Detailed Description

Clock management unit (CMU) Peripheral API.

This module contains functions for the CMU peripheral of Silicon Labs 32-bit MCUs and SoCs. The CMU module controls oscillators, clocks gates, clock multiplexers, pre-scalers, calibration modules and wait-states.

Data Structures
struct	CMU_DPLLInit_TypeDef

struct	CMU_HFXOInit_TypeDef

struct	CMU_LFXOInit_TypeDef

Macros
#define	CMU_AUXHFRCO_MAX cmuAUXHFRCOFreq_50M0Hz

#define	CMU_AUXHFRCO_MIN cmuAUXHFRCOFreq_1M0Hz

#define	CMU_DPLL_LFXO_TO_40MHZ

#define	CMU_HFRCO_MAX cmuHFRCOFreq_72M0Hz

#define	CMU_HFRCO_MIN cmuHFRCOFreq_1M0Hz

#define	CMU_HFXOINIT_DEFAULT

#define	CMU_HFXOINIT_EXTERNAL_CLOCK

#define	CMU_LFXOINIT_DEFAULT

#define	CMU_LFXOINIT_EXTERNAL_CLOCK

#define	CMU_USHFRCO_MAX cmuUSHFRCOFreq_50M0Hz

#define	CMU_USHFRCO_MIN cmuUSHFRCOFreq_16M0Hz

#define	cmuClkDiv_1 1

#define	cmuClkDiv_1024 1024

#define	cmuClkDiv_128 128

#define	cmuClkDiv_16 16

#define	cmuClkDiv_16384 16384

#define	cmuClkDiv_2 2

#define	cmuClkDiv_2048 2048

#define	cmuClkDiv_256 256

#define	cmuClkDiv_32 32

#define	cmuClkDiv_32768 32768

#define	cmuClkDiv_4 4

#define	cmuClkDiv_4096 4096

#define	cmuClkDiv_512 512

#define	cmuClkDiv_64 64

#define	cmuClkDiv_8 8

#define	cmuClkDiv_8192 8192

Typedefs
typedef uint32_t	CMU_ClkDiv_TypeDef

typedef uint32_t	CMU_ClkPresc_TypeDef

Enumerations
enum	CMU_AUXHFRCOFreq_TypeDef { cmuAUXHFRCOFreq_1M0Hz = 1000000U, cmuAUXHFRCOFreq_2M0Hz = 2000000U, cmuAUXHFRCOFreq_4M0Hz = 4000000U, cmuAUXHFRCOFreq_7M0Hz = 7000000U, cmuAUXHFRCOFreq_13M0Hz = 13000000U, cmuAUXHFRCOFreq_16M0Hz = 16000000U, cmuAUXHFRCOFreq_19M0Hz = 19000000U, cmuAUXHFRCOFreq_26M0Hz = 26000000U, cmuAUXHFRCOFreq_32M0Hz = 32000000U, cmuAUXHFRCOFreq_38M0Hz = 38000000U, cmuAUXHFRCOFreq_48M0Hz = 48000000U, cmuAUXHFRCOFreq_50M0Hz = 50000000U, cmuAUXHFRCOFreq_UserDefined = 0 }

