Callback Declarations#
Typedefs#
When role change status event is received from the module this callback will be called.
When Connect event is raised from the module, this callback will be called. This event will be given by the module when BT PHY Level connection happens from either side.
When unbond event is raised from the module this callback is called . This event will be given by the module when either slave or master device issues unbond command to the other.
When disconnection event is raised from the module this callback will be called . This event will be given by the module when either slave or master device issues disconnect command to the other.
When the single scan response is received from the module in response to inquiry command this callback is called .
When the remote name request command response is received from the module this callback is called.
When the passkey display request is received from the module this callback function is called .
When the remote name request cancels the command response received from the module this callback function is called .
When the user confirmation request is received from the module this callback is called. The user has to give rsi_bt_accept_ssp_confirm or rsi_bt_reject_ssp_confirm command upon reception of this event.
When pincode request is received from the module, this callback is called. User has to give rsi_bt_accept_pincode_request command upon reception of this event.
When the passkey request is received from the module this callback is called. User has to give rsi_bt_passkey command upon reception of this event.
When inquiry complete status is received from the module this callback is called . This event will be given by the module when inquiry command is completely executed.
When authentication complete indication is received from the module this callback is called .
When linkkey request is received from the module this callback is called. User has to give linkkey reply command upon reception of this event.
When SSP complete status is received from the module this callback is called .
When linkkey save is received from the module this callback is called.
When the get services command response is received from the module this callback is called .
When the search service command response is received from the module this calback is called.
When the local device enters / exits the Sniff mode this callback is called.
When AVDTP stats event is receicved from module this callback is called.
When AR stats event is received from module this callback is called.
When HCI packet type change receicved from module this callback is called.
When Sniff subrating is enabled or the parameters are negotiated with the remote device this callback is called .
When the headset initiates the connection this callback is called.
When SPP connected event is raised from the module,this callback will be called . This event will be given by the module when spp profile level connection happens from either side.
When SPP disconnected event is raised from the module,this callback will be called . This event will be given by the module when spp profile level disconnection happens from either side.
When SPP receive event is raised from the module,this callback will be called. This event will be given by the local device when it receives data from the remote device.
When A2DP connected event is raised from the module, this callback will be called. This event will be given by the module when A2DP profile level connection happens from either side.
When A2DP disconnected event is raised from the module, this callback will be called. This event will be given by the module when a2dp profile level disconnection happens from either side.
When A2DP configured event is raised from the module, this callback will be called. This event will be given by the module when a2dp profile onfiguration happens from either side.
When A2DP open event is raised from the module, this callback will be called. This event will be given by the module when a2dp opens in either side.
When A2DP start event is raised from the module, this callback is called. This event will be given by the module when a2dp starts from either side.
When A2DP suspend event is raised from the module, this callback will be called. This event will be given by the module when a2dp suspend happens from either side.
When A2DP abort event is raised from the module, this callback will be called. This event will be given by the module when a2dp abort happens from either side.
When A2DP close event is raised from the module, this callback will be called. This event will be given by the module when a2dp closed from either side.
Callback function to be called if SBC data received from TA.
Callback function to be called if PCM data is received from TA.
Callback function to be called if more data request evenis received.
When A2DP Reconfig event is raised from the module, this callback will be called.
When Avrcp Connect event is raised from the module, this callback will be called. This event will be given by the module when avrcp connection happens from either side.
When Avrcp Disconnect event is raised from the module, this callback will be called. This event will be given by the module when avrcp connection happens from either side.
When Avrcp Play event is raised from the module, this callback will be called. This event will be given by the module when avrcp play button pressed/Released from Control Device.
When Avrcp Pause event is raised from the module, this callback will be called. This event will be given by the module when avrcp pause button pressed/Released from Control Device.
When Avrcp Stop event is raised from the module, this callback will be called. This event will be given by the module when avrcp stop button pressed/Released from Control Device.
When Avrcp next event is raised from the module, this callback will be called. This event will be given by the module when avrcp next button pressed/Released from Control Device.
When Avrcp Previous event is raised from the module, this callback will be called. This event will be given by the module when avrcp Previous button pressed/Released from Control Device.
When Avrcp volume up event is raised from the module, this callback will be called. This event will be given by the module when avrcp volume up button pressed/Released from Control Device.
When Avrcp volume Down event is raised from the module, this callback will be called. This event will be given by the module when avrcp volume Down button pressed/Released from Control Device.
When Remote Devices Element Attributes is received this callback will be called.
Callback function is invoke when avrcp notification received from Control Device.
Callback function is invoke when we receive get capabilities request from remote device.
Callback function is invoke when we receive get application support attribute list request from remote device.
Callback function is invoke when we receive get application support attribute values request from remote device.
Callback function is invoke when we receive get application current attributes value request from remote device.
Callback function is invoke when we receive set application curent attributes value request from remote device.
Callback function is invoke when we receive get application attributes text request from remote device.
Callback function is invoke when we receive get application attribute values text request from remote device.
Callback function is invoke when we receive inform character sets request from remote device.
Callback function is invoke when we receive battery status from remote device.
Callback function is invoke when we receive element/song attribute request from remote device.
Callback function is invoke when we receive player status from remote device.
Callback function is invoke when we receive register notify event from remote device.
Callback function is invoke when we receive set absolute volume event from remote device.
Callback function is invoke when we receive set address player event from remote device.
Callback function is invoke when we receive get folder items event from remote device.
