OTA Firmware Client#

Functions#

int32_t

rsi_ota_firmware_upgradation(uint8_t flags, uint8_t *server_ip, uint32_t server_port, uint16_t chunk_number, uint16_t timeout, uint16_t tcp_retry_count, void(*ota_fw_up_response_handler)(uint16_t status, uint16_t chunk_number))

Create an OTAF client. Initialize the client with a given configuration. This is a non-blocking API.

int32_t

rsi_pop3_session_create_async(uint8_t flags, uint8_t *server_ip_address, uint16_t server_port_number, uint8_t auth_type, uint8_t *username, uint8_t *password, void(*rsi_pop3_client_mail_response_handler)(uint16_t status, uint8_t type, const uint8_t *buffer))

Create POP3 client session. This is a non-blocking API.

int32_t

rsi_pop3_session_delete(void)

Delete POP3 client session. This is a non-blocking API.

int32_t

rsi_pop3_get_mail_stats(void)

Get POP3 client mail stats. This is a non-blocking API.

int32_t

rsi_pop3_get_mail_list(uint16_t mail_index)

Get the size of the mail for the passed mail index of the POP2 client. This is a blocking API.

int32_t

rsi_pop3_retrive_mail(uint16_t mail_index)

Retrieve mail content for the passed mail index of POP3 client. This is a non-blocking API.

int32_t

rsi_pop3_mark_mail(uint16_t mail_index)

Mark a mail as deleted for the passed mail index of POP3 client.This is a non-blocking API.

int32_t

rsi_pop3_unmark_mail(void)

Unmark all the marked (deleted) mails of POP3 client in the current session. This is a non-blocking API.

int32_t

rsi_pop3_get_server_status(void)

Get the POP3 server status. This is a non-blocking API.

Function Documentation#

rsi_ota_firmware_upgradation#

int32_t rsi_ota_firmware_upgradation (uint8_t flags, uint8_t * server_ip, uint32_t server_port, uint16_t chunk_number, uint16_t timeout, uint16_t tcp_retry_count, void(*)(uint16_t status, uint16_t chunk_number) ota_fw_up_response_handler, status, chunk_number)

Create an OTAF client. Initialize the client with a given configuration. This is a non-blocking API.

Parameters

[in]	flags	- Select the IP version. BIT(0) – RSI_IPV6: Set this bit to enable IPv6 , by default it is configured to IPv4
[in]	server_ip	- OTAF server IP address
[in]	server_port	- OTAF server port number
[in]	chunk_number	- Firmware content request chunk number
[in]	timeout	- TCP receive packet timeout
[in]	tcp_retry_count	- TCP retransmissions count
[in]	ota_fw_up_response_handler	- Callback when asynchronous response is received from module for firmware update request. Callback parameters: status and chunk_number
[out]	status	- Status code
[out]	chunk_number	- Chunk number of the firmware content

Returns

0 - Success
Negative Value - Failure (Possible Error Codes - 0xfffffffd,0xfffffffa)

Note

Precondition - rsi_config_ipaddress() API needs to be called before this API.
For safe firmware upgrade via TCP server,
it will take approx. 65 sec duration for upgrading the firmware of 1.5 MB file.
Refer to Error Codes for the description of above error codes.

Definition at line 46 of file network/protocols/rsi_ota_fw_up.c

References RSI_SUCCESS , rsi_driver_cb_s::wlan_cb , rsi_check_and_update_cmd_state , rsi_wlan_cb_non_rom_s::nwk_callbacks , and rsi_nwk_callback_s::rsi_ota_fw_up_response_handler

rsi_pop3_session_create_async#

int32_t rsi_pop3_session_create_async (uint8_t flags, uint8_t * server_ip_address, uint16_t server_port_number, uint8_t auth_type, uint8_t * username, uint8_t * password, void(*)(uint16_t status, uint8_t type, const uint8_t *buffer) rsi_pop3_client_mail_response_handler, status, type, buffer)

Create POP3 client session. This is a non-blocking API.

Parameters

[in]	flags	- Select the IP version. BIT(0) – RSI_IPV6: Set this bit to enable IPv6, by default it is configured to IPv4
[in]	server_ip_address	- POP3 server IP address
[in]	server_port_number	- POP3 server TCP port
[in]	auth_type	- Client authentication type
[in]	username	- Username for authentication. It must be a NULL terminated string
[in]	password	- Password for authentication. It must be a NULL terminated string
[in]	rsi_pop3_client_mail_response_handler	- Callback when asynchronous response comes for the session create. The callback parameters are: status,type, and buffer
[out]	status	- Status code
[out]	type	- Sub-command type
[out]	buffer	- Buffer pointer

Returns

0 - Success
Non-Zero Value - Failure (Possible Error Codes - 0xfffffffd,0xfffffffa,0x0021,0x0015,0xBB87,0xFF74)

Note

This API is not supported currently
Precondition - rsi_config_ipaddress() API needs to be called before this API.
Refer to Error Codes for the description of above error codes.

Definition at line 48 of file network/protocols/rsi_pop3_client.c

References RSI_SUCCESS , rsi_driver_cb_s::wlan_cb , rsi_wlan_cb_s::opermode , rsi_wlan_cb_s::state , rsi_check_and_update_cmd_state , rsi_wlan_cb_non_rom_s::nwk_callbacks , and rsi_nwk_callback_s::rsi_pop3_client_mail_response_handler

rsi_pop3_session_delete#

int32_t rsi_pop3_session_delete (void )

Delete POP3 client session. This is a non-blocking API.

