Asynchronous Client#

rsi_ble_indicate_value_sync#

int32_t rsi_ble_indicate_value_sync (uint8_t * dev_addr, uint16_t handle, uint16_t data_len, uint8_t * p_data)

Indicate the local value to the remote device.

This is a blocking API.

• This will not send any confirmation event to the application instead

• send the status as success on receiving confirmation from remote side.

  • Pre-conditions:

• rsi_ble_connect() API needs to be called before this API. Returns

  • The following values are returned:

• 0 - Success

• Non-Zero Value - Failure

• 0x4D05 - BLE socket not available

• 0x4E60 - Invalid Handle Range

• Note

  • Refer Error Codes section for above error codes error-codes

rsi_ble_indicate_confirm#

int32_t rsi_ble_indicate_confirm (uint8_t * dev_addr)

Send indicate confirmation to the remote device.

This is a blocking API.

• Pre-conditions:

  • rsi_ble_connect() API needs to be called before this API.

Returns

• The following values are returned:

  • 0 - Success

  • Non-Zero Value - Failure 0x4D05 - BLE socket not available

Note

• Refer Error Codes section for above error codes error-codes

rsi_ble_get_profiles_async#

int32_t rsi_ble_get_profiles_async (uint8_t * dev_addr, uint16_t start_handle, uint16_t end_handle, rsi_ble_resp_profiles_list_t * p_prof_list)

Get the supported profiles / services of the connected remote device asynchronously.

rsi_ble_on_event_profiles_list_t callback function will be called after the profiles list event is received. This is a blocking API and can unblock the application on the reception of the callback functions either rsi_ble_on_event_profiles_list_t or rsi_ble_on_gatt_error_resp_t.

• Pre-conditions:

  • rsi_ble_connect() API needs to be called before this API.

Note

• p_prof_list structure should be passed as NULL because nothing will be filled in this structure

Returns

• The following values are returned:

  • 0 - Success

  • Non-Zero Value - Failure

  • 0x4E62 - Invalid Parameters

  • 0x4D04 - BLE not connected

  • 0x4D05 - BLE Socket not available

Note

• Refer Error Codes section for above error codes error-codes .

rsi_ble_get_profile_async#

int32_t rsi_ble_get_profile_async (uint8_t * dev_addr, uuid_t profile_uuid, profile_descriptors_t * p_profile)

Get the specific profile / service of the connected remote device.

rsi_ble_one_event_profile_by_uuid_t callback function is called after the service characteristics response is received. This is a blocking API and can unblock the application on the reception of the callback functions either rsi_ble_one_event_profile_by_uuid_t or rsi_ble_on_gatt_error_resp_t.

• Pre-conditions:

  • rsi_ble_connect() API needs to be called before this API.

Note

• p_profile structure should be passed as NULL because nothing will be filled in this structure

Returns

• The following values are returned:

  • 0 - Success

  • Non-Zero Value - Failure

  • 0x4E62 - Invalid Parameters

  • 0x4D04 - BLE not connected

  • 0x4D05 - BLE Socket not available

Note

• Refer Error Codes section for above error codes error-codes .

rsi_ble_get_char_services_async#

rint32_t rsi_ble_get_char_services_async (uint8_t * dev_addr, uint16_t start_handle, uint16_t end_handle, rsi_ble_resp_char_services_t * p_char_serv_list)

Get the service characteristics of the connected / remote device.

rsi_ble_on_event_read_by_char_services_t callback function is called after the included service characteristics response is received. This is a blocking API and can unblock the application on the reception of the callback functions either rsi_ble_on_event_read_by_char_services_t or rsi_ble_on_gatt_error_resp_t.

• Pre-conditions:

  • rsi_ble_connect() API needs to be called before this API.

Note

• p_char_services_list structure should be passed as NULL because nothing will be filled in this structure

Returns

• The following values are returned:

  • 0 - Success

  • Non-Zero Value - Failure

  • 0x4E60 - Invalid Handle range

  • 0x4E62 - Invalid Parameters

  • 0x4D04 - BLE not connected

  • 0x4D05 - BLE Socket not available

Note

• Refer Error Codes section for above error codes error-codes .

rsi_ble_get_inc_services_async#

int32_t rsi_ble_get_inc_services_async (uint8_t * dev_addr, uint16_t start_handle, uint16_t end_handle, rsi_ble_resp_inc_services_t * p_inc_serv_list)

Get the supported include services of the connected / remote device.

rsi_ble_on_event_read_by_inc_services_t callback function is called after the service characteristics response is received. This is a blocking API and can unblock the application on the reception of the callback functions either rsi_ble_on_event_read_by_inc_services_t or rsi_ble_on_gatt_error_resp_t.