Callback function is invoke when we receive get total number of items event from remote device.
Typedef Documentation#
rsi_bt_on_role_change_t#
void(* rsi_bt_on_role_change_t)(uint16_t resp_status, rsi_bt_event_role_change_t *role_change_status) )(uint16_t resp_status, rsi_bt_event_role_change_t *role_change_status)
When role change status event is received from the module this callback will be called.
| [out] | resp_statuscontains | the role_change_status information , please refer rsi_bt_event_role_change_s structure for more information. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes.
Returns
void
Note
This callback has to be registered using rsi_bt_register_gap_callbacks API
663 of file include/rsi_bt_apis.hrsi_bt_on_connect_t#
void(* rsi_bt_on_connect_t)(uint16_t resp_status, rsi_bt_event_bond_t *bond_response) )(uint16_t resp_status, rsi_bt_event_bond_t *bond_response)
When Connect event is raised from the module, this callback will be called. This event will be given by the module when BT PHY Level connection happens from either side.
| [out] | resp_statuscontains | the connect/bond response information , please refer rsi_bt_event_bond_response_s structure for more information. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_register_gap_callbacks API
677 of file include/rsi_bt_apis.hrsi_bt_on_unbond_t#
void(* rsi_bt_on_unbond_t)(uint16_t resp_status, rsi_bt_event_unbond_t *unbond_status) )(uint16_t resp_status, rsi_bt_event_unbond_t *unbond_status)
When unbond event is raised from the module this callback is called . This event will be given by the module when either slave or master device issues unbond command to the other.
| [out] | resp_statuscontains | the disconnection information , please refer rsi_bt_event_unbond_s structure for more information. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_register_gap_callbacks API
691 of file include/rsi_bt_apis.hrsi_bt_on_disconnect_t#
void(* rsi_bt_on_disconnect_t)(uint16_t resp_status, rsi_bt_event_disconnect_t *bt_disconnect) )(uint16_t resp_status, rsi_bt_event_disconnect_t *bt_disconnect)
When disconnection event is raised from the module this callback will be called . This event will be given by the module when either slave or master device issues disconnect command to the other.
| [out] | resp_statuscontains | the disconnection information , please refer rsi_bt_event_disconnect_s structure for more information. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_register_gap_callbacks API
705 of file include/rsi_bt_apis.hrsi_bt_on_scan_resp_t#
void(* rsi_bt_on_scan_resp_t)(uint16_t resp_status, rsi_bt_event_inquiry_response_t *single_scan_resp) )(uint16_t resp_status, rsi_bt_event_inquiry_response_t *single_scan_resp)
When the single scan response is received from the module in response to inquiry command this callback is called .
| [out] | resp_statuscontains | the inquiry response information , please refer rsi_bt_event_inquiry_response_s structure for more information. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_register_gap_callbacks API
718 of file include/rsi_bt_apis.hrsi_bt_on_remote_name_resp_t#
void(* rsi_bt_on_remote_name_resp_t)(uint16_t resp_status, rsi_bt_event_remote_device_name_t *name_resp) )(uint16_t resp_status, rsi_bt_event_remote_device_name_t *name_resp)
When the remote name request command response is received from the module this callback is called.
| [out] | resp_statuscontains | the remote device name information, please refer rsi_bt_event_remote_device_name_s structure for more information. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_register_gap_callbacks API
731 of file include/rsi_bt_apis.hrsi_bt_on_passkey_display_t#
typedef void(* rsi_bt_on_passkey_display_t)(uint16_t resp_status, rsi_bt_event_user_passkey_display_t *bt_event_user_passkey_display) )(uint16_t resp_status, rsi_bt_event_user_passkey_display_t *bt_event_user_passkey_display)
When the passkey display request is received from the module this callback function is called .
| [out] | resp_statuscontains | the passkey information , please refer rsi_bt_event_user_passkey_display_s structure for more information. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_register_gap_callbacks API
745 of file include/rsi_bt_apis.hrsi_bt_on_remote_name_request_cancel_t#
typedef void(* rsi_bt_on_remote_name_request_cancel_t)(uint16_t resp_status, rsi_bt_event_remote_name_request_cancel_t *remote_name_request_cancel) )(uint16_t resp_status, rsi_bt_event_remote_name_request_cancel_t *remote_name_request_cancel)
When the remote name request cancels the command response received from the module this callback function is called .
| [out] | resp_statuscontains | the response to remote name request cancel cmd , please refer rsi_bt_event_remote_name_request_cancel_s structure for more information. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_register_gap_callbacks API
760 of file include/rsi_bt_apis.hrsi_bt_on_confirm_request_t#
void(* rsi_bt_on_confirm_request_t)(uint16_t resp_status, rsi_bt_event_user_confirmation_request_t *user_confirmation_request) )(uint16_t resp_status, rsi_bt_event_user_confirmation_request_t *user_confirmation_request)
When the user confirmation request is received from the module this callback is called. The user has to give rsi_bt_accept_ssp_confirm or rsi_bt_reject_ssp_confirm command upon reception of this event.
| [out] | resp_statuscontains | the confirmation request information ,please refer rsi_bt_event_user_confirmation_request_s structure for more information . |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_register_gap_callbacks API
778 of file include/rsi_bt_apis.hrsi_bt_on_pincode_request_t#
void(* rsi_bt_on_pincode_request_t)(uint16_t resp_status, rsi_bt_event_user_pincode_request_t *user_pincode_request) )(uint16_t resp_status, rsi_bt_event_user_pincode_request_t *user_pincode_request)
When pincode request is received from the module, this callback is called. User has to give rsi_bt_accept_pincode_request command upon reception of this event.
