Functions
void	ACMP0_IRQHandler (void)

void	ADC0_IRQHandler (void)
	Interrupt handler is executed with frequency ~28Hz when panel is not pressed and with frequency ~140Hz when panel is pressed - this will give ~50 readings per second.

void	AGC_IRQHandler (void)

void	BUFC_IRQHandler (void)

void	BusFault_Handler (void)

void	CMU_IRQHandler (void)

void	CRYOTIMER_IRQHandler (void)

void	CRYPTO_IRQHandler (void)

void	DebugMon_Handler (void)

void	EMU_IRQHandler (void)
	EMU Interrupt Handler.

void	FRC_IRQHandler (void)

void	FRC_PRI_IRQHandler (void)

void	GPIO_EVEN_IRQHandler (void)

void	GPIO_ODD_IRQHandler (void)

void	HardFault_Handler (void)

void	I2C0_IRQHandler (void)

void	IDAC0_IRQHandler (void)

void	LDMA_IRQHandler (void)

void	LETIMER0_IRQHandler (void)

void	LEUART0_IRQHandler (void)

void	MemManage_Handler (void)

void	MODEM_IRQHandler (void)

void	MSC_IRQHandler (void)

void	NMI_Handler (void)

void	PCNT0_IRQHandler (void)

void	PendSV_Handler (void)

void	PROTIMER_IRQHandler (void)

void	RAC_RSM_IRQHandler (void)

void	RAC_SEQ_IRQHandler (void)

void	Reset_Handler (void)

void	RFSENSE_IRQHandler (void)

void	RTCC_IRQHandler (void)

void	SVC_Handler (void)

void	SYNTH_IRQHandler (void)

uint32_t	SystemCoreClockGet (void)
	Get the current core clock frequency.

static __INLINE void	SystemCoreClockUpdate (void)
	Update CMSIS SystemCoreClock variable.

uint32_t	SystemHFClockGet (void)
	Get the current HFCLK frequency.

uint32_t	SystemHFXOClockGet (void)
	Get high frequency crystal oscillator clock frequency for target system.

void	SystemHFXOClockSet (uint32_t freq)
	Set high frequency crystal oscillator clock frequency for target system.

void	SystemInit (void)
	Initialize the system.

uint32_t	SystemLFRCOClockGet (void)
	Get low frequency RC oscillator clock frequency for target system.

uint32_t	SystemLFXOClockGet (void)
	Get low frequency crystal oscillator clock frequency for target system.

void	SystemLFXOClockSet (uint32_t freq)
	Set low frequency crystal oscillator clock frequency for target system.

uint32_t	SystemMaxCoreClockGet (void)
	Get the maximum core clock frequency.

uint32_t	SystemULFRCOClockGet (void)
	Get ultra low frequency RC oscillator clock frequency for target system.

void	SysTick_Handler (void)
	Interrupt Service Routine for system tick counter.

void	TIMER0_IRQHandler (void)
	TIMER0 interrupt handler.

void	TIMER1_IRQHandler (void)

void	UsageFault_Handler (void)

void	USART0_RX_IRQHandler (void)

void	USART0_TX_IRQHandler (void)

void	USART1_RX_IRQHandler (void)

void	USART1_TX_IRQHandler (void)

void	WDOG0_IRQHandler (void)

Variables
uint32_t	SystemCoreClock
	System System Clock Frequency (Core Clock).

uint32_t	SystemHfrcoFreq
	System HFRCO frequency.

Function Documentation

void ACMP0_IRQHandler ( void )

ACMP0 IRQ Handler

void ADC0_IRQHandler ( void )

Interrupt handler is executed with frequency ~28Hz when panel is not pressed and with frequency ~140Hz when panel is pressed - this will give ~50 readings per second.

ADC0 IRQ Handler

Definition at line 242 of file touch.c .