enum	CMU_Clock_TypeDef { cmuClock_HF , cmuClock_DBG , cmuClock_AUX , cmuClock_EXPORT , cmuClock_BUS , cmuClock_CRYPTO0 , cmuClock_LDMA , cmuClock_QSPI0 , cmuClock_GPCRC , cmuClock_GPIO , cmuClock_HFLE , cmuClock_PRS , cmuClock_HFPER , cmuClock_HFPERB , cmuClock_HFPERC , cmuClock_USART0 , cmuClock_USART1 , cmuClock_USART2 , cmuClock_USART3 , cmuClock_USART4 , cmuClock_USART5 , cmuClock_UART0 , cmuClock_UART1 , cmuClock_TIMER0 , cmuClock_TIMER1 , cmuClock_TIMER2 , cmuClock_TIMER3 , cmuClock_TIMER4 , cmuClock_TIMER5 , cmuClock_TIMER6 , cmuClock_WTIMER0 , cmuClock_WTIMER1 , cmuClock_WTIMER2 , cmuClock_WTIMER3 , cmuClock_CRYOTIMER , cmuClock_ACMP0 , cmuClock_ACMP1 , cmuClock_ACMP2 , cmuClock_ACMP3 , cmuClock_VDAC0 , cmuClock_IDAC0 , cmuClock_ADC0 , cmuClock_ADC1 , cmuClock_I2C0 , cmuClock_I2C1 , cmuClock_I2C2 , cmuClock_CSEN_HF , cmuClock_TRNG0 , cmuClock_CAN0 , cmuClock_CAN1 , cmuClock_CORE , cmuClock_EBI , cmuClock_ETH , cmuClock_SDIO , cmuClock_USB , cmuClock_LFA , cmuClock_RTC , cmuClock_LETIMER0 , cmuClock_LETIMER1 , cmuClock_LCDpre , cmuClock_LCD , cmuClock_PCNT0 , cmuClock_PCNT1 , cmuClock_PCNT2 , cmuClock_LESENSE , cmuClock_LFB , cmuClock_LEUART0 , cmuClock_CSEN_LF , cmuClock_LEUART1 , cmuClock_SYSTICK , cmuClock_LFC , cmuClock_USBLE , cmuClock_LFE , cmuClock_RTCC , cmuClock_ADC0ASYNC , cmuClock_ADC1ASYNC , cmuClock_SDIOREF , cmuClock_QSPI0REF }

enum	CMU_DPLLClkSel_TypeDef { cmuDPLLClkSel_Hfxo = _CMU_DPLLCTRL_REFSEL_HFXO, cmuDPLLClkSel_Lfxo = _CMU_DPLLCTRL_REFSEL_LFXO, cmuDPLLClkSel_Clkin0 = _CMU_DPLLCTRL_REFSEL_CLKIN0 }

enum	CMU_DPLLEdgeSel_TypeDef { cmuDPLLEdgeSel_Fall = _CMU_DPLLCTRL_EDGESEL_FALL, cmuDPLLEdgeSel_Rise = _CMU_DPLLCTRL_EDGESEL_RISE }

enum	CMU_DPLLLockMode_TypeDef { cmuDPLLLockMode_Freq = _CMU_DPLLCTRL_MODE_FREQLL, cmuDPLLLockMode_Phase = _CMU_DPLLCTRL_MODE_PHASELL }

enum	CMU_HFRCOFreq_TypeDef { cmuHFRCOFreq_1M0Hz = 1000000U, cmuHFRCOFreq_2M0Hz = 2000000U, cmuHFRCOFreq_4M0Hz = 4000000U, cmuHFRCOFreq_7M0Hz = 7000000U, cmuHFRCOFreq_13M0Hz = 13000000U, cmuHFRCOFreq_16M0Hz = 16000000U, cmuHFRCOFreq_19M0Hz = 19000000U, cmuHFRCOFreq_26M0Hz = 26000000U, cmuHFRCOFreq_32M0Hz = 32000000U, cmuHFRCOFreq_38M0Hz = 38000000U, cmuHFRCOFreq_48M0Hz = 48000000U, cmuHFRCOFreq_56M0Hz = 56000000U, cmuHFRCOFreq_64M0Hz = 64000000U, cmuHFRCOFreq_72M0Hz = 72000000U, cmuHFRCOFreq_UserDefined = 0 }

enum	CMU_HFXOTuningMode_TypeDef { cmuHFXOTuningMode_Auto = 0, cmuHFXOTuningMode_PeakDetectCommand = CMU_CMD_HFXOPEAKDETSTART }

enum	CMU_Osc_TypeDef { cmuOsc_LFXO , cmuOsc_LFRCO , cmuOsc_HFXO , cmuOsc_HFRCO , cmuOsc_AUXHFRCO , cmuOsc_USHFRCO , cmuOsc_ULFRCO , cmuOsc_CLKIN0 }

enum	CMU_OscMode_TypeDef { cmuOscMode_Crystal , cmuOscMode_AcCoupled , cmuOscMode_External }

enum	CMU_Select_TypeDef { cmuSelect_Error , cmuSelect_Disabled , cmuSelect_LFXO , cmuSelect_LFRCO , cmuSelect_HFXO , cmuSelect_HFRCO , cmuSelect_HFCLKLE , cmuSelect_AUXHFRCO , cmuSelect_HFSRCCLK , cmuSelect_HFCLK , cmuSelect_USHFRCO , cmuSelect_HFXOX2 , cmuSelect_ULFRCO , cmuSelect_HFRCODIV2 , cmuSelect_CLKIN0 }

enum	CMU_USHFRCOFreq_TypeDef { cmuUSHFRCOFreq_16M0Hz = 16000000U, cmuUSHFRCOFreq_32M0Hz = 32000000U, cmuUSHFRCOFreq_48M0Hz = 48000000U, cmuUSHFRCOFreq_50M0Hz = 50000000U, cmuUSHFRCOFreq_UserDefined = 0 }

