Overview#
The Z-Wave 800 device portfolio is shown in the table below. The EFR32ZG23 SoC and ZGM230S SiP module expose the Z-Wave serial API via UART and both can be used as a gateway, controller, or end-device application. The ZGM230S SiP module combines a general-purpose SoC, crystal, supply decoupling components, and RF matching components into a single small-footprint module requiring only one or two decoupling capacitors, depending on the level of GPIO activity in the application.
Refer to [1] for an overview of supported Z-Wave regions and frequency bands supported by the Z-Wave protocol.
| Type |
QFN40 SoC 5x5 mm |
QFN48 SoC 6x6 mm |
LGA64 SiP 6.5x6.5 mm |
|---|---|---|---|
| Chip | EFR32ZG23 | ||
| Module | ZGM230S | ||
The applicable modules are clearly stated at the beginning of each of the following sections.