Wi-Fi#

rsi_wlan_cb_init#

int8_t rsi_wlan_cb_init (rsi_wlan_cb_t * wlan_cb)

Initialize the WLAN control block structure.

Returns

• 0 - Success Non Zero Value - Failure

rsi_driver_wlan_send_cmd#

int32_t rsi_driver_wlan_send_cmd (rsi_wlan_cmd_request_t cmd, rsi_pkt_t * pkt)

Fills command info and places it into wlan TX queue.

Returns

• 0 - Success Non Zero Value - Failure

rsi_extract_filename#

uint8_t * rsi_extract_filename (uint8_t * json, uint8_t * buffer)

Extract filename out of the received json update data.

Returns

• Returns file name extracted

rsi_driver_process_wlan_recv_cmd#

int32_t rsi_driver_process_wlan_recv_cmd (rsi_pkt_t * pkt)

Process WLAN receive commands.

Returns

• 0 - Success Non-Zero Value - Failure

Note

• Memory allocation for the pointer is from receive handler, after process it will be freed.

rsi_check_wlan_state#

uint32_t rsi_check_wlan_state (void )

Get WLAN status.

Returns

• Wlan block status 0 - RSI_WLAN_STATE_NONE 1 - RSI_WLAN_STATE_OPERMODE_DONE 2 - RSI_WLAN_STATE_BAND_DONE 3 - RSI_WLAN_STATE_INIT_DONE 4 - RSI_WLAN_STATE_SCAN_DONE 5 - RSI_WLAN_STATE_CONNECTED 6 - RSI_WLAN_STATE_IP_CONFIG_DONE 7 - RSI_WLAN_STATE_IPV6_CONFIG_DONE 8 - RSI_WLAN_STATE_AUTO_CONFIG_GOING_ON 9 - RSI_WLAN_STATE_AUTO_CONFIG_DONE 10- RSI_WLAN_STATE_AUTO_CONFIG_FAILED

rsi_wlan_set_status#

void rsi_wlan_set_status (int32_t status)

Set the WLAN status.

Returns

• void

rsi_post_waiting_semaphore#

int32_t rsi_post_waiting_semaphore (void )

Post on a waiting semaphore.

Returns

• 0 - Success Non-Zero Value - Failure

rsi_wlan_check_waiting_socket_cmd#

int32_t rsi_wlan_check_waiting_socket_cmd (void )

Check if any socket command is in waiting state.

Returns

• 0 - No socket command is in waiting state 1 - socket command is in waiting state

rsi_wlan_check_waiting_wlan_cmd#

int32_t rsi_wlan_check_waiting_wlan_cmd (void )

Check if any WLAN command is in waiting state.

Returns

• 0 - Success Non-Zero Value - Failure

rsi_wlan_process_raw_data#

void rsi_wlan_process_raw_data (rsi_pkt_t * pkt)

Receive raw data packet from module.

Note

• Memory allocation for the pointer is from receive handler ,after process it will be freed .

Returns

• void

rsi_wlan_packet_transfer_done#

void rsi_wlan_packet_transfer_done (rsi_pkt_t * pkt)

Handle packet transfer completion.

Returns

• void

rsi_check_wlan_buffer_full#

void rsi_check_wlan_buffer_full (rsi_pkt_t * pkt)

Will clear TX packet, if TX buffer is full.

Note

• BUFFER_FULL_HANDLING macro should be enabled.

Returns

• void

rsi_check_common_buffer_full#

void rsi_check_common_buffer_full (rsi_pkt_t * pkt)

Check if the common buffer is full.

Returns

• void

rsi_wait_on_wlan_semaphore#

rsi_error_t rsi_wait_on_wlan_semaphore (rsi_semaphore_handle_t * semaphore, uint32_t timeout_ms)

By wireless library to acquire or wait for wlan semaphore.

Returns

• 0 - Success Negative Value - failure

rsi_update_wlan_cmd_state_to_free_state#

void rsi_update_wlan_cmd_state_to_free_state (void )

By wireless library to update the WLAN command state to free state.

Returns

• void

rsi_update_wlan_cmd_state_to_progress_state#

void rsi_update_wlan_cmd_state_to_progress_state (void )

By wireless library to update the wlan cmd state to progress state.

Returns

• void

rsi_post_waiting_wlan_semaphore#

int32_t rsi_post_waiting_wlan_semaphore (void )

Posts all waiting WLAN semaphores. This API is typically used to reset the semaphore states.

Returns

• 0 - Success Non-Zero Value - Failure

rsi_call_asynchronous_callback#

void rsi_call_asynchronous_callback ()

sort_index_based_on_rssi#

void sort_index_based_on_rssi (struct wpa_scan_results_arr * scan_results_array)

Sort the scan list based on rssi value.

Returns

• void

process_scan_results#

int process_scan_results (uint8_t * buf, uint16_t len, int8_t rssi, uint8_t channel, uint16_t freq)

Process received beacons and probe responses.

Returns

• 0 - Success Non-Zero Value - failure