Description

Timer/Counter (TIMER) Peripheral API.

The timer module consists of three main parts:

General timer configuration and enable control.
Compare/capture control.
Dead time insertion control (may not be available for all timers).

Data Structures
struct	TIMER_Init_TypeDef
	TIMER initialization structure.

struct	TIMER_InitCC_TypeDef
	TIMER compare/capture initialization structure.

struct	TIMER_InitDTI_TypeDef
	TIMER Dead Time Insertion (DTI) initialization structure.

Functions
void	TIMER_Init (TIMER_TypeDef timer, const TIMER_Init_TypeDef init)
	Initialize TIMER.

void	TIMER_InitCC (TIMER_TypeDef timer, unsigned int ch, const TIMER_InitCC_TypeDef init)
	Initialize the TIMER compare/capture channel.

void	TIMER_InitDTI (TIMER_TypeDef timer, const TIMER_InitDTI_TypeDef init)
	Initialize the TIMER DTI unit.

void	TIMER_Reset (TIMER_TypeDef *timer)
	Reset the TIMER to the same state that it was in after a hardware reset.

bool	TIMER_Valid (const TIMER_TypeDef *ref)
	Validate the TIMER register block pointer.

bool	TIMER_SupportsDTI (const TIMER_TypeDef *ref)
	Check whether the TIMER is valid and supports Dead Timer Insertion (DTI).

uint32_t	TIMER_MaxCount (const TIMER_TypeDef *ref)
	Get the Max count of the timer.

uint32_t	TIMER_CaptureGet (TIMER_TypeDef *timer, unsigned int ch)
	Get compare/capture value for the compare/capture channel.

uint32_t	TIMER_CaptureBufGet (TIMER_TypeDef *timer, unsigned int ch)
	Get the buffered compare/capture value for compare/capture channel.

void	TIMER_CompareBufSet (TIMER_TypeDef *timer, unsigned int ch, uint32_t val)
	Set the compare value buffer for the compare/capture channel when operating in compare or PWM mode.

void	TIMER_CompareSet (TIMER_TypeDef *timer, unsigned int ch, uint32_t val)
	Set the compare value for compare/capture channel when operating in compare or PWM mode.

uint32_t	TIMER_CounterGet (TIMER_TypeDef *timer)
	Get the TIMER counter value.

void	TIMER_CounterSet (TIMER_TypeDef *timer, uint32_t val)
	Set the TIMER counter value.

void	TIMER_Enable (TIMER_TypeDef *timer, bool enable)
	Start/stop TIMER.

void	TIMER_EnableDTI (TIMER_TypeDef *timer, bool enable)
	Enable or disable DTI unit.

uint32_t	TIMER_GetDTIFault (TIMER_TypeDef *timer)
	Get DTI fault source flags status.

void	TIMER_ClearDTIFault (TIMER_TypeDef *timer, uint32_t flags)
	Clear DTI fault source flags.

void	TIMER_IntClear (TIMER_TypeDef *timer, uint32_t flags)
	Clear one or more pending TIMER interrupts.

void	TIMER_IntDisable (TIMER_TypeDef *timer, uint32_t flags)
	Disable one or more TIMER interrupts.

void	TIMER_IntEnable (TIMER_TypeDef *timer, uint32_t flags)
	Enable one or more TIMER interrupts.

uint32_t	TIMER_IntGet (TIMER_TypeDef *timer)
	Get pending TIMER interrupt flags.

uint32_t	TIMER_IntGetEnabled (TIMER_TypeDef *timer)
	Get enabled and pending TIMER interrupt flags.

void	TIMER_IntSet (TIMER_TypeDef *timer, uint32_t flags)
	Set one or more pending TIMER interrupts from SW.

void	TIMER_Lock (TIMER_TypeDef *timer)
	Lock some TIMER registers to protect them from being modified.

void	TIMER_TopBufSet (TIMER_TypeDef *timer, uint32_t val)
	Set the top value buffer for the timer.

uint32_t	TIMER_TopGet (TIMER_TypeDef *timer)
	Get the top value setting for the timer.

void	TIMER_TopSet (TIMER_TypeDef *timer, uint32_t val)
	Set the top value for timer.

void	TIMER_Unlock (TIMER_TypeDef *timer)
	Unlock TIMER to enable writing to locked registers again.

Macros
#define	TIMER_INIT_DEFAULT
	Default configuration for TIMER initialization structure.