References ADC_InitSingle_TypeDef::acqTime , ADC0 , ADC_DataSingleGet() , ADC_IF_SINGLE , ADC_InitSingle() , ADC_IntClear() , ADC_Start() , ADC_X , ADC_Y , adcAcqTime128 , adcAcqTime16 , adcRefVDD , adcResOVS , adcStartSingle , TOUCH_Pos_TypeDef::adcx , TOUCH_Pos_TypeDef::adcy , GPIO_PinInGet() , GPIO_PinModeSet() , gpioModeInput , gpioModeInputPullFilter , gpioModePushPull , TOUCH_Pos_TypeDef::pen , ADC_InitSingle_TypeDef::reference , ADC_InitSingle_TypeDef::resolution , TOUCH_CallUpcall() , TOUCH_RecalculatePosition() , TOUCH_StateChanged() , TOUCH_X1_PIN , TOUCH_X1_PORT , TOUCH_X2_PIN , TOUCH_X2_PORT , TOUCH_Y1_PIN , TOUCH_Y1_PORT , TOUCH_Y2_PIN , TOUCH_Y2_PORT , TOUCH_Pos_TypeDef::x , and TOUCH_Pos_TypeDef::y .

void AGC_IRQHandler ( void )

AGC IRQ Handler

void BUFC_IRQHandler ( void )

BUFC IRQ Handler

void BusFault_Handler ( void )

Bus Fault Handler

void CMU_IRQHandler ( void )

CMU IRQ Handler

void CRYOTIMER_IRQHandler ( void )

CRYOTIMER IRQ Handler

void CRYPTO_IRQHandler ( void )

CRYPTO IRQ Handler

void DebugMon_Handler ( void )

Debug Monitor Handler

void EMU_IRQHandler ( void )

EMU Interrupt Handler.

EMU IRQ Handler

The EMU_IRQHandler provided by TEMPDRV will call TEMPDRV_IRQ_Handler. Configure EMU_CUSTOM_IRQ_HANDLER = true if the application wants to implement its own EMU_IRQHandler. This is typically needed if one of the non-temperature related EMU interrupt flags are in use.

Definition at line 87 of file tempdrv.c .

References TEMPDRV_IRQHandler() .

void FRC_IRQHandler ( void )

FRC IRQ Handler

void FRC_PRI_IRQHandler ( void )

FRC_PRI IRQ Handler

void GPIO_EVEN_IRQHandler ( void )

GPIO_EVEN IRQ Handler

Referenced by GPIOINT_CallbackRegister() .

void GPIO_ODD_IRQHandler ( void )

GPIO_ODD IRQ Handler

Referenced by GPIOINT_CallbackRegister() .

void HardFault_Handler ( void )

Hard Fault Handler

void I2C0_IRQHandler ( void )

I2C0 IRQ Handler

void IDAC0_IRQHandler ( void )

IDAC0 IRQ Handler

void LDMA_IRQHandler ( void )

LDMA IRQ Handler

void LETIMER0_IRQHandler ( void )

LETIMER0 IRQ Handler

void LEUART0_IRQHandler ( void )

LEUART0 IRQ Handler

void MemManage_Handler ( void )

MPU Fault Handler

void MODEM_IRQHandler ( void )

MODEM IRQ Handler

void MSC_IRQHandler ( void )

MSC IRQ Handler

void NMI_Handler ( void )

NMI Handler

void PCNT0_IRQHandler ( void )

PCNT0 IRQ Handler

void PendSV_Handler ( void )

PendSV Handler

void PROTIMER_IRQHandler ( void )

PROTIMER IRQ Handler

void RAC_RSM_IRQHandler ( void )

RAC_RSM IRQ Handler

void RAC_SEQ_IRQHandler ( void )

RAC_SEQ IRQ Handler

void Reset_Handler ( void )

Reset Handler

void RFSENSE_IRQHandler ( void )

RFSENSE IRQ Handler

void RTCC_IRQHandler ( void )

RTCC IRQ Handler

void SVC_Handler ( void )

SVCall Handler

void SYNTH_IRQHandler ( void )

SYNTH IRQ Handler

uint32_t SystemCoreClockGet ( void )

Get the current core clock frequency.