Functions
CMU_AUXHFRCOFreq_TypeDef	CMU_AUXHFRCOBandGet (void)
	Get the current AUXHFRCO frequency.

void	CMU_AUXHFRCOBandSet ( CMU_AUXHFRCOFreq_TypeDef setFreq)
	Set AUXHFRCO calibration for the selected target frequency.

static uint32_t	CMU_AUXHFRCODevinfoGet ( CMU_AUXHFRCOFreq_TypeDef freq)
	Get the AUXHFRCO frequency calibration word in DEVINFO.

__STATIC_INLINE CMU_AUXHFRCOFreq_TypeDef	CMU_AUXHFRCOFreqGet (void)
	Get the current AUXHFRCO frequency.

__STATIC_INLINE void	CMU_AUXHFRCOFreqSet ( CMU_AUXHFRCOFreq_TypeDef setFreq)
	Set AUXHFRCO calibration for the selected target frequency.

uint32_t	CMU_Calibrate (uint32_t HFCycles, CMU_Osc_TypeDef reference)
	Calibrate the clock.

void	CMU_CalibrateConfig (uint32_t downCycles, CMU_Osc_TypeDef downSel, CMU_Osc_TypeDef upSel)
	Configure the clock calibration.

__STATIC_INLINE void	CMU_CalibrateCont (bool enable)
	Configure continuous calibration mode.

uint32_t	CMU_CalibrateCountGet (void)
	Get the calibration count register.

__STATIC_INLINE void	CMU_CalibrateStart (void)
	Start calibration.

__STATIC_INLINE void	CMU_CalibrateStop (void)
	Stop the calibration counters.

CMU_ClkDiv_TypeDef	CMU_ClockDivGet ( CMU_Clock_TypeDef clock)
	Get the clock divisor/prescaler.

void	CMU_ClockDivSet ( CMU_Clock_TypeDef clock, CMU_ClkDiv_TypeDef div)
	Set the clock divisor/prescaler.

void	CMU_ClockEnable ( CMU_Clock_TypeDef clock, bool enable)
	Enable/disable a clock.

uint32_t	CMU_ClockFreqGet ( CMU_Clock_TypeDef clock)
	Get the clock frequency for a clock point.

uint32_t	CMU_ClockPrescGet ( CMU_Clock_TypeDef clock)
	Get the clock prescaler.

void	CMU_ClockPrescSet ( CMU_Clock_TypeDef clock, CMU_ClkPresc_TypeDef presc)
	Set the clock prescaler.

CMU_Select_TypeDef	CMU_ClockSelectGet ( CMU_Clock_TypeDef clock)
	Get the currently selected reference clock used for a clock branch.

void	CMU_ClockSelectSet ( CMU_Clock_TypeDef clock, CMU_Select_TypeDef ref)
	Select the reference clock/oscillator used for a clock branch.

__STATIC_INLINE uint32_t	CMU_DivToLog2 ( CMU_ClkDiv_TypeDef div)
	Convert dividend to logarithmic value. It only works for even numbers equal to 2^n.

bool	CMU_DPLLLock (const CMU_DPLLInit_TypeDef *init)
	Lock the DPLL to a given frequency.

__STATIC_INLINE void	CMU_DPLLUnlock (void)
	Unlock DPLL.

void	CMU_FreezeEnable (bool enable)
	CMU low frequency register synchronization freeze control.

CMU_HFRCOFreq_TypeDef	CMU_HFRCOBandGet (void)
	Get the current HFRCO frequency.

void	CMU_HFRCOBandSet ( CMU_HFRCOFreq_TypeDef setFreq)
	Set the HFRCO calibration for the selected target frequency.

static uint32_t	CMU_HFRCODevinfoGet ( CMU_HFRCOFreq_TypeDef freq)
	Get the HFRCO frequency calibration word in DEVINFO.