#define	TIMER_INITCC_DEFAULT
	Default configuration for TIMER compare/capture initialization structure.

#define	TIMER_INITDTI_DEFAULT
	Default configuration for TIMER DTI initialization structure.

Typedefs
typedef uint8_t	TIMER_PRSSEL_TypeDef
	Peripheral Reflex System signal.

Enumerations
enum	TIMER_CCMode_TypeDef { timerCCModeOff = _TIMER_CC_CTRL_MODE_OFF, timerCCModeCapture = _TIMER_CC_CTRL_MODE_INPUTCAPTURE, timerCCModeCompare = _TIMER_CC_CTRL_MODE_OUTPUTCOMPARE, timerCCModePWM = _TIMER_CC_CTRL_MODE_PWM }
	Timer compare/capture mode.

enum	TIMER_ClkSel_TypeDef { timerClkSelHFPerClk = _TIMER_CTRL_CLKSEL_PRESCHFPERCLK, timerClkSelCC1 = _TIMER_CTRL_CLKSEL_CC1, timerClkSelCascade = _TIMER_CTRL_CLKSEL_TIMEROUF }
	Clock select.

enum	TIMER_Edge_TypeDef { timerEdgeRising = _TIMER_CC_CTRL_ICEDGE_RISING, timerEdgeFalling = _TIMER_CC_CTRL_ICEDGE_FALLING, timerEdgeBoth = _TIMER_CC_CTRL_ICEDGE_BOTH, timerEdgeNone = _TIMER_CC_CTRL_ICEDGE_NONE }
	Input capture edge select.

enum	TIMER_Event_TypeDef { timerEventEveryEdge = _TIMER_CC_CTRL_ICEVCTRL_EVERYEDGE, timerEventEvery2ndEdge = _TIMER_CC_CTRL_ICEVCTRL_EVERYSECONDEDGE, timerEventRising = _TIMER_CC_CTRL_ICEVCTRL_RISING, timerEventFalling = _TIMER_CC_CTRL_ICEVCTRL_FALLING }
	Input capture event control.

enum	TIMER_InputAction_TypeDef { timerInputActionNone = _TIMER_CTRL_FALLA_NONE, timerInputActionStart = _TIMER_CTRL_FALLA_START, timerInputActionStop = _TIMER_CTRL_FALLA_STOP, timerInputActionReloadStart = _TIMER_CTRL_FALLA_RELOADSTART }
	Input edge action.

enum	TIMER_Mode_TypeDef { timerModeUp = _TIMER_CTRL_MODE_UP, timerModeDown = _TIMER_CTRL_MODE_DOWN, timerModeUpDown = _TIMER_CTRL_MODE_UPDOWN, timerModeQDec = _TIMER_CTRL_MODE_QDEC }
	Timer mode.

enum	TIMER_OutputAction_TypeDef { timerOutputActionNone = _TIMER_CC_CTRL_CUFOA_NONE, timerOutputActionToggle = _TIMER_CC_CTRL_CUFOA_TOGGLE, timerOutputActionClear = _TIMER_CC_CTRL_CUFOA_CLEAR, timerOutputActionSet = _TIMER_CC_CTRL_CUFOA_SET }
	Compare/capture output action.

enum	TIMER_Prescale_TypeDef { timerPrescale1 = _TIMER_CTRL_PRESC_DIV1, timerPrescale2 = _TIMER_CTRL_PRESC_DIV2, timerPrescale4 = _TIMER_CTRL_PRESC_DIV4, timerPrescale8 = _TIMER_CTRL_PRESC_DIV8, timerPrescale16 = _TIMER_CTRL_PRESC_DIV16, timerPrescale32 = _TIMER_CTRL_PRESC_DIV32, timerPrescale64 = _TIMER_CTRL_PRESC_DIV64, timerPrescale128 = _TIMER_CTRL_PRESC_DIV128, timerPrescale256 = _TIMER_CTRL_PRESC_DIV256, timerPrescale512 = _TIMER_CTRL_PRESC_DIV512, timerPrescale1024 = _TIMER_CTRL_PRESC_DIV1024 }
	Prescaler.

enum	TIMER_DtiFaultAction_TypeDef { timerDtiFaultActionNone = _TIMER_DTFC_DTFA_NONE, timerDtiFaultActionInactive = _TIMER_DTFC_DTFA_INACTIVE, timerDtiFaultActionClear = _TIMER_DTFC_DTFA_CLEAR, timerDtiFaultActionTristate = _TIMER_DTFC_DTFA_TRISTATE }
	DT (Dead Time) Fault Actions.

enum	TIMER_PrsOutput_t { timerPrsOutputPulse = 0, timerPrsOutputLevel = 1, timerPrsOutputDefault = timerPrsOutputPulse }
	PRS Output configuration.

