SPI interface API for KSZ8851SNL Ethernet controller.

Version: 5.6.0

License

Copyright 2015 Silicon Labs, Inc. http://www.silabs.com

This file is licensed under the Silabs License Agreement. See the file "Silabs_License_Agreement.txt" for details. Before using this software for any purpose, you must agree to the terms of that agreement.

Definition in file ksz8851snl_spi.c .


       #include <stdio.h>


       #include <stdint.h>


       #include "
       
        ksz8851snl_spi.h
       
       "


       #include "
       
        em_assert.h
       
       "


       #include "
       
        em_common.h
       
       "


       #include "
       
        em_gpio.h
       
       "


       #include "
       
        spidrv.h
       
       "

Macros
#define	ADDRESS_MS2B_POS 0x06

#define	ADDRESS_SHIFT 0x02

#define	BOGUS_BYTE 0xFF

#define	BYTE_ENABLE 0x03

#define	BYTE_ENABLE_SHIFT 0x02

#define	ETH_CS_PIN 3

#define	ETH_CS_PORT gpioPortD

#define	OPCODE_FIFO_READ 0x80

#define	OPCODE_FIFO_WRITE 0xC0

#define	OPCODE_REG_READ 0x00

#define	OPCODE_REG_WRITE 0x40

#define	REG_MASK 0x03

Functions
void	KSZ8851SNL_SPI_Init (void)
	KSZ8851SNL_SPI_Init Initialize SPI interface to Ethernet controller.

void	KSZ8851SNL_SPI_ReadFifo (int numBytes, uint8_t *data)
	Read data from the ethernet controller RX FIFO.

uint16_t	KSZ8851SNL_SPI_ReadRegister (uint8_t reg)
	Read ethernet controller register.

static void	KSZ8851SNL_SPI_Receive (int numBytes, uint8_t *buffer)
	Receive a series of bytes over the spi link.

static void	KSZ8851SNL_SPI_SetChipSelect (bool enable)
	Select/deselect the ksz8851snl chip. This will clear/set the chip select GPIO pin connected to the ksz8851snl. The chip has active low chip select.

static void	KSZ8851SNL_SPI_Transmit (int numBytes, const uint8_t *data)
	Transmits a series of bytes over the spi link.

void	KSZ8851SNL_SPI_WriteFifo (int numBytes, const uint8_t *data)
	Continue writing ethernet controller FIFO.

void	KSZ8851SNL_SPI_WriteFifoBegin (void)
	Start writing to the ethernet controller FIFO.

void	KSZ8851SNL_SPI_WriteFifoEnd (void)
	Stop read/write the ethernet controller FIFO.

void	KSZ8851SNL_SPI_WriteRegister (uint8_t reg, uint16_t value)
	Write ethernet controller register.

Macro Definition Documentation

#define ADDRESS_MS2B_POS 0x06

Most significant 2 Bytes of the address position

Definition at line 30 of file ksz8851snl_spi.c .

Referenced by KSZ8851SNL_SPI_ReadRegister() , and KSZ8851SNL_SPI_WriteRegister() .

#define ADDRESS_SHIFT 0x02

Number of positions to shift the register address

Definition at line 31 of file ksz8851snl_spi.c .

Referenced by KSZ8851SNL_SPI_ReadRegister() , and KSZ8851SNL_SPI_WriteRegister() .

#define BOGUS_BYTE 0xFF

Bogus byte used for receiving via SPI

Definition at line 24 of file ksz8851snl_spi.c .

Referenced by KSZ8851SNL_SPI_Init() .

#define BYTE_ENABLE 0x03

Enable 2 byte register read/write

Definition at line 32 of file ksz8851snl_spi.c .

Referenced by KSZ8851SNL_SPI_ReadRegister() , and KSZ8851SNL_SPI_WriteRegister() .

#define BYTE_ENABLE_SHIFT 0x02

Number of positions to shitf the byte enable bits

Definition at line 33 of file ksz8851snl_spi.c .