__STATIC_INLINE CMU_HFRCOFreq_TypeDef	CMU_HFRCOFreqGet (void)
	Get the current HFRCO frequency.

__STATIC_INLINE void	CMU_HFRCOFreqSet ( CMU_HFRCOFreq_TypeDef setFreq)
	Set HFRCO calibration for the selected target frequency.

void	CMU_HFXOAutostartEnable (uint32_t userSel, bool enEM0EM1Start, bool enEM0EM1StartSel)
	Enable or disable HFXO autostart.

void	CMU_HFXOInit (const CMU_HFXOInit_TypeDef *hfxoInit)
	Set HFXO control registers.

__STATIC_INLINE void	CMU_IntClear (uint32_t flags)
	Clear one or more pending CMU interrupts.

__STATIC_INLINE void	CMU_IntDisable (uint32_t flags)
	Disable one or more CMU interrupts.

__STATIC_INLINE void	CMU_IntEnable (uint32_t flags)
	Enable one or more CMU interrupts.

__STATIC_INLINE uint32_t	CMU_IntGet (void)
	Get pending CMU interrupts.

__STATIC_INLINE uint32_t	CMU_IntGetEnabled (void)
	Get enabled and pending CMU interrupt flags.

__STATIC_INLINE void	CMU_IntSet (uint32_t flags)
	Set one or more pending CMU interrupts.

uint32_t	CMU_LCDClkFDIVGet (void)
	Get the LCD framerate divisor (FDIV) setting.

void	CMU_LCDClkFDIVSet (uint32_t div)
	Set the LCD framerate divisor (FDIV) setting.

void	CMU_LFXOInit (const CMU_LFXOInit_TypeDef *lfxoInit)
	Set LFXO control registers.

__STATIC_INLINE void	CMU_Lock (void)
	Lock the CMU to protect some of its registers against unintended modification.

__STATIC_INLINE uint32_t	CMU_Log2ToDiv (uint32_t log2)
	Convert logarithm of 2 prescaler to division factor.

void	CMU_OscillatorEnable ( CMU_Osc_TypeDef osc, bool enable, bool wait)
	Enable/disable oscillator.

uint32_t	CMU_OscillatorTuningGet ( CMU_Osc_TypeDef osc)
	Get the oscillator frequency tuning setting.

bool	CMU_OscillatorTuningOptimize ( CMU_Osc_TypeDef osc, CMU_HFXOTuningMode_TypeDef mode, bool wait)
	Start and optionally wait for the oscillator tuning optimization.

void	CMU_OscillatorTuningSet ( CMU_Osc_TypeDef osc, uint32_t val)
	Set the oscillator frequency tuning control.

bool	CMU_OscillatorTuningWait ( CMU_Osc_TypeDef osc, CMU_HFXOTuningMode_TypeDef mode)
	Wait for the oscillator tuning optimization.

bool	CMU_PCNTClockExternalGet (unsigned int instance)
	Determine if the currently selected PCNTn clock used is external or LFBCLK.

void	CMU_PCNTClockExternalSet (unsigned int instance, bool external)
	Select the PCNTn clock.

__STATIC_INLINE uint32_t	CMU_PrescToLog2 (uint32_t presc)
	Convert prescaler dividend to a logarithmic value. It only works for even numbers equal to 2^n.

__STATIC_INLINE void	CMU_Unlock (void)
	Unlock the CMU so that writing to locked registers again is possible.

void	CMU_UpdateWaitStates (uint32_t freq, int vscale)

CMU_USHFRCOFreq_TypeDef	CMU_USHFRCOBandGet (void)
	Get the current USHFRCO frequency.

void	CMU_USHFRCOBandSet ( CMU_USHFRCOFreq_TypeDef setFreq)
	Set the USHFRCO calibration for the selected target frequency.

static uint32_t	CMU_USHFRCODevinfoGet ( CMU_USHFRCOFreq_TypeDef freq)
	Get the USHFRCO frequency calibration word in DEVINFO.

uint32_t	CMU_USHFRCOFreqGet (void)
	Get USHFRCO frequency.