| [out] | resp_statuscontains | the pincode request information ,please refer rsi_bt_event_user_pincode_request_s structure for more information. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_register_gap_callbacks API
794 of file include/rsi_bt_apis.hrsi_bt_on_passkey_request_t#
void(* rsi_bt_on_passkey_request_t)(uint16_t resp_status, rsi_bt_event_user_passkey_request_t *user_passkey_request) )(uint16_t resp_status, rsi_bt_event_user_passkey_request_t *user_passkey_request)
When the passkey request is received from the module this callback is called. User has to give rsi_bt_passkey command upon reception of this event.
| [out] | resp_statuscontains | the passkey request information ,please refer rsi_bt_event_user_passkey_request_s structure for more information. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_register_gap_callbacks API
810 of file include/rsi_bt_apis.hrsi_bt_on_inquiry_complete_t#
void(* rsi_bt_on_inquiry_complete_t)(uint16_t resp_status) )(uint16_t resp_status)
When inquiry complete status is received from the module this callback is called . This event will be given by the module when inquiry command is completely executed.
| [out] | resp_statuscontains | the response status (Success or Error code) 0 - SUCCESS Non-Zero Value - ErrorCodes |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_register_gap_callbacks API
824 of file include/rsi_bt_apis.hrsi_bt_on_auth_complete_t#
void(* rsi_bt_on_auth_complete_t)(uint16_t resp_status, rsi_bt_event_auth_complete_t *auth_complete) )(uint16_t resp_status, rsi_bt_event_auth_complete_t *auth_complete)
When authentication complete indication is received from the module this callback is called .
| [out] | resp_statuscontains | the authentication complete information , please refer rsi_bt_event_auth_complete_s structure for more information. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_register_gap_callbacks API
837 of file include/rsi_bt_apis.hrsi_bt_on_linkkey_request_t#
void(* rsi_bt_on_linkkey_request_t)(uint16_t resp_status, rsi_bt_event_user_linkkey_request_t *user_linkkey_request) )(uint16_t resp_status, rsi_bt_event_user_linkkey_request_t *user_linkkey_request)
When linkkey request is received from the module this callback is called. User has to give linkkey reply command upon reception of this event.
| [out] | resp_statuscontains | the linkkey request information , please refer rsi_bt_event_user_linkkey_request_s structure for mre information . |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_register_gap_callbacks API
852 of file include/rsi_bt_apis.hrsi_bt_on_ssp_complete_t#
void(* rsi_bt_on_ssp_complete_t)(uint16_t resp_status, rsi_bt_event_ssp_complete_t *ssp_complete) )(uint16_t resp_status, rsi_bt_event_ssp_complete_t *ssp_complete)
When SSP complete status is received from the module this callback is called .
| [out] | resp_statuscontains | the ssp complete status, please refer rsi_bt_event_ssp_complete_s structure for more information . |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_register_gap_callbacks API
866 of file include/rsi_bt_apis.hrsi_bt_on_linkkey_save_t#
void(* rsi_bt_on_linkkey_save_t)(uint16_t resp_status, rsi_bt_event_user_linkkey_save_t *user_linkkey_save) )(uint16_t resp_status, rsi_bt_event_user_linkkey_save_t *user_linkkey_save)
When linkkey save is received from the module this callback is called.
| [out] | resp_statuscontains | the linkkey save information , plesae refer rsi_bt_event_user_linkkey_save_s structure for more information. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_register_gap_callbacks API
879 of file include/rsi_bt_apis.hrsi_bt_on_get_services_t#
void(* rsi_bt_on_get_services_t)(uint16_t resp_status, rsi_bt_resp_query_services_t *service_list) )(uint16_t resp_status, rsi_bt_resp_query_services_t *service_list)
When the get services command response is received from the module this callback is called .
| [out] | resp_statuscontains | the response information to get services cmd ,please refer rsi_bt_resp_query_services_s structure for more information. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback is Reserved for Future.
This callback has to be registered using rsi_bt_register_gap_callbacks API
893 of file include/rsi_bt_apis.hrsi_bt_on_search_service_t#
void(* rsi_bt_on_search_service_t)(uint16_t resp_status, uint8_t *status) )(uint16_t resp_status, uint8_t *status)
When the search service command response is received from the module this calback is called.
| [out] | resp_statuscontains | the status response to search service cmd. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback is Reserved for Future.
This callback has to be registered using rsi_bt_register_gap_callbacks API
907 of file include/rsi_bt_apis.hrsi_bt_on_mode_chnage_t#
void(* rsi_bt_on_mode_chnage_t)(uint16_t resp_status, rsi_bt_event_mode_change_t *mode_change) )(uint16_t resp_status, rsi_bt_event_mode_change_t *mode_change)
When the local device enters / exits the Sniff mode this callback is called.
| [out] | resp_statuscontains | the response payload for the mode change response , please refer rsi_bt_event_mode_change_s structure for more information . |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_register_gap_callbacks API
920 of file include/rsi_bt_apis.hrsi_bt_on_avdtp_stats_t#
void(* rsi_bt_on_avdtp_stats_t)(uint16_t resp_status, rsi_bt_event_avdtp_stats_t *avdtp_event) )(uint16_t resp_status, rsi_bt_event_avdtp_stats_t *avdtp_event)
When AVDTP stats event is receicved from module this callback is called.