• Pre-conditions:

  • rsi_ble_connect() API needs to be called before this API.

Note

• p_inc_serv_list structure should be passed as NULL because nothing will be filled in this structure

Returns

• The following values are returned:

  • 0 - Success

  • Non-Zero Value - Failure

  • 0x4E60 - Invalid Handle range

  • 0x4E62 - Invalid Parameters

  • 0x4D04 - BLE not connected

  • 0x4D05 - BLE Socket not available

Note

• Refer Error Codes section for above error codes error-codes .

rsi_ble_get_char_value_by_uuid_async#

int32_t rsi_ble_get_char_value_by_uuid_async (uint8_t * dev_addr, uint16_t start_handle, uint16_t end_handle, uuid_t char_uuid, rsi_ble_resp_att_value_t * p_char_val)

Get the characteristic value by UUID (char_uuid).

rsi_ble_on_event_read_att_value_t callback function is called after the attribute value is received. This is a blocking API and can unblock the application on the reception of the callback functions either rsi_ble_on_event_read_att_value_t or rsi_ble_on_gatt_error_resp_t.

• Pre-conditions:

  • rsi_ble_connect() API needs to be called before this API.

Note

• p_char_value structure should be passed as NULL because nothing will be filled in this structure

Returns

• The following values are returned:

  • 0 - Success

  • Non-Zero Value - Failure

  • 0x4E60 - Invalid Handle range

  • 0x4E62 - Invalid Parameters

  • 0x4D04 - BLE not connected

  • 0x4D05 - BLE Socket not available

Note

• Refer Error Codes section for above error codes error-codes .

rsi_ble_get_att_descriptors_async#

int32_t rsi_ble_get_att_descriptors_async (uint8_t * dev_addr, uint16_t start_handle, uint16_t end_handle, rsi_ble_resp_att_descs_t * p_att_desc)

Get the characteristic descriptors list from the remote device.

rsi_ble_on_gatt_desc_val_event_t callback function is called after the attribute descriptors response is received. This is a blocking API and can unblock the application on the reception of the callback functions either rsi_ble_on_gatt_desc_val_event_t or rsi_ble_on_gatt_error_resp_t.

• Pre-conditions:

  • rsi_ble_connect() API needs to be called before this API.

Note

• p_att_desc structure should be passed as NULL because nothing will be filled in this structure

Returns

• The following values are returned:

  • 0 - Success

  • Non-Zero Value - Failure 0x4E60 - Invalid Handle range

  • 0x4E62 - Invalid Parameters

  • 0x4D04 - BLE not connected

  • 0x4D05 - BLE Socket not available

Note

• Refer Error Codes section for above error codes error-codes .

rsi_ble_get_att_value_async#

int32_t rsi_ble_get_att_value_async (uint8_t * dev_addr, uint16_t handle, rsi_ble_resp_att_value_t * p_att_val)

Get the attribute with a handle.

rsi_ble_on_event_read_resp_t callback function is called upon receiving the attribute value. This is a blocking API and can unblock the application on the reception of the callback functions either rsi_ble_on_event_read_resp_t or rsi_ble_on_gatt_error_resp_t.

• Pre-conditions:

  • rsi_ble_connect() API needs to be called before this API.

Note

• p_att_val structure should be passed as NULL because nothing will be filled in this structure

Returns

• The following values are returned:

  • 0 - Success

  • Non-Zero Value - Failure

  • 0x4E60 - Invalid Handle range

  • 0x4E62 - Invalid Parameters

  • 0x4D04 - BLE not connected

  • 0x4D05 - BLE Socket not available

Note

• Refer Error Codes section for above error codes error-codes .

rsi_ble_get_multiple_att_values_async#

int32_t rsi_ble_get_multiple_att_values_async (uint8_t * dev_addr, uint8_t num_of_handlers, uint16_t * handles, rsi_ble_resp_att_value_t * p_att_vals)

Get the multiple attribute values by using multiple handles.

rsi_ble_on_event_read_resp_t callback function is called after the attribute value is received. This is a blocking API and can unblock the application on the reception of the callback functions either rsi_ble_on_event_read_resp_t or rsi_ble_on_gatt_error_resp_t.

