Test Mode#

Modules#

rsi_ble_per_transmit_s

rsi_ble_per_receive_s

Typedefs#

Functions#

int32_t
rsi_ble_rx_test_mode(uint8_t rx_channel, uint8_t phy, uint8_t modulation)

Start the BLE RX test mode in controller.

int32_t
rsi_ble_tx_test_mode(uint8_t tx_channel, uint8_t phy, uint8_t tx_len, uint8_t mode)

Start the BLE TX test mode in controller.

int32_t
rsi_ble_end_test_mode(uint16_t *num_of_pkts)

Stop the BLE TX / RX test mode in controller.

int32_t
rsi_ble_per_transmit(struct rsi_ble_per_transmit_s *rsi_ble_per_tx)

Initiate the BLE transmit PER mode in the controller.

int32_t
rsi_ble_per_receive(struct rsi_ble_per_receive_s *rsi_ble_per_rx)

Initiate the BLE receive PER mode in the controller.

Typedef Documentation#

rsi_ble_per_transmit_t#

typedef struct rsi_ble_per_transmit_s rsi_ble_per_transmit_t

Definition at line 1229 of file components/device/silabs/si91x/wireless/ble/inc/rsi_ble_apis.h

rsi_ble_per_receive_t#

typedef struct rsi_ble_per_receive_s rsi_ble_per_receive_t

Definition at line 1321 of file components/device/silabs/si91x/wireless/ble/inc/rsi_ble_apis.h

Function Documentation#

rsi_ble_rx_test_mode#

int32_t rsi_ble_rx_test_mode (uint8_t rx_channel, uint8_t phy, uint8_t modulation)

Start the BLE RX test mode in controller.

Parameters
[in]rx_channel

- Channel in which packet have to be received (0 - 39)

[in]phy

- 0x00 Reserved for future use

  • 0x01 Receiver set to use the LE 1M PHY

  • 0x02 Receiver set to use the LE 2M PHY

  • 0x03 Receiver set to use the LE Coded PHY

  • (0x04 - 0xFF) Reserved for future use.

[in]modulation

- 0x00 Assume transmitter will have a standard standard modulation index

  • 0x01 Assume transmitter will have a stable modulation index

  • (0x02 - 0xFF) Reserved for future use

This is a Blocking API Returns

  • The following values are returned:

    • 0 - Success

    • Non-Zero Value - Failure

Note


Definition at line 2799 of file components/device/silabs/si91x/wireless/ble/inc/rsi_ble_apis.h

rsi_ble_tx_test_mode#

int32_t rsi_ble_tx_test_mode (uint8_t tx_channel, uint8_t phy, uint8_t tx_len, uint8_t mode)

Start the BLE TX test mode in controller.

Parameters
[in]tx_channel

- RF Channel (0-39).

[in]phy

- 0x00 Reserved for future use

  • 0x01 Transmitter set to use the LE 1M PHY

  • 0x02 Transmitter set to use the LE 2M PHY

  • 0x03 Transmitter set to use the LE Coded PHY with S=8 data coding

  • 0x04 Transmitter set to use the LE Coded PHY with S=2 data coding

  • (0x05 - 0xFF) Reserved for future use.

[in]tx_len

- Length in bytes of payload data in each packet ( 1 - 251 bytes).

[in]mode

- 0x00 PRBS9 sequence '11111111100000111101...'

  • 0x01 Repeated '11110000'

  • 0x02 Repeated '10101010'

  • 0x03 PRBS15

  • 0x04 Repeated '11111111'

  • 0x05 Repeated '00000000'

  • 0x06 Repeated '00001111'

  • 0x07 Repeated '01010101'

  • 0x08 - 0xFF Reserved for future use

This is a Blocking API Returns

  • The following values are returned:

    • 0 - Success

    • Non-Zero Value - Failure

Note


Definition at line 2844 of file components/device/silabs/si91x/wireless/ble/inc/rsi_ble_apis.h

rsi_ble_end_test_mode#

int32_t rsi_ble_end_test_mode (uint16_t * num_of_pkts)

Stop the BLE TX / RX test mode in controller.

Parameters
[out]num_of_pkts

- Number of RX packets received are displayed when RX test is stopped

This is a Blocking API Returns

  • The following values are returned:

    • 0 - Success

    • Non-Zero Value - Failure

Note


Definition at line 2858 of file components/device/silabs/si91x/wireless/ble/inc/rsi_ble_apis.h

rsi_ble_per_transmit#

int32_t rsi_ble_per_transmit (struct rsi_ble_per_transmit_s * rsi_ble_per_tx)

Initiate the BLE transmit PER mode in the controller.

Parameters
[in]rsi_ble_per_tx

- This parameter is the buffer to hold the structure values

This is a Blocking API

  • Pre-conditions:

    • Device should be initialized before calling this API.

Returns

  • The following values are returned:

    • 0 - Success

    • Non-Zero Value - Failure

Note


Definition at line 2875 of file components/device/silabs/si91x/wireless/ble/inc/rsi_ble_apis.h

rsi_ble_per_receive#

int32_t rsi_ble_per_receive (struct rsi_ble_per_receive_s * rsi_ble_per_rx)

Initiate the BLE receive PER mode in the controller.

Parameters
[in]rsi_ble_per_rx

- This parameter is the buffer to hold the structure values

This is a Blocking API

  • Pre-conditions:

    • Device should be initialized before calling this API.

Returns

  • The following values are returned:

    • 0 - Success

    • Non-Zero Value - Failure

Note


Definition at line 2892 of file components/device/silabs/si91x/wireless/ble/inc/rsi_ble_apis.h