Function Documentation

◆ TIMER_Init()

void TIMER_Init	(	TIMER_TypeDef *	`timer,`
		const TIMER_Init_TypeDef *	`init`
	)

Initialize TIMER.

Notice that the counter top must be configured separately with, for instance TIMER_TopSet() . In addition, compare/capture and dead-time insertion initialization must be initialized separately if used, which should probably be done prior to using this function if configuring the TIMER to start when initialization is completed.

Parameters

[in]	`timer`	A pointer to the TIMER peripheral register block.
[in]	`init`	A pointer to the TIMER initialization structure.

◆ TIMER_InitCC()

void TIMER_InitCC	(	TIMER_TypeDef *	`timer,`
		unsigned int	`ch,`
		const TIMER_InitCC_TypeDef *	`init`
	)

Initialize the TIMER compare/capture channel.

Notice that if operating the channel in compare mode, the CCV and CCVB register must be set separately, as required.

Parameters

[in]	`timer`	A pointer to the TIMER peripheral register block.
[in]	`ch`	A compare/capture channel to initialize for.
[in]	`init`	A pointer to the TIMER initialization structure.

◆ TIMER_InitDTI()

void TIMER_InitDTI	(	TIMER_TypeDef *	`timer,`
		const TIMER_InitDTI_TypeDef *	`init`
	)

Initialize the TIMER DTI unit.

Parameters

[in]	`timer`	A pointer to the TIMER peripheral register block.
[in]	`init`	A pointer to the TIMER DTI initialization structure.

◆ TIMER_Reset()

void TIMER_Reset ( TIMER_TypeDef * timer )

Reset the TIMER to the same state that it was in after a hardware reset.

Note: The ROUTE register is NOT reset by this function to allow for a centralized setup of this feature.

Parameters

[in] timer A pointer to the TIMER peripheral register block.

◆ TIMER_Valid()

bool TIMER_Valid ( const TIMER_TypeDef * ref )

inline

Validate the TIMER register block pointer.

Parameters

[in] ref Pointer to the TIMER peripheral register block.

Returns: True if ref points to a valid timer, false otherwise.

◆ TIMER_SupportsDTI()

bool TIMER_SupportsDTI ( const TIMER_TypeDef * ref )

inline

Check whether the TIMER is valid and supports Dead Timer Insertion (DTI).

Parameters

[in] ref Pointer to the TIMER peripheral register block.

Returns: True if ref points to a valid timer that supports DTI, false otherwise.

◆ TIMER_MaxCount()

uint32_t TIMER_MaxCount ( const TIMER_TypeDef * ref )

inline

Get the Max count of the timer.

Parameters

[in] ref Pointer to the TIMER peripheral register block.

Returns: The max count value of the timer. This is 0xFFFF for 16 bit timers and 0xFFFFFFFF for 32 bit timers.

◆ TIMER_CaptureGet()

uint32_t TIMER_CaptureGet	(	TIMER_TypeDef *	`timer,`
		unsigned int	`ch`
	)

inline

Get compare/capture value for the compare/capture channel.

Parameters

[in]	`timer`	Pointer to the TIMER peripheral register block.
[in]	`ch`	Compare/capture channel to access.

Returns: Current capture value.

◆ TIMER_CaptureBufGet()

uint32_t TIMER_CaptureBufGet	(	TIMER_TypeDef *	`timer,`
		unsigned int	`ch`
	)

inline

Get the buffered compare/capture value for compare/capture channel.

Parameters

[in]	`timer`	Pointer to the TIMER peripheral register block.
[in]	`ch`	Compare/capture channel to access.

Returns: Current buffered capture value.

◆ TIMER_CompareBufSet()

void TIMER_CompareBufSet	(	TIMER_TypeDef *	`timer,`
		unsigned int	`ch,`
		uint32_t	`val`
	)

inline

Set the compare value buffer for the compare/capture channel when operating in compare or PWM mode.

