bmp280_t Struct Reference
This structure holds BMP280 initialization parameters.
Definition at line 767
of file bmp280.h
.
#include <
bmp280.h
>
Data Fields | |
BMP280_RD_FUNC_PTR | |
BMP280_WR_FUNC_PTR | |
struct bmp280_calib_param_t | calib_param |
u8 | chip_id |
void(* | delay_msec )(BMP280_MDELAY_DATA_TYPE) |
u8 | dev_addr |
u8 | oversamp_pressure |
u8 | oversamp_temperature |
Field Documentation
bmp280_t::BMP280_RD_FUNC_PTR |
bus read function pointer
Definition at line 777
of file bmp280.h
.
bmp280_t::BMP280_WR_FUNC_PTR |
bus write function pointer
Definition at line 776
of file bmp280.h
.
struct bmp280_calib_param_t bmp280_t::calib_param |
calibration data
Definition at line 768
of file bmp280.h
.
Referenced by bmp280_compensate_pressure_double(), bmp280_compensate_pressure_int32(), bmp280_compensate_pressure_int64(), bmp280_compensate_temperature_double(), bmp280_compensate_temperature_int32(), and bmp280_get_calib_param().
u8 bmp280_t::chip_id |
void(* bmp280_t::delay_msec) (BMP280_MDELAY_DATA_TYPE) |
delay function pointer
Definition at line 778
of file bmp280.h
.
Referenced by BAP_init(), bmp280_get_forced_uncomp_pressure_temperature(), and bmp280_init().
u8 bmp280_t::dev_addr |
device address of the sensor
Definition at line 771
of file bmp280.h
.
Referenced by BAP_init(), bmp280_get_calib_param(), bmp280_get_filter(), bmp280_get_forced_uncomp_pressure_temperature(), bmp280_get_oversamp_pressure(), bmp280_get_oversamp_temperature(), bmp280_get_power_mode(), bmp280_get_spi3(), bmp280_get_standby_durn(), bmp280_init(), bmp280_read_register(), bmp280_read_uncomp_pressure(), bmp280_read_uncomp_pressure_temperature(), bmp280_read_uncomp_temperature(), bmp280_set_filter(), bmp280_set_oversamp_pressure(), bmp280_set_oversamp_temperature(), bmp280_set_power_mode(), bmp280_set_soft_rst(), bmp280_set_spi3(), bmp280_set_standby_durn(), bmp280_set_work_mode(), and bmp280_write_register().
u8 bmp280_t::oversamp_pressure |
pressure over sampling
Definition at line 774
of file bmp280.h
.
Referenced by bmp280_compute_wait_time(), bmp280_get_forced_uncomp_pressure_temperature(), bmp280_get_oversamp_pressure(), bmp280_set_oversamp_pressure(), bmp280_set_power_mode(), and bmp280_set_work_mode().
u8 bmp280_t::oversamp_temperature |
temperature over sampling
Definition at line 773
of file bmp280.h
.
Referenced by bmp280_compute_wait_time(), bmp280_get_forced_uncomp_pressure_temperature(), bmp280_get_oversamp_temperature(), bmp280_set_oversamp_temperature(), bmp280_set_power_mode(), and bmp280_set_work_mode().
The documentation for this struct was generated from the following file:
- C:/repos/embsw_super_h1/hardware/kit/common/bsp/thunderboard/bosch/BMP280_driver/
bmp280.h