Macro Definition Documentation

#define CMU_DPLL_LFXO_TO_40MHZ

Value:

         { \
        
         39998805,
         
          /* Target frequency. */
         
         \
        
         3661,
         
          /* Factor N. */
         
         \
        
         2,
         
          /* Factor M. */
         
         \
        
         0,
         
          /* No spread spectrum clocking. */
         
         \
        
         0,
         
          /* No spread spectrum clocking. */
         
         \
        
         cmuDPLLClkSel_Lfxo,
         
          /* Select LFXO as reference clock. */
         
         \
        
         cmuDPLLEdgeSel_Fall,
         
          /* Select falling edge of ref clock. */
         
         \
        
         cmuDPLLLockMode_Freq,
         
          /* Use frequency lock mode. */
         
         \
        
         true
         
          /* Enable automatic lock recovery. */
         
         \
        
         }

DPLL initialization values for 39,998,805 Hz using LFXO as reference clock, M=2 and N=3661.

Definition at line 2552 of file em_cmu.h .

Referenced by BSP_initClocks() , USBD_Init() , and USBH_Init() .

#define CMU_HFXOINIT_DEFAULT

Value:

         { \
        
         _CMU_HFXOSTARTUPCTRL_CTUNE_DEFAULT, \
        
         _CMU_HFXOSTEADYSTATECTRL_CTUNE_DEFAULT, \
        
         _CMU_HFXOSTARTUPCTRL_IBTRIMXOCORE_DEFAULT, \
        
         _CMU_HFXOSTEADYSTATECTRL_IBTRIMXOCORE_DEFAULT, \
        
         _CMU_HFXOTIMEOUTCTRL_PEAKDETTIMEOUT_DEFAULT, \
        
         _CMU_HFXOTIMEOUTCTRL_STEADYTIMEOUT_DEFAULT, \
        
         _CMU_HFXOTIMEOUTCTRL_STARTUPTIMEOUT_DEFAULT, \
        
         cmuOscMode_Crystal, \
        
         }

Definition at line 2430 of file em_cmu.h .

#define CMU_HFXOINIT_EXTERNAL_CLOCK

Value:

         { \
        
         _CMU_HFXOSTARTUPCTRL_CTUNE_DEFAULT, \
        
         _CMU_HFXOSTEADYSTATECTRL_CTUNE_DEFAULT, \
        
         _CMU_HFXOSTARTUPCTRL_IBTRIMXOCORE_DEFAULT, \
        
         _CMU_HFXOSTEADYSTATECTRL_IBTRIMXOCORE_DEFAULT, \
        
         _CMU_HFXOTIMEOUTCTRL_PEAKDETTIMEOUT_DEFAULT, \
        
         _CMU_HFXOTIMEOUTCTRL_STEADYTIMEOUT_DEFAULT, \
        
         _CMU_HFXOTIMEOUTCTRL_STARTUPTIMEOUT_DEFAULT, \
        
         cmuOscMode_External, \
        
         }

Definition at line 2441 of file em_cmu.h .

#define CMU_LFXOINIT_DEFAULT

Value:

         { \
        
         _CMU_LFXOCTRL_TUNING_DEFAULT,
         
          /* Default CTUNE value, 0 */
         
         \
        
         _CMU_LFXOCTRL_GAIN_DEFAULT,
         
          /* Default gain, 2 */
         
         \
        
         _CMU_LFXOCTRL_TIMEOUT_DEFAULT,
         
          /* Default start-up delay, 32 K cycles */
         
         \
        
         cmuOscMode_Crystal,
         
          /* Crystal oscillator */
         
         \
        
         }

Default LFXO initialization values for platform 2 devices, which contain a separate LFXOCTRL register.

Definition at line 2365 of file em_cmu.h .

#define CMU_LFXOINIT_EXTERNAL_CLOCK

Value:

         { \
        
         0,
         
          /* No CTUNE value needed */
         
         \
        
         0,
         
          /* No LFXO startup gain */
         
         \
        
         _CMU_LFXOCTRL_TIMEOUT_2CYCLES,
         
          /* Minimal lfxo start-up delay, 2 cycles */
         
         \
        
         cmuOscMode_External,
         
          /* External digital clock */
         
         \
        
         }

Definition at line 2372 of file em_cmu.h .

#define cmuClkDiv_1 1

Clock divisors. These values are valid for prescalers. Divide clock by 1.

Definition at line 1086 of file em_cmu.h .

Referenced by CAPLESENSE_setupCMU() , CMU_ClockDivGet() , CMU_ClockDivSet() , and RETARGET_SerialInit() .

