_data_length_update_t *remote_dev_address) )(rsi_ble_event_data_length_update_t *remote_dev_address)

This event is raised when data length is update in controller.

Returns

• The following values are returned:

  • void

description#

This callback function will be called when data length update complete event is received

• This callback has to be registered using rsi_ble_gap_register_callbacks API

rsi_ble_on_directed_adv_report_event_t#

void(* rsi_ble_on_directed_adv_report_event_t)(rsi_ble_event_directedadv_report_t *rsi_ble_event_directed) )(rsi_ble_event_directedadv_report_t *rsi_ble_event_directed)

The callback function will be called if directed advertise report event is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the advertise event report is received from the module

• This callback has to be registered using rsi_ble_gap_register_callbacks API

rsi_ble_on_gatt_error_resp_t#

void(* rsi_ble_on_gatt_error_resp_t)(uint16_t event_status, rsi_ble_event_error_resp_t *rsi_ble_gatt_error) )(uint16_t event_status, rsi_ble_event_error_resp_t *rsi_ble_gatt_error)

The callback function will be called if GATT error event is received.

Note

• Attribute protocol error codes

  • 0x4A01 - Invalid Handle

  • 0x4A06 - Request not supported

  • 0x4A0A - Attribute not found

  • 0x4A05 - Insufficient authentication

  • 0x4A08 - Insufficient authorization

  • 0x4A0C - Insufficient encryption key size

  • 0x4A0F - Insufficient encryption

  • 0x4A02 - Read not permitted

  • 0x4A03 - Write not permitted

  • 0x4A07 - Invalid offset

  • 0x4A0B - Attribute not Long

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the GATT error event is received from the module

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_gatt_desc_val_event_t#

void(* rsi_ble_on_gatt_desc_val_event_t)(uint16_t event_status, rsi_ble_event_gatt_desc_t *rsi_ble_gatt_desc_val) )(uint16_t event_status, rsi_ble_event_gatt_desc_t *rsi_ble_gatt_desc_val)

The callback function will be called if attribute descriptors event is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the attribute descriptors event is received from the module

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_event_profiles_list_t#

void(* rsi_ble_on_event_profiles_list_t)(uint16_t event_status, rsi_ble_event_profiles_list_t *rsi_ble_event_profiles) )(uint16_t event_status, rsi_ble_event_profiles_list_t *rsi_ble_event_profiles)

The callback function will be called if profiles list event is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the profiles list response is received from the module

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_event_profile_by_uuid_t#

void(* rsi_ble_on_event_profile_by_uuid_t)(uint16_t event_status, rsi_ble_event_profile_by_uuid_t *rsi_ble_event_profile) )(uint16_t event_status, rsi_ble_event_profile_by_uuid_t *rsi_ble_event_profile)

The callback function will be called if profile event is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the profile response is received from the module

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_event_read_by_char_services_t#

void(* rsi_ble_on_event_read_by_char_services_t)(uint16_t event_status, rsi_ble_event_read_by_type1_t *rsi_ble_event_read_type1) )(uint16_t event_status, rsi_ble_event_read_by_type1_t *rsi_ble_event_read_type1)

The callback function will be called if characteristic services list event is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the characteristic services list response is received from the module

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_event_read_by_inc_services_t#

void(* rsi_ble_on_event_read_by_inc_services_t)(uint16_t event_status, rsi_ble_event_read_by_type2_t *rsi_ble_event_read_type2) )(uint16_t event_status, rsi_ble_event_read_by_type2_t *rsi_ble_event_read_type2)

The callback function will be called if include services list event is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the include services list response is received from the module

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_event_read_att_value_t#

void(* rsi_ble_on_event_read_att_value_t)(uint16_t event_status, rsi_ble_event_read_by_type3_t *rsi_ble_event_read_type3) )(uint16_t event_status, rsi_ble_event_read_by_type3_t *rsi_ble_event_read_type3)

The callback function will be called if attribute value event is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the attribute value response is received from the module

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_event_read_resp_t#

void(* rsi_ble_on_event_read_resp_t)(uint16_t event_status, rsi_ble_event_att_value_t *rsi_ble_event_att_val) )(uint16_t event_status, rsi_ble_event_att_value_t *rsi_ble_event_att_val)

The callback function will be called if attribute value event is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the attribute value is received from the module

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_event_write_resp_t#

void(* rsi_ble_on_event_write_resp_t)(uint16_t event_status, rsi_ble_set_att_resp_t *rsi_ble_event_set_att_rsp) )(uint16_t event_status, rsi_ble_set_att_resp_t *rsi_ble_event_set_att_rsp)

The callback function will be called if GATT write event is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the GATT write response is received from the module