The compare value buffer holds the value which will be written to TIMERn_CCx_CCV on an update event if the buffer has been updated since the last event.

Parameters

[in]	`timer`	Pointer to the TIMER peripheral register block.
[in]	`ch`	Compare/capture channel to access.
[in]	`val`	Value to set in compare value buffer register.

◆ TIMER_CompareSet()

void TIMER_CompareSet	(	TIMER_TypeDef *	`timer,`
		unsigned int	`ch,`
		uint32_t	`val`
	)

inline

Set the compare value for compare/capture channel when operating in compare or PWM mode.

Parameters

[in]	`timer`	Pointer to the TIMER peripheral register block.
[in]	`ch`	Compare/capture channel to access.
[in]	`val`	Value to set in compare value register.

◆ TIMER_CounterGet()

uint32_t TIMER_CounterGet ( TIMER_TypeDef * timer )

inline

Get the TIMER counter value.

Parameters

[in] timer Pointer to TIMER peripheral register block.

Returns: Current TIMER counter value.

◆ TIMER_CounterSet()

void TIMER_CounterSet	(	TIMER_TypeDef *	`timer,`
		uint32_t	`val`
	)

inline

Set the TIMER counter value.

Parameters

[in]	`timer`	Pointer to the TIMER peripheral register block.
[in]	`val`	Value to set counter to.

◆ TIMER_Enable()

void TIMER_Enable	(	TIMER_TypeDef *	`timer,`
		bool	`enable`
	)

inline

Start/stop TIMER.

Parameters

[in]	`timer`	Pointer to the TIMER peripheral register block.
[in]	`enable`	Set to true to enable counting; set to false otherwise.

◆ TIMER_EnableDTI()

void TIMER_EnableDTI	(	TIMER_TypeDef *	`timer,`
		bool	`enable`
	)

inline

Enable or disable DTI unit.

Parameters

[in]	`timer`	Pointer to the TIMER peripheral register block.
[in]	`enable`	Set to true to enable DTI unit; set to false otherwise.

◆ TIMER_GetDTIFault()

uint32_t TIMER_GetDTIFault ( TIMER_TypeDef * timer )

inline

Get DTI fault source flags status.

Note: Event bits are not cleared by this function.

Parameters

[in] timer Pointer to the TIMER peripheral register block.

Returns: Status of the DTI fault source flags. Returns one or more valid DTI fault source flags (TIMER_DTFAULT_nnn) OR'ed together.

◆ TIMER_ClearDTIFault()

void TIMER_ClearDTIFault	(	TIMER_TypeDef *	`timer,`
		uint32_t	`flags`
	)

inline

Clear DTI fault source flags.

Parameters

[in]	`timer`	Pointer to the TIMER peripheral register block.
[in]	`flags`	DTI fault source(s) to clear. Use one or more valid DTI fault source flags (TIMER_DTFAULT_nnn) OR'ed together.

◆ TIMER_IntClear()

void TIMER_IntClear	(	TIMER_TypeDef *	`timer,`
		uint32_t	`flags`
	)

inline

Clear one or more pending TIMER interrupts.

Parameters

[in]	`timer`	Pointer to the TIMER peripheral register block.
[in]	`flags`	Pending TIMER interrupt source(s) to clear. Use one or more valid interrupt flags for the TIMER module (TIMER_IF_nnn) OR'ed together.

◆ TIMER_IntDisable()

void TIMER_IntDisable	(	TIMER_TypeDef *	`timer,`
		uint32_t	`flags`
	)

inline

Disable one or more TIMER interrupts.

Parameters

[in]	`timer`	Pointer to the TIMER peripheral register block.
[in]	`flags`	TIMER interrupt source(s) to disable. Use one or more valid interrupt flags for the TIMER module (TIMER_IF_nnn) OR'ed together.

◆ TIMER_IntEnable()

void TIMER_IntEnable	(	TIMER_TypeDef *	`timer,`
		uint32_t	`flags`
	)

inline

Enable one or more TIMER interrupts.

Note: Depending on the use, a pending interrupt may already be set prior to enabling the interrupt. To ignore a pending interrupt, consider using TIMER_IntClear() prior to enabling the interrupt.

Parameters

[in]	`timer`	Pointer to the TIMER peripheral register block.
[in]	`flags`	TIMER interrupt source(s) to enable. Use one or more valid interrupt flags for the TIMER module (TIMER_IF_nnn) OR'ed together.