#define cmuClkDiv_1024 1024

Divide clock by 1024.

Definition at line 1096 of file em_cmu.h .

#define cmuClkDiv_128 128

Divide clock by 128.

Definition at line 1093 of file em_cmu.h .

Referenced by CMU_ClockDivSet() , and CMU_LCDClkFDIVSet() .

#define cmuClkDiv_16 16

Divide clock by 16.

Definition at line 1090 of file em_cmu.h .

Referenced by CMU_ClockDivGet() , CMU_ClockDivSet() , and CMU_ClockFreqGet() .

#define cmuClkDiv_16384 16384

Divide clock by 16384.

Definition at line 1100 of file em_cmu.h .

#define cmuClkDiv_2 2

Divide clock by 2.

Definition at line 1087 of file em_cmu.h .

#define cmuClkDiv_2048 2048

Divide clock by 2048.

Definition at line 1097 of file em_cmu.h .

#define cmuClkDiv_256 256

Divide clock by 256.

Definition at line 1094 of file em_cmu.h .

Referenced by UDELAY_Calibrate() .

#define cmuClkDiv_32 32

Divide clock by 32.

Definition at line 1091 of file em_cmu.h .

#define cmuClkDiv_32768 32768

Divide clock by 32768.

Definition at line 1101 of file em_cmu.h .

Referenced by CMU_ClockDivSet() .

#define cmuClkDiv_4 4

Divide clock by 4.

Definition at line 1088 of file em_cmu.h .

#define cmuClkDiv_4096 4096

Divide clock by 4096.

Definition at line 1098 of file em_cmu.h .

#define cmuClkDiv_512 512

Divide clock by 512.

Definition at line 1095 of file em_cmu.h .

Referenced by CMU_ClockDivSet() .

#define cmuClkDiv_64 64

Divide clock by 64.

Definition at line 1092 of file em_cmu.h .

#define cmuClkDiv_8 8

Divide clock by 8.

Definition at line 1089 of file em_cmu.h .

Referenced by CMU_ClockDivSet() .

#define cmuClkDiv_8192 8192

Divide clock by 8192.

Definition at line 1099 of file em_cmu.h .

Typedef Documentation

typedef uint32_t CMU_ClkDiv_TypeDef

Clock divider configuration

Definition at line 1104 of file em_cmu.h .

typedef uint32_t CMU_ClkPresc_TypeDef

Clockprescaler configuration

Definition at line 1108 of file em_cmu.h .

Enumeration Type Documentation

enum CMU_AUXHFRCOFreq_TypeDef

AUX high-frequency RCO bands

Enumerator
cmuAUXHFRCOFreq_1M0Hz	1 MHz RC band
cmuAUXHFRCOFreq_2M0Hz	2 MHz RC band
cmuAUXHFRCOFreq_4M0Hz	4 MHz RC band
cmuAUXHFRCOFreq_7M0Hz	7 MHz RC band
cmuAUXHFRCOFreq_13M0Hz	13 MHz RC band
cmuAUXHFRCOFreq_16M0Hz	16 MHz RC band
cmuAUXHFRCOFreq_19M0Hz	19 MHz RC band
cmuAUXHFRCOFreq_26M0Hz	26 MHz RC band
cmuAUXHFRCOFreq_32M0Hz	32 MHz RC band
cmuAUXHFRCOFreq_38M0Hz	38 MHz RC band
cmuAUXHFRCOFreq_48M0Hz	48 MHz RC band
cmuAUXHFRCOFreq_50M0Hz	50 MHz RC band

Definition at line 1205 of file em_cmu.h .

enum CMU_Clock_TypeDef

Clock points in CMU. See CMU overview in the reference manual.