| [out] | resp_statuscontains | the response status (Success or Error code) 0 - SUCCESS Non-Zero Value - ErrorCodes |
| [out] | avdtp_eventcontains | the avdtp stats parameters , please refer rsi_bt_event_avdtp_stats_s structure for more information . |
Returns
void
Note
This callback has to be registered using rsi_bt_avdtp_events_register_callbacks API
932 of file include/rsi_bt_apis.hrsi_bt_on_ar_stats_t#
void(* rsi_bt_on_ar_stats_t)(uint16_t resp_status, rsi_bt_event_ar_stats_t *ar_event) )(uint16_t resp_status, rsi_bt_event_ar_stats_t *ar_event)
When AR stats event is received from module this callback is called.
| [out] | resp_statuscontains | the response status (Success or Error code) 0 - SUCCESS Non-Zero Value - ErrorCodes |
| [out] | ar_eventcontains | the ar stats parameters , please refer rsi_bt_event_ar_stats_s structure for more information. |
Returns
void
Note
This callback has to be registered using rsi_bt_ar_events_register_callbacks API
944 of file include/rsi_bt_apis.hrsi_bt_pkt_change_stats_t#
void(* rsi_bt_pkt_change_stats_t)(uint16_t resp_status, rsi_bt_event_pkt_change_t *bt_pkt_change_stats) )(uint16_t resp_status, rsi_bt_event_pkt_change_t *bt_pkt_change_stats)
When HCI packet type change receicved from module this callback is called.
| [out] | resp_statuscontains | the response status (Success or Error code) 0 - SUCCESS Non-Zero Value - ErrorCodes |
| [out] | avdtp_eventcontains | the packet type , please refer rsi_bt_event_pkt_change_s structure for more information. |
Returns
void
Note
This callback has to be registered using rsi_bt_pkt_change_events_register_callbacks API
957 of file include/rsi_bt_apis.hrsi_bt_on_sniff_subrating_t#
void(* rsi_bt_on_sniff_subrating_t)(uint16_t resp_status, rsi_bt_event_sniff_subrating_t *mode_change) )(uint16_t resp_status, rsi_bt_event_sniff_subrating_t *mode_change)
When Sniff subrating is enabled or the parameters are negotiated with the remote device this callback is called .
| [out] | resp_statuscontains | parameters related to sniff subrating , please refer rsi_bt_event_sniff_subrating_s structure for more information. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_register_gap_callbacks API
970 of file include/rsi_bt_apis.hrsi_bt_on_connection_initiated_t#
void(* rsi_bt_on_connection_initiated_t)(uint16_t resp_status, rsi_bt_event_connection_initiated_t *mode_change) )(uint16_t resp_status, rsi_bt_event_connection_initiated_t *mode_change)
When the headset initiates the connection this callback is called.
| [out] | resp_statuscontains | the value is 1 implies connection initiated by remote device , please refer rsi_bt_event_connection_initiated_s structure for more information. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_register_gap_callbacks API
983 of file include/rsi_bt_apis.hrsi_bt_on_spp_connect_t#
void(* rsi_bt_on_spp_connect_t)(uint16_t resp_status, rsi_bt_event_spp_connect_t *spp_connect) )(uint16_t resp_status, rsi_bt_event_spp_connect_t *spp_connect)
When SPP connected event is raised from the module,this callback will be called . This event will be given by the module when spp profile level connection happens from either side.
| [out] | resp_statuscontains | the spp connect information, please refer rsi_bt_event_spp_connect_s for more information. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_spp_register_callbacks API
1045 of file include/rsi_bt_apis.hrsi_bt_on_spp_disconnect_t#
void(* rsi_bt_on_spp_disconnect_t)(uint16_t resp_status, rsi_bt_event_spp_disconnect_t *spp_disconnect) )(uint16_t resp_status, rsi_bt_event_spp_disconnect_t *spp_disconnect)
When SPP disconnected event is raised from the module,this callback will be called . This event will be given by the module when spp profile level disconnection happens from either side.
| [out] | resp_statuscontains | the spp disconnect information, please refer rsi_bt_event_spp_disconnect_s structure for more information. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_spp_register_callbacks API.
1059 of file include/rsi_bt_apis.hrsi_bt_on_spp_rx_data_t#
void(* rsi_bt_on_spp_rx_data_t)(uint16_t resp_status, rsi_bt_event_spp_receive_t *bt_event_spp_receive) )(uint16_t resp_status, rsi_bt_event_spp_receive_t *bt_event_spp_receive)
When SPP receive event is raised from the module,this callback will be called. This event will be given by the local device when it receives data from the remote device.
| [out] | resp_statuscontains | the spp rcvd data information, please refer rsi_bt_event_spp_receive_s structure for more information. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes
Returns
void
Note
This callback has to be registered using rsi_bt_spp_register_callbacks API
1073 of file include/rsi_bt_apis.hrsi_bt_on_a2dp_connect_t#
void(* rsi_bt_on_a2dp_connect_t)(uint16_t resp_status, rsi_bt_event_a2dp_connect_t *a2dp_connect) )(uint16_t resp_status, rsi_bt_event_a2dp_connect_t *a2dp_connect)
When A2DP connected event is raised from the module, this callback will be called. This event will be given by the module when A2DP profile level connection happens from either side.