◆ TIMER_IntGet()

uint32_t TIMER_IntGet ( TIMER_TypeDef * timer )

inline

Get pending TIMER interrupt flags.

Note: Event bits are not cleared by this function.

Parameters

[in] timer Pointer to the TIMER peripheral register block.

Returns: TIMER interrupt source(s) pending. Returns one or more valid interrupt flags for the TIMER module (TIMER_IF_nnn) OR'ed together.

◆ TIMER_IntGetEnabled()

uint32_t TIMER_IntGetEnabled ( TIMER_TypeDef * timer )

inline

Get enabled and pending TIMER interrupt flags.

Useful for handling more interrupt sources in the same interrupt handler.

Parameters

[in] timer Pointer to the TIMER peripheral register block.

Note: Interrupt flags are not cleared by this function.

Returns

Pending and enabled TIMER interrupt sources. The return value is the bitwise AND combination of

the OR combination of enabled interrupt sources in TIMERx_IEN_nnn register (TIMERx_IEN_nnn) and
the OR combination of valid interrupt flags of the TIMER module (TIMERx_IF_nnn).

◆ TIMER_IntSet()

void TIMER_IntSet	(	TIMER_TypeDef *	`timer,`
		uint32_t	`flags`
	)

inline

Set one or more pending TIMER interrupts from SW.

Parameters

[in]	`timer`	Pointer to the TIMER peripheral register block.
[in]	`flags`	TIMER interrupt source(s) to set to pending. Use one or more valid interrupt flags for the TIMER module (TIMER_IF_nnn) OR'ed together.

◆ TIMER_Lock()

void TIMER_Lock ( TIMER_TypeDef * timer )

inline

Lock some TIMER registers to protect them from being modified.

Refer to the reference manual for TIMER registers that will be locked.

Note: If locking the TIMER registers, they must be unlocked prior to using any TIMER API function that modifies TIMER registers protected by the lock.

Parameters

[in] timer Pointer to TIMER peripheral register block.

◆ TIMER_TopBufSet()

void TIMER_TopBufSet	(	TIMER_TypeDef *	`timer,`
		uint32_t	`val`
	)

inline

Set the top value buffer for the timer.

When top value buffer register is updated, value is loaded into top value register at the next wrap around. This feature is useful in order to update top value safely when timer is running.

Parameters

[in]	`timer`	Pointer to the TIMER peripheral register block.
[in]	`val`	Value to set in top value buffer register.

◆ TIMER_TopGet()

uint32_t TIMER_TopGet ( TIMER_TypeDef * timer )

inline

Get the top value setting for the timer.

Parameters

[in] timer Pointer to the TIMER peripheral register block.

Returns: Current top value.

◆ TIMER_TopSet()

void TIMER_TopSet	(	TIMER_TypeDef *	`timer,`
		uint32_t	`val`
	)

inline

Set the top value for timer.

Parameters

[in]	`timer`	Pointer to the TIMER peripheral register block.
[in]	`val`	Value to set in top value register.

◆ TIMER_Unlock()

void TIMER_Unlock ( TIMER_TypeDef * timer )

inline

Unlock TIMER to enable writing to locked registers again.

Parameters

[in] timer Pointer to the TIMER peripheral register block.

Macro Definition Documentation

◆ TIMER_INIT_DEFAULT

#define TIMER_INIT_DEFAULT

Value:

         {                                                                                   \
        
         true,
         
          /* Enable timer when initialization completes. */
         
         \
        
         false,
         
          /* Stop counter during debug halt. */
         
         \
        
         timerPrescale1,
         
          /* No prescaling. */
         
         \
        
         timerClkSelHFPerClk,
         
          /* Select HFPER / HFPERB clock. */
         
         \
        
         false,
         
          /* Not 2x count mode. */
         
         \
        
         false,
         
          /* No ATI. */
         
         \
        
         timerInputActionNone,
         
          /* No action on falling input edge. */
         
         \
        
         timerInputActionNone,
         
          /* No action on rising input edge. */
         
         \
        
         timerModeUp,
         
          /* Up-counting. */
         
         \
        
         false,
         
          /* Do not clear DMA requests when DMA channel is active. */
         
         \
        
         false,
         
          /* Select X2 quadrature decode mode (if used). */
         
         \
        
         false,
         
          /* Disable one shot. */
         
         \
        
         false
         
          /* Not started/stopped/reloaded by other timers. */
         
         \
        
         }

Default configuration for TIMER initialization structure.

