Embedded MQTT client#

rsi_emb_mqtt_client_init#

int32_t rsi_emb_mqtt_client_init (int8_t * server_ip, uint32_t server_port, uint32_t client_port, uint16_t flags, uint16_t keep_alive_interval, int8_t * clientid, int8_t * username, int8_t * password)

Create MQTT objects. TCP level connection happens in this API. This is a blocking API.

• rsi_config_ipaddress() API needs to be called before this API.

Returns

• 0 - Success
  

• Negative Value - Failure (Possible Error Codes - 0xfffffffe, 0xfffffffd, 0xfffffffc, 0xfffffffb, 0xffffffe0)
  

Note

• RSI_EMB_MQTT_KEEPALIVE_RETRIES - Configures the MQTT Keep-alive retries in case the MQTT Ping response is not received from the MQTT broker within the command acknowledgement time during the MQTT Keep-alive handshake. This is an optional parameter which can be configured in rsi_wlan_config.h. If this is not configured, then its default value is 0. In that case, firmware will not retry MQTT Ping internally and notify the host of MQTT Keepalive timeout.
  

• Precondition - rsi_config_ipaddress() API needs to be called before this API.

• Refer to Error Codes for the description of above error codes.

rsi_emb_mqtt_connect#

int32_t rsi_emb_mqtt_connect (uint8_t mqtt_flags, int8_t * will_topic, uint16_t will_message_len, int8_t * will_message)

Connect to MQTT Server/Broker. MQTT level connection happens in this API. This is a blocking API.

Returns

• 0 - Success
  

• Negative Value - Failure (Possible Error Codes - 0xfffffffd, 0xfffffffc, 0xfffffffb, 0xffffffe0)
  

Note

• Precondition - rsi_emb_mqtt_client_init() API needs to be called before this API.

• will_topic and will_message are not supported and should be NULL.

• For connecting Embedded MQTT over SSL :
  Enable TCP_IP_FEAT_SSL in Opermode parameters as here
  #define RSI_TCP_IP_FEATURE_BIT_MAP (TCP_IP_FEAT_DHCPV4_CLIENT | TCP_IP_FEAT_SSL | TCP_IP_FEAT_DNS_CLIENT).
  Load the related SSL Certificates in the module using rsi_wlan_set_certificate() API.

• Refer to Error Codes for the description of above error codes.
  

rsi_emb_mqtt_publish#

int32_t rsi_emb_mqtt_publish (int8_t * topic, rsi_mqtt_pubmsg_t * publish_msg)

Publish the given message on the topic specified. This is a blocking API.

Returns

• 0 - Success
  

• Negative Value - Failure (Possible Error Codes - 0xfffffffe, 0xfffffffd, 0xfffffffc, 0xfffffffb, 0xffffffe0)
  

Note

• Precondition - rsi_emb_mqtt_connect() API needs to be called before this API.

• Refer to Error Codes for the description of above error codes.

rsi_emb_mqtt_subscribe#

int32_t rsi_emb_mqtt_subscribe (uint8_t qos, int8_t * topic)

Subscribe to the topic specified. Thus, MQTT client will receive any data that is published on this topic. This is a blocking API.

Returns

• 0 - Success
  

• Negative Value - Failure (Possible Error Codes - 0xfffffffe, 0xfffffffd, 0xfffffffc, 0xfffffffb, 0xffffffe0)
  

Note

• Precondition - rsi_emb_mqtt_connect() API needs to be called before this API.

• Refer to Error Codes for the description of above error codes.

rsi_emb_mqtt_unsubscribe#

int32_t rsi_emb_mqtt_unsubscribe (int8_t * topic)

Unsubscribe to the topic specified.Thus, MQTT client will not receive any data published on this topic. This is a blocking API.

Returns

• 0 - Success
  

• Negative Value - Failure (Possible Error Codes - 0xfffffffe, 0xfffffffd, 0xfffffffc, 0xfffffffb, 0xffffffe0)
  

Note

• Precondition - rsi_emb_mqtt_connect() API needs to be called before this API.

• Refer to Error Codes for the description of above error codes.

rsi_emb_mqtt_disconnect#

int32_t rsi_emb_mqtt_disconnect ( Void)

Disconnect the client from MQTT Server/Broker. TCP and MQTT level disconnection take place here. This is a blocking API.

Returns

• 0 - Success
  

• Negative Value - Failure (Possible Error Codes - 0xfffffffd, 0xfffffffc, 0xfffffffb, 0xffffffe0)
  

Note

• Precondition - rsi_emb_mqtt_connect() API needs to be called before this API.

• Refer to Error Codes section for the description of the above error codes Error Codes.

rsi_emb_mqtt_destroy#

int32_t rsi_emb_mqtt_destroy ( Void)

Delete MQTT clients profile configuration. TCP level disconnection happens here, if required. This is a blocking API.

Returns

• 0 - Success
  

• Negative Value - Failure (Possible Error Codes - 0xfffffffd, 0xfffffffc, 0xfffffffb, 0xffffffe0)
  

Note

• Precondition - rsi_emb_mqtt_client_init() API needs to be called before this API, based on requirement.This API can also be issued after rsi_emb_mqtt_disconnect() API.

• Refer to Error Codes for the description of above error codes.

rsi_emb_mqtt_register_call_back#

int32_t rsi_emb_mqtt_register_call_back (uint32_t callback_id, void(*)(uint16_t status, uint8_t *buffer, const uint32_t length) call_back_handler_ptr, status, buffer, length)

Register callbacks for MQTT Asynchronous messages. This is a non-blocking API.

Returns

• Status of the call_back_handler_ptr

Note

• callback_id
  

  ID	Description
  RSI_WLAN_NWK_EMB_MQTT_REMOTE_TERMINATE_CB	If registered, this callback notifies the application of disconnection with the MQTT broker.
  RSI_WLAN_NWK_EMB_MQTT_PUB_MSG_CB	If registered, this callback provides MQTT publish received data to the application.
  RSI_WLAN_NWK_EMB_MQTT_KEEPALIVE_TIMEOUT_CB	If registered, this callback notifies the application of MQTT keepalive response timeout, i.e., ping response is not received within the MQTT Command ACK Timer.

rsi_cal_mqtt_packet_len#

int32_t rsi_cal_mqtt_packet_len (int32_t rem_len)

Calculate length of MQTT packet. This is a non-blocking API.

Returns

• Length of MQTT packet (adjusted rem_len)