Referenced by KSZ8851SNL_SPI_ReadRegister() , and KSZ8851SNL_SPI_WriteRegister() .

#define ETH_CS_PIN 3

SPI CHIP SELECT Pin

Definition at line 37 of file ksz8851snl_spi.c .

Referenced by KSZ8851SNL_SPI_Init() , and KSZ8851SNL_SPI_SetChipSelect() .

#define ETH_CS_PORT gpioPortD

SPI CHIP SELECT Port

Definition at line 38 of file ksz8851snl_spi.c .

Referenced by KSZ8851SNL_SPI_Init() , and KSZ8851SNL_SPI_SetChipSelect() .

#define OPCODE_FIFO_READ 0x80

Opcode for reading from FIFO

Definition at line 28 of file ksz8851snl_spi.c .

Referenced by KSZ8851SNL_SPI_ReadFifo() .

#define OPCODE_FIFO_WRITE 0xC0

Opcode for writing to FIFO

Definition at line 29 of file ksz8851snl_spi.c .

Referenced by KSZ8851SNL_SPI_WriteFifoBegin() .

#define OPCODE_REG_READ 0x00

Opcode for reading a register

Definition at line 26 of file ksz8851snl_spi.c .

Referenced by KSZ8851SNL_SPI_ReadRegister() .

#define OPCODE_REG_WRITE 0x40

Opcode for writing a register

Definition at line 27 of file ksz8851snl_spi.c .

Referenced by KSZ8851SNL_SPI_WriteRegister() .

#define REG_MASK 0x03

Register mask

Definition at line 25 of file ksz8851snl_spi.c .

Referenced by KSZ8851SNL_SPI_ReadRegister() , and KSZ8851SNL_SPI_WriteRegister() .

Function Documentation

static void KSZ8851SNL_SPI_Receive	(	int	`numBytes,`
		uint8_t *	`buffer`
	)

static

Receive a series of bytes over the spi link.

Parameters

[in]	`numBytes`	the number of data bytes to be received
[in]	`buffer`	the destination buffer

Definition at line 111 of file ksz8851snl_spi.c .

References DMADRV_MAX_XFER_COUNT , ECODE_EMDRV_SPIDRV_OK , SL_MIN , and SPIDRV_MReceiveB() .

Referenced by KSZ8851SNL_SPI_ReadFifo() .

static void KSZ8851SNL_SPI_SetChipSelect ( bool enable )

static

Select/deselect the ksz8851snl chip. This will clear/set the chip select GPIO pin connected to the ksz8851snl. The chip has active low chip select.

Parameters

[in] enable true will select the ksz8851snl chip false will deselect the ksz8851snl chip.

Definition at line 139 of file ksz8851snl_spi.c .

References ETH_CS_PIN , ETH_CS_PORT , GPIO_PinOutClear() , and GPIO_PinOutSet() .

Referenced by KSZ8851SNL_SPI_ReadFifo() , KSZ8851SNL_SPI_ReadRegister() , KSZ8851SNL_SPI_WriteFifoBegin() , KSZ8851SNL_SPI_WriteFifoEnd() , and KSZ8851SNL_SPI_WriteRegister() .

static void KSZ8851SNL_SPI_Transmit	(	int	`numBytes,`
		const uint8_t *	`data`
	)

static

Transmits a series of bytes over the spi link.

Parameters

[in]	`numBytes`	the number of data bytes to be transmitted
[in]	`data`	actual data to be transmitted

Definition at line 82 of file ksz8851snl_spi.c .

References DMADRV_MAX_XFER_COUNT , ECODE_EMDRV_SPIDRV_OK , SL_MIN , and SPIDRV_MTransmitB() .

Referenced by KSZ8851SNL_SPI_ReadFifo() , KSZ8851SNL_SPI_WriteFifo() , KSZ8851SNL_SPI_WriteFifoBegin() , and KSZ8851SNL_SPI_WriteRegister() .