ULP GPIO PAD configuration register0 fields.

Public Attributes#

__IOM uint32_t
ULP_PAD_CONFIG_REG0
__IOM uint32_t
PADCONFIG_E1_E2_1

[1..0] Drive strength selector for ULP_GPIO_0 - ULP_GPIO_3

__IOM uint32_t
PADCONFIG_POS_1

[2..2] Power on start enable for ULP_GPIO_0 - ULP_GPIO_3

__IOM uint32_t
PADCONFIG_SMT_1

[3..3] Active high schmitt trigger for ULP_GPIO_0 - ULP_GPIO_3

__IOM uint32_t
RESERVED

[4..4] Reserved

__IOM uint32_t
PADCONFIG_SR_1

[5..5] Slew rate control for ULP_GPIO_0 - ULP_GPIO_3

__IOM uint32_t
PADCONFIG_P1_P2_1

[7..6] Driver disabled state control for ULP_GPIO_0 - ULP_GPIO_3

__IOM uint32_t
PADCONFIG_E1_E2_2

[9..8] Drive strength selector for ULP_GPIO_4 - ULP_GPIO_7

__IOM uint32_t
PADCONFIG_POS_2

[10..10] Power on start enable for ULP_GPIO_4 - ULP_GPIO_7

__IOM uint32_t
PADCONFIG_SMT_2

[11..11] Active high schmitt trigger for ULP_GPIO_4 - ULP_GPIO_7

__IOM uint32_t
RESERVED1

[12..12] Reserved1

__IOM uint32_t
PADCONFIG_SR_2

[13..13] Slew rate control for ULP_GPIO_4 - ULP_GPIO_7

__IOM uint32_t
PADCONFIG_P1_P2_2

[15..14] Driver disabled state control for ULP_GPIO_4 - ULP_GPIO_7

__IOM uint32_t
RESERVED2

[31..16] Reserved2

struct ULP_PAD_CONFIG_Type0::@6::@8
ULP_GPIO_PAD_CONFIG_REG_0
union ULP_PAD_CONFIG_Type0::@6
@7

Public Attribute Documentation#

ULP_PAD_CONFIG_REG0#

__IOM uint32_t ULP_PAD_CONFIG_Type0::ULP_PAD_CONFIG_REG0

Definition at line 328 of file components/siwx917_soc/drivers/unified_api/inc/sl_si91x_gpio_brd4325a.h

PADCONFIG_E1_E2_1#

__IOM uint32_t ULP_PAD_CONFIG_Type0::PADCONFIG_E1_E2_1

[1..0] Drive strength selector for ULP_GPIO_0 - ULP_GPIO_3


Definition at line 331 of file components/siwx917_soc/drivers/unified_api/inc/sl_si91x_gpio_brd4325a.h

PADCONFIG_POS_1#

__IOM uint32_t ULP_PAD_CONFIG_Type0::PADCONFIG_POS_1

[2..2] Power on start enable for ULP_GPIO_0 - ULP_GPIO_3


Definition at line 332 of file components/siwx917_soc/drivers/unified_api/inc/sl_si91x_gpio_brd4325a.h

PADCONFIG_SMT_1#

__IOM uint32_t ULP_PAD_CONFIG_Type0::PADCONFIG_SMT_1

[3..3] Active high schmitt trigger for ULP_GPIO_0 - ULP_GPIO_3


Definition at line 333 of file components/siwx917_soc/drivers/unified_api/inc/sl_si91x_gpio_brd4325a.h

RESERVED#

__IOM uint32_t ULP_PAD_CONFIG_Type0::RESERVED

[4..4] Reserved


Definition at line 334 of file components/siwx917_soc/drivers/unified_api/inc/sl_si91x_gpio_brd4325a.h

PADCONFIG_SR_1#

__IOM uint32_t ULP_PAD_CONFIG_Type0::PADCONFIG_SR_1

[5..5] Slew rate control for ULP_GPIO_0 - ULP_GPIO_3


Definition at line 335 of file components/siwx917_soc/drivers/unified_api/inc/sl_si91x_gpio_brd4325a.h

PADCONFIG_P1_P2_1#

__IOM uint32_t ULP_PAD_CONFIG_Type0::PADCONFIG_P1_P2_1

[7..6] Driver disabled state control for ULP_GPIO_0 - ULP_GPIO_3


Definition at line 336 of file components/siwx917_soc/drivers/unified_api/inc/sl_si91x_gpio_brd4325a.h

PADCONFIG_E1_E2_2#

__IOM uint32_t ULP_PAD_CONFIG_Type0::PADCONFIG_E1_E2_2

[9..8] Drive strength selector for ULP_GPIO_4 - ULP_GPIO_7


Definition at line 337 of file components/siwx917_soc/drivers/unified_api/inc/sl_si91x_gpio_brd4325a.h

PADCONFIG_POS_2#

__IOM uint32_t ULP_PAD_CONFIG_Type0::PADCONFIG_POS_2

[10..10] Power on start enable for ULP_GPIO_4 - ULP_GPIO_7


Definition at line 338 of file components/siwx917_soc/drivers/unified_api/inc/sl_si91x_gpio_brd4325a.h

PADCONFIG_SMT_2#

__IOM uint32_t ULP_PAD_CONFIG_Type0::PADCONFIG_SMT_2

[11..11] Active high schmitt trigger for ULP_GPIO_4 - ULP_GPIO_7


Definition at line 339 of file components/siwx917_soc/drivers/unified_api/inc/sl_si91x_gpio_brd4325a.h

RESERVED1#

__IOM uint32_t ULP_PAD_CONFIG_Type0::RESERVED1

[12..12] Reserved1


Definition at line 340 of file components/siwx917_soc/drivers/unified_api/inc/sl_si91x_gpio_brd4325a.h

PADCONFIG_SR_2#

__IOM uint32_t ULP_PAD_CONFIG_Type0::PADCONFIG_SR_2

[13..13] Slew rate control for ULP_GPIO_4 - ULP_GPIO_7


Definition at line 341 of file components/siwx917_soc/drivers/unified_api/inc/sl_si91x_gpio_brd4325a.h

PADCONFIG_P1_P2_2#

__IOM uint32_t ULP_PAD_CONFIG_Type0::PADCONFIG_P1_P2_2

[15..14] Driver disabled state control for ULP_GPIO_4 - ULP_GPIO_7


Definition at line 342 of file components/siwx917_soc/drivers/unified_api/inc/sl_si91x_gpio_brd4325a.h

RESERVED2#

__IOM uint32_t ULP_PAD_CONFIG_Type0::RESERVED2

[31..16] Reserved2


Definition at line 343 of file components/siwx917_soc/drivers/unified_api/inc/sl_si91x_gpio_brd4325a.h

ULP_GPIO_PAD_CONFIG_REG_0#

struct ULP_PAD_CONFIG_Type0::@6::@8 ULP_PAD_CONFIG_Type0::ULP_GPIO_PAD_CONFIG_REG_0

Definition at line 344 of file components/siwx917_soc/drivers/unified_api/inc/sl_si91x_gpio_brd4325a.h

@7#

union ULP_PAD_CONFIG_Type0::@6 ULP_PAD_CONFIG_Type0::@7

Definition at line 345 of file components/siwx917_soc/drivers/unified_api/inc/sl_si91x_gpio_brd4325a.h