◆ TIMER_INITCC_DEFAULT

#define TIMER_INITCC_DEFAULT

Value:

         {                                                                          \
        
         timerEventEveryEdge,
         
          /* Event on every capture. */
         
         \
        
         timerEdgeRising,
         
          /* Input capture edge on rising edge. */
         
         \
        
         0,
         
          /* Not used by default, select PRS channel 0. */
         
         \
        
         timerOutputActionNone,
         
          /* No action on underflow. */
         
         \
        
         timerOutputActionNone,
         
          /* No action on overflow. */
         
         \
        
         timerOutputActionNone,
         
          /* No action on match. */
         
         \
        
         timerCCModeOff,
         
          /* Disable compare/capture channel. */
         
         \
        
         false,
         
          /* Disable filter. */
         
         \
        
         false,
         
          /* No PRS input. */
         
         \
        
         false,
         
          /* Clear output when counter disabled. */
         
         \
        
         false,
         
          /* Do not invert output. */
         
         \
        
         timerPrsOutputDefault,
         
          /* Use default PRS output configuration. */
         
         \
        
         }

Default configuration for TIMER compare/capture initialization structure.

◆ TIMER_INITDTI_DEFAULT

#define TIMER_INITDTI_DEFAULT

Value:

         {                                                                                \
        
         true,
         
          /* Enable the DTI. */
         
         \
        
         false,
         
          /* CC[0|1|2] outputs are active high. */
         
         \
        
         false,
         
          /* CDTI[0|1|2] outputs are not inverted. */
         
         \
        
         false,
         
          /* No auto restart when debugger exits. */
         
         \
        
         false,
         
          /* No PRS source selected. */
         
         \
        
         0,
         
          /* Not used by default, select PRS channel 0. */
         
         \
        
         timerPrescale1,
         
          /* No prescaling.  */
         
         \
        
         0,
         
          /* No rise time. */
         
         \
        
         0,
         
          /* No fall time. */
         
         \
        
         TIMER_DTOGEN_DTOGCC0EN | TIMER_DTOGEN_DTOGCDTI0EN,
         
          /* Enable CC0 and CDTI0. */
         
         \
        
         true,
         
          /* Enable core lockup as fault source. */
         
         \
        
         true,
         
          /* Enable debugger as fault source. */
         
         \
        
         false,
         
          /* Disable PRS fault source 0. */
         
         \
        
         0,
         
          /* Not used by default, select PRS channel 0. */
         
         \
        
         false,
         
          /* Disable PRS fault source 1. */
         
         \
        
         0,
         
          /* Not used by default, select PRS channel 0. */
         
         \
        
         timerDtiFaultActionInactive,
         
          /* No fault action. */
         
         \
        
         }

Default configuration for TIMER DTI initialization structure.

Typedef Documentation

◆ TIMER_PRSSEL_TypeDef

typedef uint8_t TIMER_PRSSEL_TypeDef

Peripheral Reflex System signal.

Enumeration Type Documentation

◆ TIMER_CCMode_TypeDef

enum TIMER_CCMode_TypeDef

Timer compare/capture mode.

Enumerator
timerCCModeOff	Channel turned off.
timerCCModeCapture	Input capture.
timerCCModeCompare	Output compare.
timerCCModePWM	Pulse-Width modulation.

◆ TIMER_ClkSel_TypeDef

enum TIMER_ClkSel_TypeDef

Clock select.

Enumerator
timerClkSelHFPerClk	Prescaled HFPER / HFPERB clock.
timerClkSelCC1	Compare/Capture Channel 1 Input.
timerClkSelCascade	Cascaded clocked by underflow or overflow by lower numbered timer.

◆ TIMER_Edge_TypeDef

enum TIMER_Edge_TypeDef

Input capture edge select.

Enumerator
timerEdgeRising	Rising edges detected.
timerEdgeFalling	Falling edges detected.
timerEdgeBoth	Both edges detected.
timerEdgeNone	No edge detection, leave signal as is.

◆ TIMER_Event_TypeDef

enum TIMER_Event_TypeDef

Input capture event control.