Parameters

[in]

Returns

0 - Success
Non-Zero Value - Failure (Possible Error Codes - 0xfffffffd,0xfffffffa,0x0021,0xBB87,0xFF74)

Note

This API is not supported currently
Precondition - rsi_config_ipaddress() API needs to be called before this API.
Refer to Error Codes for the description of above error codes.

Definition at line 169 of file network/protocols/rsi_pop3_client.c

References RSI_SUCCESS , rsi_driver_cb_s::wlan_cb , rsi_wlan_cb_s::opermode , rsi_wlan_cb_s::state , and rsi_check_and_update_cmd_state

rsi_pop3_get_mail_stats#

int32_t rsi_pop3_get_mail_stats (void )

Get POP3 client mail stats. This is a non-blocking API.

Parameters

[in]

Returns

0 - Success
Non-Zero Value - Failure (Possible Error Codes - 0xfffffffd,0xfffffffa,0x0021,0xBB87,0xFF74)

Note

This API is not supported currently
Precondition - rsi_config_ipaddress() API needs to be called before this API.
Refer to Error Codes for the description of above error codes.

Definition at line 243 of file network/protocols/rsi_pop3_client.c

References RSI_SUCCESS , rsi_driver_cb_s::wlan_cb , rsi_wlan_cb_s::opermode , rsi_wlan_cb_s::state , and rsi_check_and_update_cmd_state

rsi_pop3_get_mail_list#

int32_t rsi_pop3_get_mail_list (uint16_t mail_index)

Get the size of the mail for the passed mail index of the POP2 client. This is a blocking API.

Parameters

[in]

mail_index

- Mail index to get the size of the mail

Returns

0 - Success
Non-Zero Value - Failure (Possible Error Codes - 0xfffffffd,0xfffffffa,0x0021,0xBB87,0xBBFF,0xFF74)

Note

This API is not supported currently
Precondition - rsi_config_ipaddress() API needs to be called before this API.
Refer to Error Codes for the description of above error codes.

Definition at line 321 of file network/protocols/rsi_pop3_client.c

References RSI_SUCCESS , rsi_driver_cb_s::wlan_cb , rsi_wlan_cb_s::opermode , rsi_wlan_cb_s::state , and rsi_check_and_update_cmd_state

rsi_pop3_retrive_mail#

int32_t rsi_pop3_retrive_mail (uint16_t mail_index)

Retrieve mail content for the passed mail index of POP3 client. This is a non-blocking API.

Parameters

[in]

mail_index

- Mail index to get the mail content for the passed index

Returns

0 - Success
Non-Zero Value - Failure (Possible Error Codes - 0xfffffffd,0xfffffffa,0x0021,0xBB87,0xBBFF,0xBBC5,0xFF74)

Note

This API is not supported currently
Precondition - rsi_config_ipaddress() API needs to be called before this API.
Refer to Error Codes for the description of above error codes.

Definition at line 412 of file network/protocols/rsi_pop3_client.c

References RSI_SUCCESS , rsi_driver_cb_s::wlan_cb , rsi_wlan_cb_s::opermode , rsi_wlan_cb_s::state , and rsi_check_and_update_cmd_state

rsi_pop3_mark_mail#

int32_t rsi_pop3_mark_mail (uint16_t mail_index)

Mark a mail as deleted for the passed mail index of POP3 client.This is a non-blocking API.

Parameters

[in]

mail_index

- Mail index to mark the mail as deleted

Returns

0 - Success
Non-Zero Value - Failure (Possible Error Codes - 0xfffffffd,0xfffffffa,0x0021,0xBB87,0xBBFF,0xFF74)

Note

This API is not supported currently
Precondition - rsi_config_ipaddress() API needs to be called before this API.
Refer to Error Codes for the description of above error codes.

Definition at line 492 of file network/protocols/rsi_pop3_client.c

References RSI_SUCCESS , rsi_driver_cb_s::wlan_cb , rsi_wlan_cb_s::opermode , rsi_wlan_cb_s::state , and rsi_check_and_update_cmd_state

rsi_pop3_unmark_mail#

int32_t rsi_pop3_unmark_mail (void )

Unmark all the marked (deleted) mails of POP3 client in the current session. This is a non-blocking API.

Parameters

[in]

Returns

0 - Success
Non-Zero Value - Failure (Possible Error Codes - 0xfffffffd,0xfffffffa,0x0021,0xBB87,0xFF74)

Note

This API is not supported currently
Precondition - rsi_config_ipaddress() API needs to be called before this API.
Refer to Error Codes for the description of above error codes.

Definition at line 571 of file network/protocols/rsi_pop3_client.c

References RSI_SUCCESS , rsi_driver_cb_s::wlan_cb , rsi_wlan_cb_s::opermode , rsi_wlan_cb_s::state , and rsi_check_and_update_cmd_state

rsi_pop3_get_server_status#

int32_t rsi_pop3_get_server_status (void )

Get the POP3 server status. This is a non-blocking API.

Parameters

[in]

Returns

0 - Success
Non-Zero Value - Failure (Possible Error Codes - 0xfffffffd,0xfffffffa,0x0021,0xBB87,0xFF74)

Note

This API is not supported currently
Precondition - rsi_config_ipaddress() API needs to be called before this API.
Refer to Error Codes for the description of above error codes.

Definition at line 647 of file network/protocols/rsi_pop3_client.c

References RSI_SUCCESS , rsi_driver_cb_s::wlan_cb , rsi_wlan_cb_s::opermode , rsi_wlan_cb_s::state , and rsi_check_and_update_cmd_state