Calculate and get the current core clock frequency based on the current configuration. Assuming that the SystemCoreClock global variable is maintained, the core clock frequency is stored in that variable as well. This function will however calculate the core clock based on actual HW configuration. It will also update the SystemCoreClock global variable.

Note: This is an EFR32 proprietary function, not part of the CMSIS definition.

Returns: The current core clock frequency in Hz.

Definition at line 144 of file system_efr32mg1p.c .

References _CMU_HFCOREPRESC_PRESC_MASK , _CMU_HFCOREPRESC_PRESC_SHIFT , CMU , SystemCoreClock , and SystemHFClockGet() .

Referenced by CMU_ClockDivSet() , CMU_ClockFreqGet() , CMU_ClockPrescSet() , CMU_ClockSelectSet() , CMU_HFRCOBandSet() , SystemCoreClockUpdate() , SystemHFXOClockSet() , SystemLFXOClockSet() , TFT_AddressMappedInit() , and TFT_DirectInit() .

static __INLINE void SystemCoreClockUpdate ( void )

static

Update CMSIS SystemCoreClock variable.

CMSIS defines a global variable SystemCoreClock that shall hold the core frequency in Hz. If the core frequency is dynamically changed, the variable must be kept updated in order to be CMSIS compliant.

Notice that only if changing the core clock frequency through the EFR CMU API, this variable will be kept updated. This function is only provided for CMSIS compliance and if a user modifies the the core clock outside the CMU API.

Definition at line 126 of file system_efr32mg1p.h .

References SystemCoreClockGet() .

Referenced by CAPLESENSE_setupCMU() , EMU_EnterEM2() , and EMU_EnterEM3() .

uint32_t SystemHFClockGet ( void )

Get the current HFCLK frequency.

Note: This is an EFR32 proprietary function, not part of the CMSIS definition.

Returns: The current HFCLK frequency in Hz.

Definition at line 189 of file system_efr32mg1p.c .

References _CMU_HFCLKSTATUS_SELECTED_MASK , _CMU_HFPRESC_PRESC_MASK , _CMU_HFPRESC_PRESC_SHIFT , CMU , CMU_HFCLKSTATUS_SELECTED_HFXO , CMU_HFCLKSTATUS_SELECTED_LFRCO , CMU_HFCLKSTATUS_SELECTED_LFXO , EFR32_LFRCO_FREQ , and SystemHfrcoFreq .

Referenced by CMU_ClockDivSet() , CMU_ClockFreqGet() , and SystemCoreClockGet() .

uint32_t SystemHFXOClockGet ( void )

Get high frequency crystal oscillator clock frequency for target system.

Note: This is an EFR32 proprietary function, not part of the CMSIS definition.

Returns: HFXO frequency in Hz.

Definition at line 237 of file system_efr32mg1p.c .

Referenced by CMU_ClockSelectSet() , CMU_HFXOAutostartEnable() , and CMU_HFXOInit() .

void SystemHFXOClockSet ( uint32_t freq )

Set high frequency crystal oscillator clock frequency for target system.

Note: This function is mainly provided for being able to handle target systems with different HF crystal oscillator frequencies run-time. If used, it should probably only be used once during system startup.; This is an EFR32 proprietary function, not part of the CMSIS definition.

Parameters

[in] freq HFXO frequency in Hz used for target.

Definition at line 262 of file system_efr32mg1p.c .

References _CMU_HFCLKSTATUS_SELECTED_MASK , CMU , CMU_HFCLKSTATUS_SELECTED_HFXO , and SystemCoreClockGet() .

Referenced by BSP_initClocks() .

void SystemInit ( void )

Initialize the system.

Do required generic HW system init.

Note: This function is invoked during system init, before the main() routine and any data has been initialized. For this reason, it cannot do any initialization of variables etc.

Definition at line 291 of file system_efr32mg1p.c .

References _EMU_DCDCCLIMCTRL_BYPLIMEN_SHIFT , _EMU_DCDCCTRL_DCDCMODE_MASK , EMU , and EMU_DCDCCTRL_DCDCMODE_BYPASS .

uint32_t SystemLFRCOClockGet ( void )

Get low frequency RC oscillator clock frequency for target system.