• Pre-conditions:

  • rsi_ble_connect() API needs to be called before this API.

Note

• p_att_vals structure should be passed as NULL because nothing will be filled in this structure

Returns

• The following values are returned:

  • 0 - Success

  • 0x4E60 - Invalid Handle range

  • 0x4E62 - Invalid Parameters

  • 0x4D04 - BLE not connected

  • 0x4D05 - BLE Socket not available

Note

• Refer Error Codes section for above error codes error-codes .

rsi_ble_get_long_att_value_async#

int32_t rsi_ble_get_long_att_value_async (uint8_t * dev_addr, uint16_t handle, uint16_t offset, rsi_ble_resp_att_value_t * p_att_vals)

Get the long attribute value by using handle and offset.

rsi_ble_on_event_read_resp_t callback function is called after the attribute value is received. This is a blocking API and can unblock the application on the reception of the callback functions either rsi_ble_on_event_read_resp_t or rsi_ble_on_gatt_error_resp_t.

• Pre-conditions:

  • rsi_ble_connect() API needs to be called before this API.

Note

• p_att_vals structure should be passed as NULL because nothing will be filled in this structure

Returns

• The following values are returned:

  • 0 - Success

  • Non-Zero Value - Failure

  • 0x4E60 - Invalid Handle range

  • 0x4E62 - Invalid Parameters

  • 0x4D04 - BLE not connected

  • 0x4D05 - BLE Socket not available

Note

• Refer Error Codes section for above error codes error-codes .

rsi_ble_set_att_value_async#

int32_t rsi_ble_set_att_value_async (uint8_t * dev_addr, uint16_t handle, uint8_t data_len, uint8_t * p_data)

Set the attribute value of the remote device.

rsi_ble_on_event_write_resp_t callback function is called after the attribute set action is completed. This is a blocking API and can unblock the application on the reception of the callback functions either rsi_ble_on_event_write_resp_t or rsi_ble_on_gatt_error_resp_t.

• Pre-conditions:

  • rsi_ble_connect() API needs to be called before this API.

Returns

• The following values are returned:

  • 0 - Success

  • Non-Zero Value - Failure

  • 0x4E60 - Invalid Handle range

  • 0x4E62 - Invalid Parameters

  • 0x4D04 - BLE not connected

  • 0x4D05 - BLE Socket not available

Note

• Refer Error Codes section for above error codes error-codes .

rsi_ble_prepare_write_async#

int32_t rsi_ble_prepare_write_async (uint8_t * dev_addr, uint16_t handle, uint16_t offset, uint8_t data_len, uint8_t * p_data)

Prepare the attribute value.

rsi_ble_on_event_prepare_write_resp_t callback function is called after the prepare attribute write action is completed. This is a blocking API and can unblock the application on the reception of the callback functions either rsi_ble_on_event_prepare_write_resp_t or rsi_ble_on_gatt_error_resp_t.

• Pre-conditions:

  • rsi_ble_connect() API needs to be called before this API

Returns

• The following values are returned:

  • 0 - Success

  • 0x4E60 - Invalid Handle range

  • 0x4E62 - Invalid Parameters

  • 0x4D04 - BLE not connected

  • 0x4D05 - BLE Socket not available

Note

• Refer Error Codes section for above error codes error-codes .

rsi_ble_execute_write_async#

int32_t rsi_ble_execute_write_async (uint8_t * dev_addr, uint8_t exe_flag)

Execute the prepared attribute values.

rsi_ble_on_event_write_resp_t callback function is called after the execute attribute write action is completed. This is a blocking API and can unblock the application on the reception of the callback functions either rsi_ble_on_event_write_resp_t or rsi_ble_on_gatt_error_resp_t.

• Pre-conditions:

  • rsi_ble_connect() API needs to be called before this API.

Returns

• The following values are returned:

  • 0 - Success

  • Non-Zero Value - Failure

  • 0x4D05 - BLE Socket not available

Note

• Refer Error Codes section for above error codes error-codes .