NVM3 HAL#

NVM3 Hardware Abstraction Layer.

This module provides the NVM3 interface to the EFM and EFR Flash NVM.

Note

  • The features available through the handle are used by the NVM3 and should not be used directly by any applications.

This module provides the interface to the NVM. By having all NVM access functions in a separate file, it is possible to support different hardware by substituting the functions in this module.

Note

  • These functions are used by the NVM3 and should not be used by any applications.

Modules#

nvm3_HalInfo_t

nvm3_HalHandle_t

Typedefs#

typedef void *
nvm3_HalPtr_t

TYPEDEFS **********************************.

typedef uint8_t
nvm3_HalNvmAccessCode_t

Definition of the access data type.

typedef Ecode_t(*
nvm3_HalOpen_t)(nvm3_HalPtr_t nvmAdr, size_t nvmSize)

PROTOTYPES **********************************.

typedef void(*
nvm3_HalClose_t)(void)

Close the NVM3 HAL for usage.

typedef Ecode_t(*
nvm3_HalGetInfo_t)(nvm3_HalInfo_t *info)

Retrieve device information.

typedef void(*
nvm3_HalNvmAccess_t)(nvm3_HalNvmAccessCode_t access)

Control read and write access to the NVM.

typedef Ecode_t(*
nvm3_HalPageErase_t)(nvm3_HalPtr_t nvmAdr)

Erase a page in the NVM.

typedef Ecode_t(*
nvm3_HalReadWords_t)(nvm3_HalPtr_t nvmAdr, void *dst, size_t wordCnt)

Read data from NVM.

typedef Ecode_t(*
nvm3_HalWriteWords_t)(nvm3_HalPtr_t nvmAdr, void const *pSrc, size_t cnt)

Write data to the NVM.

Variables#

const nvm3_HalHandle_t
nvm3_halFlashHandle

GLOBAL VARIABLES ******************************.

Macros#

#define
NVM3_HAL_WRITE_SIZE_32 0

MACROS **********************************.

#define
NVM3_HAL_WRITE_SIZE_16 1

Two writes are allowed.

#define
NVM3_HAL_NVM_ACCESS_NONE 0

No access.

#define
NVM3_HAL_NVM_ACCESS_RD 1

Read access.

#define
NVM3_HAL_NVM_ACCESS_RDWR 2

Read and write access.

#define
NVM3_HAL_NVM_ACCESS_NOP 3

Ignore.

Typedef Documentation#

nvm3_HalPtr_t#

typedef void* nvm3_HalPtr_t

TYPEDEFS **********************************.

Pointer to NVM


nvm3_HalNvmAccessCode_t#

typedef uint8_t nvm3_HalNvmAccessCode_t

Definition of the access data type.


nvm3_HalOpen_t#

typedef Ecode_t(* nvm3_HalOpen_t) (nvm3_HalPtr_t nvmAdr, size_t nvmSize) )(nvm3_HalPtr_t nvmAdr, size_t nvmSize)

PROTOTYPES **********************************.

Parameters
TypeDirectionArgument NameDescription
[in]nvmAdr

A pointer to the destination in NVM.

[in]nvmSize

The total size of the NVM.

Open the NVM3 HAL for usage.

This function must be run at initialization, before any other functions are called. It is used to call necessary startup routines before the hardware can be accessed.

Returns

  • The result of the open call. ECODE_NVM3_OK on success or a NVM3 Ecode_t on failure.


nvm3_HalClose_t#

typedef void(* nvm3_HalClose_t) (void) )(void)

Close the NVM3 HAL for usage.

This function should be called at program termination. Should be done before any graceful halts.


nvm3_HalGetInfo_t#

typedef Ecode_t(* nvm3_HalGetInfo_t) (nvm3_HalInfo_t *info) )(nvm3_HalInfo_t *info)

Retrieve device information.

Parameters
TypeDirectionArgument NameDescription
[in]info

A pointer to a structure that will receive the device information.

This function is used to retrieve information about the device properties, such as the device family, write size, whether the NVM is memory mapped or not, and finally the NVM page size.


nvm3_HalNvmAccess_t#

typedef void(* nvm3_HalNvmAccess_t) (nvm3_HalNvmAccessCode_t access) )(nvm3_HalNvmAccessCode_t access)

Control read and write access to the NVM.

Parameters
TypeDirectionArgument NameDescription
[in]access

The requested access.

This function is used to control the access to the NVM. It can be either read, write, or none.


nvm3_HalPageErase_t#

typedef Ecode_t(* nvm3_HalPageErase_t) (nvm3_HalPtr_t nvmAdr) )(nvm3_HalPtr_t nvmAdr)

Erase a page in the NVM.

Parameters
TypeDirectionArgument NameDescription
[in]nvmAdr

A memory address pointing to the start of the page to erase.

This function is used to erase an NVM page.

Returns

  • The result of the erase operation.


nvm3_HalReadWords_t#

typedef Ecode_t(* nvm3_HalReadWords_t) (nvm3_HalPtr_t nvmAdr, void *dst, size_t wordCnt) )(nvm3_HalPtr_t nvmAdr, void *dst, size_t wordCnt)

Read data from NVM.

Parameters
TypeDirectionArgument NameDescription
[in]nvmAdr

A memory address in NVM where data will be read.

[in]*dst

A pointer to the destination buffer.

[in]wordCnt

The number of words to read.

This function is used to read data from the NVM. It will be a blocking call, since the thread asking for data to be read cannot continue without the data.


nvm3_HalWriteWords_t#

typedef Ecode_t(* nvm3_HalWriteWords_t) (nvm3_HalPtr_t nvmAdr, void const *pSrc, size_t cnt) )(nvm3_HalPtr_t nvmAdr, void const *pSrc, size_t cnt)

Write data to the NVM.

Parameters
TypeDirectionArgument NameDescription
[in]nvmAdr

A memory address in NVM where data will be written.

[in]*pSrc

A pointer to the source data.

[in]cnt

The number of words to write.

This function is used to write data to the NVM. This is a blocking function.

Returns

  • The result of the write operation. ECODE_NVM3_OK on success or a NVM3 Ecode_t on failure.


Variable Documentation#

nvm3_halFlashHandle#

const nvm3_HalHandle_t nvm3_halFlashHandle

GLOBAL VARIABLES ******************************.

The HAL flash handle.