| [out] | resp_statuscontains | the a2dp connect information, please refer rsi_bt_event_a2dp_connect_s structure for more info. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_a2dp_register_callbacks API
1636 of file include/rsi_bt_apis.hrsi_bt_on_a2dp_disconnect_t#
void(* rsi_bt_on_a2dp_disconnect_t)(uint16_t resp_status, rsi_bt_event_a2dp_disconnect_t *a2dp_disconnect) )(uint16_t resp_status, rsi_bt_event_a2dp_disconnect_t *a2dp_disconnect)
When A2DP disconnected event is raised from the module, this callback will be called. This event will be given by the module when a2dp profile level disconnection happens from either side.
| [out] | resp_statuscontains | the a2dp disconnect information, please refer rsi_bt_event_a2dp_disconnect_s structure for more info. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_a2dp_register_callbacks API
1651 of file include/rsi_bt_apis.hrsi_bt_on_a2dp_configure_t#
void(* rsi_bt_on_a2dp_configure_t)(uint16_t resp_status, rsi_bt_event_a2dp_configure_t *a2dp_configure) )(uint16_t resp_status, rsi_bt_event_a2dp_configure_t *a2dp_configure)
When A2DP configured event is raised from the module, this callback will be called. This event will be given by the module when a2dp profile onfiguration happens from either side.
| [out] | resp_statuscontains | the a2dp configure information, please refer rsi_bt_event_a2dp_configure_s structure for more info. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_a2dp_register_callbacks API
1666 of file include/rsi_bt_apis.hrsi_bt_on_a2dp_open_t#
void(* rsi_bt_on_a2dp_open_t)(uint16_t resp_status, rsi_bt_event_a2dp_open_t *a2dp_open) )(uint16_t resp_status, rsi_bt_event_a2dp_open_t *a2dp_open)
When A2DP open event is raised from the module, this callback will be called. This event will be given by the module when a2dp opens in either side.
| [out] | resp_statuscontains | the a2dp open information, please refer rsi_bt_event_a2dp_open_s structure for more info. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_a2dp_register_callbacks API
1681 of file include/rsi_bt_apis.hrsi_bt_on_a2dp_start_t#
void(* rsi_bt_on_a2dp_start_t)(uint16_t resp_status, rsi_bt_event_a2dp_start_t *a2dp_start) )(uint16_t resp_status, rsi_bt_event_a2dp_start_t *a2dp_start)
When A2DP start event is raised from the module, this callback is called. This event will be given by the module when a2dp starts from either side.
| [out] | resp_statuscontains | the a2dp start information, please refer rsi_bt_event_a2dp_start_s structure for more info. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_a2dp_register_callbacks API
1696 of file include/rsi_bt_apis.hrsi_bt_on_a2dp_suspend_t#
void(* rsi_bt_on_a2dp_suspend_t)(uint16_t resp_status, rsi_bt_event_a2dp_suspend_t *a2dp_suspend) )(uint16_t resp_status, rsi_bt_event_a2dp_suspend_t *a2dp_suspend)
When A2DP suspend event is raised from the module, this callback will be called. This event will be given by the module when a2dp suspend happens from either side.
| [out] | resp_statuscontains | suspend, contains the a2dp suspend information, please refer rsi_bt_event_a2dp_suspend_s structure for more info. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_a2dp_register_callbacks API
1711 of file include/rsi_bt_apis.hrsi_bt_on_a2dp_abort_t#
void(* rsi_bt_on_a2dp_abort_t)(uint16_t resp_status, rsi_bt_event_a2dp_abort_t *a2dp_abort) )(uint16_t resp_status, rsi_bt_event_a2dp_abort_t *a2dp_abort)
When A2DP abort event is raised from the module, this callback will be called. This event will be given by the module when a2dp abort happens from either side.
| [out] | resp_statuscontains | the a2dp abort information, please refer rsi_bt_event_a2dp_abort_s structure for more info. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_a2dp_register_callbacks API
1726 of file include/rsi_bt_apis.hrsi_bt_on_a2dp_close_t#
void(* rsi_bt_on_a2dp_close_t)(uint16_t resp_status, rsi_bt_event_a2dp_close_t *a2dp_close) )(uint16_t resp_status, rsi_bt_event_a2dp_close_t *a2dp_close)
When A2DP close event is raised from the module, this callback will be called. This event will be given by the module when a2dp closed from either side.
| [out] | resp_statuscontains | the a2dp close information, please refer rsi_bt_event_a2dp_close_s structure for more info. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_a2dp_register_callbacks API
1741 of file include/rsi_bt_apis.hrsi_bt_on_a2dp_encode_data_t#
void(* rsi_bt_on_a2dp_encode_data_t)(uint16_t resp_status, rsi_bt_event_a2dp_encode_data_t *a2dp_encode_data) )(uint16_t resp_status, rsi_bt_event_a2dp_encode_data_t *a2dp_encode_data)
Callback function to be called if SBC data received from TA.
| [out] | resp_statuscontains | the SBC encoded packet information, please refer rsi_bt_event_a2dp_encode_data_s structure for more info. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_a2dp_register_callbacks API
1755 of file include/rsi_bt_apis.hrsi_bt_on_a2dp_pcm_data_t#
void(* rsi_bt_on_a2dp_pcm_data_t)(uint16_t resp_status, rsi_bt_event_a2dp_pcm_data_t *a2dp_pcm_data) )(uint16_t resp_status, rsi_bt_event_a2dp_pcm_data_t *a2dp_pcm_data)
Callback function to be called if PCM data is received from TA.