Enumerator
timerEventEveryEdge	PRS output pulse, interrupt flag, and DMA request set on every capture.
timerEventEvery2ndEdge	PRS output pulse, interrupt flag, and DMA request set on every second capture.
timerEventRising	PRS output pulse, interrupt flag, and DMA request set on rising edge (if input capture edge = BOTH).
timerEventFalling	PRS output pulse, interrupt flag, and DMA request set on falling edge (if input capture edge = BOTH).

◆ TIMER_InputAction_TypeDef

enum TIMER_InputAction_TypeDef

Input edge action.

Enumerator
timerInputActionNone	No action taken.
timerInputActionStart	Start counter without reload.
timerInputActionStop	Stop counter without reload.
timerInputActionReloadStart	Reload and start counter.

◆ TIMER_Mode_TypeDef

enum TIMER_Mode_TypeDef

Timer mode.

Enumerator
timerModeUp	Up-counting.
timerModeDown	Down-counting.
timerModeUpDown	Up/down-counting.
timerModeQDec	Quadrature decoder.

◆ TIMER_OutputAction_TypeDef

enum TIMER_OutputAction_TypeDef

Compare/capture output action.

Enumerator
timerOutputActionNone	No action.
timerOutputActionToggle	Toggle on event.
timerOutputActionClear	Clear on event.
timerOutputActionSet	Set on event.

◆ TIMER_Prescale_TypeDef

enum TIMER_Prescale_TypeDef

Prescaler.

Enumerator
timerPrescale1	Divide by 1.
timerPrescale2	Divide by 2.
timerPrescale4	Divide by 4.
timerPrescale8	Divide by 8.
timerPrescale16	Divide by 16.
timerPrescale32	Divide by 32.
timerPrescale64	Divide by 64.
timerPrescale128	Divide by 128.
timerPrescale256	Divide by 256.
timerPrescale512	Divide by 512.
timerPrescale1024	Divide by 1024.

◆ TIMER_DtiFaultAction_TypeDef

enum TIMER_DtiFaultAction_TypeDef

DT (Dead Time) Fault Actions.

Enumerator
timerDtiFaultActionNone	No action on fault.
timerDtiFaultActionInactive	Set outputs inactive.
timerDtiFaultActionClear	Clear outputs.
timerDtiFaultActionTristate	Tristate outputs.

◆ TIMER_PrsOutput_t

enum TIMER_PrsOutput_t

PRS Output configuration.

Enumerator
timerPrsOutputPulse	Pulse PRS output from a channel.
timerPrsOutputLevel	PRS output follows CC out level.
timerPrsOutputDefault	Default PRS output behavior.

TIMER - Timer/Counter

Description

Data Structures

Functions

Macros

Typedefs

Enumerations

Function Documentation

◆ TIMER_Init()

◆ TIMER_InitCC()

◆ TIMER_InitDTI()

◆ TIMER_Reset()

◆ TIMER_Valid()

◆ TIMER_SupportsDTI()

◆ TIMER_MaxCount()

◆ TIMER_CaptureGet()

◆ TIMER_CaptureBufGet()

◆ TIMER_CompareBufSet()

◆ TIMER_CompareSet()

◆ TIMER_CounterGet()

◆ TIMER_CounterSet()

◆ TIMER_Enable()

◆ TIMER_EnableDTI()

◆ TIMER_GetDTIFault()

◆ TIMER_ClearDTIFault()

◆ TIMER_IntClear()

◆ TIMER_IntDisable()

◆ TIMER_IntEnable()

◆ TIMER_IntGet()

◆ TIMER_IntGetEnabled()

◆ TIMER_IntSet()

◆ TIMER_Lock()

◆ TIMER_TopBufSet()

◆ TIMER_TopGet()

◆ TIMER_TopSet()

◆ TIMER_Unlock()

Macro Definition Documentation

◆ TIMER_INIT_DEFAULT

◆ TIMER_INITCC_DEFAULT

◆ TIMER_INITDTI_DEFAULT

Typedef Documentation

◆ TIMER_PRSSEL_TypeDef

Enumeration Type Documentation

◆ TIMER_CCMode_TypeDef

◆ TIMER_ClkSel_TypeDef

◆ TIMER_Edge_TypeDef

◆ TIMER_Event_TypeDef

◆ TIMER_InputAction_TypeDef

◆ TIMER_Mode_TypeDef

◆ TIMER_OutputAction_TypeDef

◆ TIMER_Prescale_TypeDef

◆ TIMER_DtiFaultAction_TypeDef

◆ TIMER_PrsOutput_t