Join Feature Bitmap#

This section provides a reference to the Si91x join feature bitmap.

Macros#

#define
SL_SI91X_JOIN_FEAT_STA_BG_ONLY_MODE_ENABLE (1 << 0)

To enable b/g only mode in station mode.

#define
SL_SI91X_JOIN_FEAT_LISTEN_INTERVAL_VALID (1 << 1)

To take listen interval from join command.

#define
SL_SI91X_JOIN_FEAT_QUICK_JOIN (1 << 2)

To enable quick join feature.

#define
SL_SI91X_JOIN_FEAT_CCXV2_FEATURE (1 << 3)

To enable CCXV2 feature.

#define
SL_SI91X_JOIN_FEAT_BSSID_BASED (1 << 4)

To connect to AP based on BSSID together with configured SSID.

#define
SL_SI91X_JOIN_FEAT_MFP_CAPABLE_ONLY (1 << 5)

MFP Capable only.

#define
SL_SI91X_JOIN_FEAT_MFP_CAPABLE_REQUIRED ((1 << 5) | (1 << 6))

MFP Capable required.

#define
SL_SI91X_JOIN_FEAT_PS_CMD_LISTEN_INTERVAL_VALID (1 << 7)

Listen interval from power save command.

Macro Definition Documentation#

SL_SI91X_JOIN_FEAT_STA_BG_ONLY_MODE_ENABLE#

#define SL_SI91X_JOIN_FEAT_STA_BG_ONLY_MODE_ENABLE
Value:
(1 << 0)

To enable b/g only mode in station mode.


Definition at line 152 of file components/device/silabs/si91x/wireless/inc/sl_si91x_protocol_types.h

SL_SI91X_JOIN_FEAT_LISTEN_INTERVAL_VALID#

#define SL_SI91X_JOIN_FEAT_LISTEN_INTERVAL_VALID
Value:
(1 << 1)

To take listen interval from join command.


Definition at line 155 of file components/device/silabs/si91x/wireless/inc/sl_si91x_protocol_types.h

SL_SI91X_JOIN_FEAT_QUICK_JOIN#

#define SL_SI91X_JOIN_FEAT_QUICK_JOIN
Value:
(1 << 2)

To enable quick join feature.


Definition at line 158 of file components/device/silabs/si91x/wireless/inc/sl_si91x_protocol_types.h

SL_SI91X_JOIN_FEAT_CCXV2_FEATURE#

#define SL_SI91X_JOIN_FEAT_CCXV2_FEATURE
Value:
(1 << 3)

To enable CCXV2 feature.


Definition at line 161 of file components/device/silabs/si91x/wireless/inc/sl_si91x_protocol_types.h

SL_SI91X_JOIN_FEAT_BSSID_BASED#

#define SL_SI91X_JOIN_FEAT_BSSID_BASED
Value:
(1 << 4)

To connect to AP based on BSSID together with configured SSID.


Definition at line 164 of file components/device/silabs/si91x/wireless/inc/sl_si91x_protocol_types.h

SL_SI91X_JOIN_FEAT_MFP_CAPABLE_ONLY#

#define SL_SI91X_JOIN_FEAT_MFP_CAPABLE_ONLY
Value:
(1 << 5)

MFP Capable only.


Definition at line 167 of file components/device/silabs/si91x/wireless/inc/sl_si91x_protocol_types.h

SL_SI91X_JOIN_FEAT_MFP_CAPABLE_REQUIRED#

#define SL_SI91X_JOIN_FEAT_MFP_CAPABLE_REQUIRED
Value:
((1 << 5) | (1 << 6))

MFP Capable required.


Definition at line 170 of file components/device/silabs/si91x/wireless/inc/sl_si91x_protocol_types.h

SL_SI91X_JOIN_FEAT_PS_CMD_LISTEN_INTERVAL_VALID#

#define SL_SI91X_JOIN_FEAT_PS_CMD_LISTEN_INTERVAL_VALID
Value:
(1 << 7)

Listen interval from power save command.


Definition at line 173 of file components/device/silabs/si91x/wireless/inc/sl_si91x_protocol_types.h