| [out] | resp_statuscontains | the PCM audio data information |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_a2dp_register_callbacks API
1768 of file include/rsi_bt_apis.hrsi_bt_on_a2dp_data_req_t#
void(* rsi_bt_on_a2dp_data_req_t)(uint16_t resp_status, rsi_bt_event_a2dp_more_data_req_t *a2dp_more_data_req) )(uint16_t resp_status, rsi_bt_event_a2dp_more_data_req_t *a2dp_more_data_req)
Callback function to be called if more data request evenis received.
| [out] | resp_statuscontains | the a2dp_more_data_req information |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_a2dp_register_callbacks API
1781 of file include/rsi_bt_apis.hrsi_bt_on_a2dp_reconfig_t#
void(* rsi_bt_on_a2dp_reconfig_t)(uint16_t resp_status, rsi_bt_event_a2dp_reconfig_t *a2dp_reconfig) )(uint16_t resp_status, rsi_bt_event_a2dp_reconfig_t *a2dp_reconfig)
When A2DP Reconfig event is raised from the module, this callback will be called.
| [out] | resp_statuscontains | the a2dp reconfig information, please refer rsi_bt_event_a2dp_reconfig_s structure for more info |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_a2dp_register_callbacks API
1794 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_connect_t#
void(* rsi_bt_on_avrcp_connect_t)(uint16_t resp_status, rsi_bt_event_avrcp_connect_t *bt_event_avrcp_connect) )(uint16_t resp_status, rsi_bt_event_avrcp_connect_t *bt_event_avrcp_connect)
When Avrcp Connect event is raised from the module, this callback will be called. This event will be given by the module when avrcp connection happens from either side.
| [out] | resp_statuscontains | the avrcp connected information, please refer rsi_bt_event_avrcp_connect_s structure for more info. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_register_callbacks API
2061 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_disconnect_t#
void(* rsi_bt_on_avrcp_disconnect_t)(uint16_t resp_status, rsi_bt_event_avrcp_disconnect_t *bt_event_avrcp_disconnect) )(uint16_t resp_status, rsi_bt_event_avrcp_disconnect_t *bt_event_avrcp_disconnect)
When Avrcp Disconnect event is raised from the module, this callback will be called. This event will be given by the module when avrcp connection happens from either side.
| [out] | resp_statuscontains | the avrcp disconnected information, please refer rsi_bt_event_avrcp_disconnect_s structure for more info. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_register_callbacks API
2077 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_play_t#
void(* rsi_bt_on_avrcp_play_t)(uint16_t resp_status, rsi_bt_event_avrcp_play_t *bt_event_avrcp_play) )(uint16_t resp_status, rsi_bt_event_avrcp_play_t *bt_event_avrcp_play)
When Avrcp Play event is raised from the module, this callback will be called. This event will be given by the module when avrcp play button pressed/Released from Control Device.
| [out] | resp_statuscontains | the avrcp play information, please refer rsi_bt_event_avrcp_play_s structure for more info. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_register_callbacks API
2093 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_pause_t#
void(* rsi_bt_on_avrcp_pause_t)(uint16_t resp_status, rsi_bt_event_avrcp_pause_t *bt_event_avrcp_pause) )(uint16_t resp_status, rsi_bt_event_avrcp_pause_t *bt_event_avrcp_pause)
When Avrcp Pause event is raised from the module, this callback will be called. This event will be given by the module when avrcp pause button pressed/Released from Control Device.
| [out] | resp_statuscontains | the avrcp pause information, please refer rsi_bt_event_avrcp_pause_s structure for more info. |
Note
Refer Bluetooth Generic Error Codes section upto 0x4FF8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_register_callbacks API
2108 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_stop_t#
void(* rsi_bt_on_avrcp_stop_t)(uint16_t resp_status, rsi_bt_event_avrcp_stop_t *bt_event_avrcp_stop) )(uint16_t resp_status, rsi_bt_event_avrcp_stop_t *bt_event_avrcp_stop)
When Avrcp Stop event is raised from the module, this callback will be called. This event will be given by the module when avrcp stop button pressed/Released from Control Device.
| [out] | resp_statuscontains | the avrcp pause information, please refer rsi_bt_event_avrcp_stop_s structure for more info. |
Note
refer bluetooth generic error codes section upto 0x4ff8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_register_callbacks API
2123 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_next_t#
void(* rsi_bt_on_avrcp_next_t)(uint16_t resp_status, rsi_bt_event_avrcp_next_t *bt_event_avrcp_next) )(uint16_t resp_status, rsi_bt_event_avrcp_next_t *bt_event_avrcp_next)
When Avrcp next event is raised from the module, this callback will be called. This event will be given by the module when avrcp next button pressed/Released from Control Device.
| [out] | resp_statuscontains | the avrcp next information, please refer rsi_bt_event_avrcp_next_s structure for more info. |
Note
refer bluetooth generic error codes section upto 0x4ff8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_register_callbacks API
2138 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_previous_t#
void(* rsi_bt_on_avrcp_previous_t)(uint16_t resp_status, rsi_bt_event_avrcp_previous_t *bt_event_avrcp_previous) )(uint16_t resp_status, rsi_bt_event_avrcp_previous_t *bt_event_avrcp_previous)
When Avrcp Previous event is raised from the module, this callback will be called. This event will be given by the module when avrcp Previous button pressed/Released from Control Device.