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_event_indicate_confirmation_t#

void(* rsi_ble_on_event_indicate_confirmation_t)(uint16_t event_status, rsi_ble_set_att_resp_t *rsi_ble_event_set_att_rsp) )(uint16_t event_status, rsi_ble_set_att_resp_t *rsi_ble_event_set_att_rsp)

Callback function to be called if indication confirmation event is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the indication confirmation response is received from the module

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_event_prepare_write_resp_t#

void(* rsi_ble_on_event_prepare_write_resp_t)(uint16_t event_status, rsi_ble_prepare_write_resp_t *rsi_ble_event_prepare_write) )(uint16_t event_status, rsi_ble_prepare_write_resp_t *rsi_ble_event_prepare_write)

The callback function will be called if indication confirmation event is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the GATT prepare response is received from the module

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_profiles_list_resp_t#

void(* rsi_ble_on_profiles_list_resp_t)(uint16_t resp_status, rsi_ble_resp_profiles_list_t *rsi_ble_resp_profiles) )(uint16_t resp_status, rsi_ble_resp_profiles_list_t *rsi_ble_resp_profiles)

The callback function will be called if profiles list response is received.

Note

• Attribute protocol error codes

  • 0x4A01 - Invalid Handle

  • 0x4A0A - Attribute not found

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the profiles list response is received from the module

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_profile_resp_t#

void(* rsi_ble_on_profile_resp_t)(uint16_t resp_status, profile_descriptors_t *rsi_ble_resp_profile) )(uint16_t resp_status, profile_descriptors_t *rsi_ble_resp_profile)

The callback function will be called if profile response is received.

Note

• Attribute protocol error codes

  • 0x4A01 - Invalid Handle

  • 0x4A06 - Request not supported

  • 0x4A0A - Attribute not found

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the profile response is received from the module

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_char_services_resp_t#

void(* rsi_ble_on_char_services_resp_t)(uint16_t resp_status, rsi_ble_resp_char_services_t *rsi_ble_resp_char_serv) )(uint16_t resp_status, rsi_ble_resp_char_services_t *rsi_ble_resp_char_serv)

The callback function will be called if service characteristics response is received.

Note

• Attribute protocol error codes

  • 0x4A01 - Invalid Handle

  • 0x4A06 - Request not supported

  • 0x4A0A - Attribute not found

  • 0x4A05 - Insufficient authentication

  • 0x4A08 - Insufficient authorization

  • 0x4A0C - Insufficient encryption key size

  • 0x4A0F - Insufficient encryption

  • 0x4A02 - Read not permitted

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the service characteristics response is received from the module

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_inc_services_resp_t#

void(* rsi_ble_on_inc_services_resp_t)(uint16_t resp_status, rsi_ble_resp_inc_services_t *rsi_ble_resp_inc_serv) )(uint16_t resp_status, rsi_ble_resp_inc_services_t *rsi_ble_resp_inc_serv)

The callback function will be called if include services response is received.

Note

• Attribute protocol error codes

  • 0x4A01 - Invalid Handle

  • 0x4A06 - Request not supported

  • 0x4A0A - Attribute not found

  • 0x4A05 - Insufficient authentication

  • 0x4A08 - Insufficient authorization

  • 0x4A0C - Insufficient encryption key size

  • 0x4A0F - Insufficient encryption

  • 0x4A02 - Read not permitted

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the include service response is received from the module

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_att_desc_resp_t#

void(* rsi_ble_on_att_desc_resp_t)(uint16_t resp_status, rsi_ble_resp_att_descs_t *rsi_ble_resp_att_desc) )(uint16_t resp_status, rsi_ble_resp_att_descs_t *rsi_ble_resp_att_desc)

The callback function will be called if attribute descriptors response is received.

Note

• Attribute protocol error codes

  • 0x4A01 - Invalid Handle

  • 0x4A0A - Attribute not found

  • 0x4A05 - Insufficient authentication

  • 0x4A08 - Insufficient authorization

  • 0x4A0C - Insufficient encryption key size

  • 0x4A0F - Insufficient encryption

  • 0x4A02 - Read not permitted

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the attribute descriptors response is received from the module

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_read_resp_t#

void(* rsi_ble_on_read_resp_t)(uint16_t resp_status, uint16_t resp_id, rsi_ble_resp_att_value_t *rsi_ble_resp_att_val) )(uint16_t resp_status, uint16_t resp_id, rsi_ble_resp_att_value_t *rsi_ble_resp_att_val)

The callback function will be called upon receiving the attribute value.