Note: This is an EFR32 proprietary function, not part of the CMSIS definition.

Returns: LFRCO frequency in Hz.

Definition at line 329 of file system_efr32mg1p.c .

References EFR32_LFRCO_FREQ .

uint32_t SystemLFXOClockGet ( void )

Get low frequency crystal oscillator clock frequency for target system.

Note: This is an EFR32 proprietary function, not part of the CMSIS definition.

Returns: LFXO frequency in Hz.

Definition at line 363 of file system_efr32mg1p.c .

Referenced by UARTDRV_InitLeuart() .

void SystemLFXOClockSet ( uint32_t freq )

Set low frequency crystal oscillator clock frequency for target system.

Note: This function is mainly provided for being able to handle target systems with different HF crystal oscillator frequencies run-time. If used, it should probably only be used once during system startup.; This is an EFR32 proprietary function, not part of the CMSIS definition.

Parameters

[in] freq LFXO frequency in Hz used for target.

Definition at line 388 of file system_efr32mg1p.c .

References _CMU_HFCLKSTATUS_SELECTED_MASK , CMU , CMU_HFCLKSTATUS_SELECTED_LFXO , and SystemCoreClockGet() .

Referenced by BSP_initClocks() .

uint32_t SystemMaxCoreClockGet ( void )

Get the maximum core clock frequency.

Note: This is an EFR32 proprietary function, not part of the CMSIS definition.

Returns: The maximum core clock frequency in Hz.

Definition at line 170 of file system_efr32mg1p.c .

References EFR32_HFRCO_MAX_FREQ , and EFR32_HFXO_FREQ .

uint32_t SystemULFRCOClockGet ( void )

Get ultra low frequency RC oscillator clock frequency for target system.

Note: This is an EFR32 proprietary function, not part of the CMSIS definition.

Returns: ULFRCO frequency in Hz.

Definition at line 347 of file system_efr32mg1p.c .

References EFR32_ULFRCO_FREQ .

void SysTick_Handler ( void )

Interrupt Service Routine for system tick counter.

SysTick Handler

Returns: None

Definition at line 69 of file util.c .

void TIMER0_IRQHandler ( void )

TIMER0 interrupt handler.

TIMER0 IRQ Handler

When TIMER0 expires the number of pulses on TIMER1 is inserted into channelValues. If this values is bigger than what is recorded in channelMaxValues, channelMaxValues is updated. Finally, the next ACMP channel is selected.

Definition at line 106 of file capsense.c .

References channelMaxValues , channelValues , currentChannel , TIMER0 , TIMER1 , TIMER_CMD_STOP , and TIMER_IFC_OF .

void TIMER1_IRQHandler ( void )

TIMER1 IRQ Handler

void UsageFault_Handler ( void )

Usage Fault Handler

void USART0_RX_IRQHandler ( void )

USART0_RX IRQ Handler

void USART0_TX_IRQHandler ( void )

USART0_TX IRQ Handler

void USART1_RX_IRQHandler ( void )

USART1_RX IRQ Handler

void USART1_TX_IRQHandler ( void )

USART1_TX IRQ Handler

void WDOG0_IRQHandler ( void )

WDOG0 IRQ Handler

Variable Documentation

uint32_t SystemCoreClock

System System Clock Frequency (Core Clock).

System Clock Frequency (Core Clock)

(DO_NOT_INCLUDE_WITH_DOXYGEN)

Required CMSIS global variable that must be kept up-to-date.

Definition at line 102 of file system_efr32mg1p.c .

Referenced by SystemCoreClockGet() .

uint32_t SystemHfrcoFreq

System HFRCO frequency.

System HFRCO frequency

Note: This is an EFR32 proprietary variable, not part of the CMSIS definition.

Frequency of the system HFRCO oscillator

Definition at line 114 of file system_efr32mg1p.c .

Referenced by CMU_HFRCOBandGet() , CMU_HFRCOBandSet() , and SystemHFClockGet() .

EFR32Devices

Functions

Variables

Function Documentation

Variable Documentation