| [out] | resp_statuscontains | the avrcp previous information, please refer rsi_bt_event_avrcp_previous_s structure for more info. |
Note
refer bluetooth generic error codes section upto 0x4ff8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_register_callbacks API
2154 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_vol_up_t#
void(* rsi_bt_on_avrcp_vol_up_t)(uint16_t resp_status, rsi_bt_event_avrcp_vol_up_t *bt_event_avrcp_vol_up) )(uint16_t resp_status, rsi_bt_event_avrcp_vol_up_t *bt_event_avrcp_vol_up)
When Avrcp volume up event is raised from the module, this callback will be called. This event will be given by the module when avrcp volume up button pressed/Released from Control Device.
| [out] | resp_statuscontains | avrcp vol up info, please refer rsi_bt_event_avrcp_vol_up_s structure for more info. |
Note
refer bluetooth generic error codes section upto 0x4ff8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_register_callbacks API
2170 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_vol_down_t#
void(* rsi_bt_on_avrcp_vol_down_t)(uint16_t resp_status, rsi_bt_event_avrcp_vol_down_t *bt_event_avrcp_vol_down) )(uint16_t resp_status, rsi_bt_event_avrcp_vol_down_t *bt_event_avrcp_vol_down)
When Avrcp volume Down event is raised from the module, this callback will be called. This event will be given by the module when avrcp volume Down button pressed/Released from Control Device.
| [out] | resp_statuscontains | the avrcp vol down info, please refer rsi_bt_event_avrcp_vol_down_s structure for more info. |
Note
refer bluetooth generic error codes section upto 0x4ff8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_register_callbacks API
2186 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_get_elem_attr_resp_t#
void(* rsi_bt_on_avrcp_get_elem_attr_resp_t)(uint16_t resp_status, rsi_bt_event_avrcp_get_elem_attr_resp_t *avrcp_get_elem_attr_resp) )(uint16_t resp_status, rsi_bt_event_avrcp_get_elem_attr_resp_t *avrcp_get_elem_attr_resp)
When Remote Devices Element Attributes is received this callback will be called.
| [out] | resp_statuscontains | the avrcp get elem attr resp info. |
Note
refer bluetooth generic error codes section upto 0x4ff8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_register_callbacks API
2201 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_notify_event_t#
void(* rsi_bt_on_avrcp_notify_event_t)(uint16_t resp_status, rsi_bt_event_avrcp_notify_t *bt_event_avrcp_notify) )(uint16_t resp_status, rsi_bt_event_avrcp_notify_t *bt_event_avrcp_notify)
Callback function is invoke when avrcp notification received from Control Device.
| [out] | resp_statuscontains | the avrcp registered notifications information, please refer rsi_bt_event_avrcp_notify_s structure for more info. |
Note
refer bluetooth generic error codes section upto 0x4ff8 from Error Codes .
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_register_callbacks API
2217 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_get_cap_event_t#
void(* rsi_bt_on_avrcp_get_cap_event_t)(uint8_t *bd_addr, uint8_t cap_type) )(uint8_t *bd_addr, uint8_t cap_type)
Callback function is invoke when we receive get capabilities request from remote device.
| [out] | bd_addrRemote | bd address. |
| [out] | cap_typeavrcp | capabilities type. |
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_target_register_callbacks API
2404 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_get_app_supp_atts_event_t#
void(* rsi_bt_on_avrcp_get_app_supp_atts_event_t)(uint8_t *bd_addr) )(uint8_t *bd_addr)
Callback function is invoke when we receive get application support attribute list request from remote device.
| [out] | bd_addrRemote | bd address. |
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_target_register_callbacks API
2413 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_get_app_suup_att_vals_event_t#
void(* rsi_bt_on_avrcp_get_app_suup_att_vals_event_t)(uint8_t *bd_addr, uint8_t att_id) )(uint8_t *bd_addr, uint8_t att_id)
Callback function is invoke when we receive get application support attribute values request from remote device.
| [out] | bd_addrRemote | bd address. |
| [out] | att_idapplication | attribute id. |
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_target_register_callbacks API
2423 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_get_app_cur_att_val_event_t#
void(* rsi_bt_on_avrcp_get_app_cur_att_val_event_t)(rsi_bt_event_avrcp_get_cur_att_val_t *p_att_list) )(rsi_bt_event_avrcp_get_cur_att_val_t *p_att_list)
Callback function is invoke when we receive get application current attributes value request from remote device.
| [out] | p_att_listattribute | list, please refer rsi_bt_event_avrcp_get_cur_att_val_s structure for more info. |
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_target_register_callbacks API
2433 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_set_app_cur_att_val_event_t#
void(* rsi_bt_on_avrcp_set_app_cur_att_val_event_t)(rsi_bt_event_avrcp_set_att_val_t *p_att_list) )(rsi_bt_event_avrcp_set_att_val_t *p_att_list)
Callback function is invoke when we receive set application curent attributes value request from remote device.
| [out] | p_att_listattribute | list, please refer rsi_bt_event_avrcp_set_att_val_s structure for more info. |
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_target_register_callbacks API
2443 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_get_app_att_text_event_t#
void(* rsi_bt_on_avrcp_get_app_att_text_event_t)(rsi_bt_event_avrcp_get_cur_att_val_t *p_att_list) )(rsi_bt_event_avrcp_get_cur_att_val_t *p_att_list)
Callback function is invoke when we receive get application attributes text request from remote device.