Note

• Attribute protocol error codes

  • 0x4A01 - Invalid Handle

  • 0x4A0A - Attribute not found

  • 0x4A05 - Insufficient authentication

  • 0x4A08 - Insufficient authorization

  • 0x4A0C - Insufficient encryption key size

  • 0x4A0F - Insufficient encryption

  • 0x4A02 - Read not permitted

  • 0x4A06 - Request not supported

  • 0x4A07 - Invalid offset

  • 0x4A0B - Attribute not Long

Returns

• The following values are returned:

  • void

description#

This callback function will be called upon receiving the attribute value

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_write_resp_t#

void(* rsi_ble_on_write_resp_t)(uint16_t resp_status, uint16_t resp_id) )(uint16_t resp_status, uint16_t resp_id)

The callback function will be called if the attribute set/prepare/execute action is completed.

Note

• Attribute protocol error codes

  • 0x4A01 - Invalid Handle

  • 0x4A0A - Attribute not found

  • 0x4A05 - Insufficient authentication

  • 0x4A08 - Insufficient authorization

  • 0x4A0C - Insufficient encryption key size

  • 0x4A0F - Insufficient encryption

  • 0x4A03 - Write not permitted

  • 0x4A07 - Invalid offset

  • 0x4A0D - Invalid attribute value length

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the attribute set/prepare/execute action is completed

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_gatt_write_event_t#

void(* rsi_ble_on_gatt_write_event_t)(uint16_t event_id, rsi_ble_event_write_t *rsi_ble_write) )(uint16_t event_id, rsi_ble_event_write_t *rsi_ble_write)

The callback function will be called if the GATT write/notify/indicate events are received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the GATT write/notify/indicate events are received

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_gatt_prepare_write_event_t#

void(* rsi_ble_on_gatt_prepare_write_event_t)(uint16_t event_id, rsi_ble_event_prepare_write_t *rsi_ble_write) )(uint16_t event_id, rsi_ble_event_prepare_write_t *rsi_ble_write)

The callback function will be called if the GATT prepare events are received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the GATT prepare event is received

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_execute_write_event_t#

void(* rsi_ble_on_execute_write_event_t)(uint16_t event_id, rsi_ble_execute_write_t *rsi_ble_execute_write) )(uint16_t event_id, rsi_ble_execute_write_t *rsi_ble_execute_write)

The callback function will be called if the GATT execute events are received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the GATT execute event is received

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_read_req_event_t#

void(* rsi_ble_on_read_req_event_t)(uint16_t event_id, rsi_ble_read_req_t *rsi_ble_read_req) )(uint16_t event_id, rsi_ble_read_req_t *rsi_ble_read_req)

The callback function will be called if the GATT read request events are received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called if the GATT read request event is received

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_mtu_event_t#

void(* rsi_ble_on_mtu_event_t)(rsi_ble_event_mtu_t *rsi_ble_event_mtu) )(rsi_ble_event_mtu_t *rsi_ble_event_mtu)

The callback function will be called if MTU size request is received.

Returns

• The following values are returned:

  • void

description#

This callback function will be called when connected to indicate MTU size

• This callback has to be registered using rsi_ble_gatt_register_callbacks API

rsi_ble_on_mtu_exchange_info_t#

void(* rsi_ble_on_mtu_exchange_info_t)(rsi_ble_event_mtu_exchange_information_t *rsi_ble_event_mtu_exchange_info) )(rsi_ble_event_mtu_exchange_information_t *rsi_ble_event_mtu_exchange_info)

Callback function to indicate MTU size and who initiated MTU Exchange Request.

Returns

• The following values are returned:

  • void

description#

This callback function will be called when connected, this event will contain MTU Exchange Information

• This callback has to be registered using rsi_ble_gatt_extended_register_callbacks API

rsi_ble_on_remote_device_info_t#

typedef void(* rsi_ble_on_remote_device_info_t) (uint16_t status, rsi_ble_event_remote_device_info_t *resp_buffer) )(uint16_t status, rsi_ble_event_remote_device_info_t *resp_buffer)

@callback rsi_ble_on_remote_device_info_t

Callback function to peer device information. Note

• Refer Bluetooth Generic Error Codes section up to 0x4FF8 from error-codes.

Returns

• The following values are returned:

  • void

description#

This callback function will be called when conn update complete event is received This callback has to be registered using rsi_ble_enhanced_gap_extended_register_callbacks API

rsi_ble_on_rcp_resp_rcvd_t#

typedef void(* rsi_ble_on_rcp_resp_rcvd_t) (uint16_t status, rsi_ble_event_rcp_rcvd_info_t *resp_buffer) )(uint16_t status, rsi_ble_event_rcp_rcvd_info_t *resp_buffer)