| [out] | p_att_listattribute | list, please refer rsi_bt_event_avrcp_get_cur_att_val_s structure for more info. |
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_target_register_callbacks API
2453 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_get_app_att_vals_text_event_t#
void(* rsi_bt_on_avrcp_get_app_att_vals_text_event_t)(rsi_bt_event_avrcp_vals_text_req_t *p_vals_list) )(rsi_bt_event_avrcp_vals_text_req_t *p_vals_list)
Callback function is invoke when we receive get application attribute values text request from remote device.
| [out] | p_vals_listattribute | values list, please refer rsi_bt_event_avrcp_vals_text_req_s structure for more info. |
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_target_register_callbacks API
2463 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_supp_char_sets_event_t#
void(* rsi_bt_on_avrcp_supp_char_sets_event_t)(rsi_bt_event_avrcp_char_sets_t *p_char_sets) )(rsi_bt_event_avrcp_char_sets_t *p_char_sets)
Callback function is invoke when we receive inform character sets request from remote device.
| [out] | p_char_setssupport | character sets list, please refer rsi_bt_event_avrcp_char_sets_s structure for more info. |
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_target_register_callbacks API
2473 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_batt_status_event_t#
void(* rsi_bt_on_avrcp_batt_status_event_t)(uint8_t *bd_addr, uint8_t batt_status) )(uint8_t *bd_addr, uint8_t batt_status)
Callback function is invoke when we receive battery status from remote device.
| [out] | bd_addrRemote | bd address. |
| [out] | batt_statusbattery | status. |
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_target_register_callbacks API
2483 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_get_song_atts_event_t#
void(* rsi_bt_on_avrcp_get_song_atts_event_t)(rsi_bt_event_avrcp_ele_att_t *p_song_atts) )(rsi_bt_event_avrcp_ele_att_t *p_song_atts)
Callback function is invoke when we receive element/song attribute request from remote device.
| [out] | p_song_attsrequested | song attribute list, please refer rsi_bt_event_avrcp_ele_att_s structure for more info. |
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_target_register_callbacks API
2493 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_get_play_status_event_t#
void(* rsi_bt_on_avrcp_get_play_status_event_t)(uint8_t *bd_addr) )(uint8_t *bd_addr)
Callback function is invoke when we receive player status from remote device.
| [out] | bd_addrRemote | bd address. |
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_target_register_callbacks API
2502 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_reg_notify_event_t#
void(* rsi_bt_on_avrcp_reg_notify_event_t)(uint8_t *bd_addr, uint8_t event_id) )(uint8_t *bd_addr, uint8_t event_id)
Callback function is invoke when we receive register notify event from remote device.
| [out] | bd_addrRemote | bd address. |
| [out] | event_idEvent | for which the Control Device requires notifications |
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_target_register_callbacks API
2512 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_set_abs_vol_event_t#
void(* rsi_bt_on_avrcp_set_abs_vol_event_t)(rsi_bt_event_avrcp_set_abs_vol_t *p_abs_vol) )(rsi_bt_event_avrcp_set_abs_vol_t *p_abs_vol)
Callback function is invoke when we receive set absolute volume event from remote device.
| [out] | bd_addrRemote | bd address. |
| [out] | p_abs_volavrcp | absolute vol, please refer rsi_bt_event_avrcp_set_abs_vol_s structure for more info. |
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_target_register_callbacks API
2523 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_set_addr_player_event_t#
void(* rsi_bt_on_avrcp_set_addr_player_event_t)(rsi_bt_event_avrcp_set_addr_player_t *p_set_addr_player) )(rsi_bt_event_avrcp_set_addr_player_t *p_set_addr_player)
Callback function is invoke when we receive set address player event from remote device.
| [out] | bd_addrRemote | bd address. |
| [out] | p_set_addr_playerinform | the Target Device of which media player the Control Device wishes to control, please refer rsi_bt_event_avrcp_set_addr_player_s structure for more info. |
Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_target_register_callbacks API
2534 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_get_folder_items_event_t#
typedef void(* rsi_bt_on_avrcp_get_folder_items_event_t) (rsi_bt_event_avrcp_get_folder_items_t *p_get_folder_items) )(rsi_bt_event_avrcp_get_folder_items_t *p_get_folder_items)
Callback function is invoke when we receive get folder items event from remote device.
| [out] | bd_addrRemote | bd address. |
| [out] | p_get_folder_itemsto | get the media player items list in a folder, please refer rsi_bt_event_avrcp_get_folder_items_s structure for more info. |
@callback rsi_bt_on_avrcp_get_folder_items_event_t Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_target_register_callbacks API
2545 of file include/rsi_bt_apis.hrsi_bt_on_avrcp_get_tot_num_items_event_t#
typedef void(* rsi_bt_on_avrcp_get_tot_num_items_event_t) (rsi_bt_event_avrcp_get_tot_num_items_t *p_get_tot_num_items) )(rsi_bt_event_avrcp_get_tot_num_items_t *p_get_tot_num_items)
Callback function is invoke when we receive get total number of items event from remote device.
| [out] | bd_addrRemote | bd address. |
| [out] | p_get_tot_num_itemstotal | number of items present in a folder, please refer rsi_bt_event_avrcp_get_tot_num_items_s structure for more info. |
@callback rsi_bt_on_avrcp_get_tot_num_items_event_t Returns
void
Note
This callback has to be registered using rsi_bt_avrcp_target_register_callbacks API
2556 of file include/rsi_bt_apis.h