Enumerator
cmuClock_HF	High-frequency clock
cmuClock_DBG	Debug clock
cmuClock_AUX	AUX clock
cmuClock_EXPORT	Export clock
cmuClock_BUS	High-frequency bus clock
cmuClock_CRYPTO0	Cryptography accelerator 0 clock
cmuClock_LDMA	Direct-memory access controller clock
cmuClock_QSPI0	Quad SPI clock
cmuClock_GPCRC	General-purpose cyclic redundancy checksum clock
cmuClock_GPIO	General-purpose input/output clock
cmuClock_HFLE	Low-energy clock divided down from HFBUSCLK
cmuClock_PRS	Peripheral reflex system clock
cmuClock_HFPER	High-frequency peripheral clock
cmuClock_HFPERB	Branch B figh-frequency peripheral clock
cmuClock_HFPERC	Branch C figh-frequency peripheral clock
cmuClock_USART0	Universal sync/async receiver/transmitter 0 clock
cmuClock_USART1	Universal sync/async receiver/transmitter 1 clock
cmuClock_USART2	Universal sync/async receiver/transmitter 2 clock
cmuClock_USART3	Universal sync/async receiver/transmitter 3 clock
cmuClock_USART4	Universal sync/async receiver/transmitter 4 clock
cmuClock_USART5	Universal sync/async receiver/transmitter 5 clock
cmuClock_UART0	Universal async receiver/transmitter 0 clock
cmuClock_UART1	Universal async receiver/transmitter 1 clock
cmuClock_TIMER0	Timer 0 clock
cmuClock_TIMER1	Timer 1 clock
cmuClock_TIMER2	Timer 2 clock
cmuClock_TIMER3	Timer 3 clock
cmuClock_TIMER4	Timer 4 clock
cmuClock_TIMER5	Timer 5 clock
cmuClock_TIMER6	Timer 6 clock
cmuClock_WTIMER0	Wide-timer 0 clock
cmuClock_WTIMER1	Wide-timer 1 clock
cmuClock_WTIMER2	Wide-timer 2 clock
cmuClock_WTIMER3	Wide-timer 3 clock
cmuClock_CRYOTIMER	CRYOtimer clock
cmuClock_ACMP0	Analog comparator 0 clock
cmuClock_ACMP1	Analog comparator 1 clock
cmuClock_ACMP2	Analog comparator 2 clock
cmuClock_ACMP3	Analog comparator 3 clock
cmuClock_VDAC0	Voltage digital-to-analog converter 0 clock
cmuClock_IDAC0	Current digital-to-analog converter 0 clock
cmuClock_ADC0	Analog-to-digital converter 0 clock
cmuClock_ADC1	Analog-to-digital converter 1 clock
cmuClock_I2C0	I2C 0 clock
cmuClock_I2C1	I2C 1 clock
cmuClock_I2C2	I2C 2 clock
cmuClock_CSEN_HF	Capacitive Sense HF clock
cmuClock_TRNG0	True random number generator clock
cmuClock_CAN0	Controller Area Network 0 clock
cmuClock_CAN1	Controller Area Network 1 clock.
cmuClock_CORE	Core clock
cmuClock_EBI	External bus interface clock
cmuClock_ETH	Ethernet clock
cmuClock_SDIO	SDIO clock
cmuClock_USB	USB clock
cmuClock_LFA	Low-frequency A clock
cmuClock_RTC	Real time counter clock
cmuClock_LETIMER0	Low-energy timer 0 clock
cmuClock_LETIMER1	Low-energy timer 1 clock
cmuClock_LCDpre	Liquid crystal display, pre FDIV clock
cmuClock_LCD	Liquid crystal display clock. Note that FDIV prescaler must be set by special API.
cmuClock_PCNT0	Pulse counter 0 clock
cmuClock_PCNT1	Pulse counter 1 clock
cmuClock_PCNT2	Pulse counter 2 clock
cmuClock_LESENSE	LESENSE clock
cmuClock_LFB	Low-frequency B clock
cmuClock_LEUART0	Low-energy universal asynchronous receiver/transmitter 0 clock
cmuClock_CSEN_LF	Capacitive Sense LF clock
cmuClock_LEUART1	Low-energy universal asynchronous receiver/transmitter 1 clock
cmuClock_SYSTICK	Cortex SYSTICK LF clock
cmuClock_LFC	Low-frequency C clock
cmuClock_USBLE	USB LE clock
cmuClock_LFE	Low-frequency E clock
cmuClock_RTCC	Real-time counter and calendar clock
cmuClock_ADC0ASYNC	ADC0 asynchronous clock
cmuClock_ADC1ASYNC	ADC1 asynchronous clock
cmuClock_SDIOREF	SDIO reference clock
cmuClock_QSPI0REF	QSPI0 reference clock

Definition at line 1235 of file em_cmu.h .

enum CMU_DPLLClkSel_TypeDef

DPLL reference clock selector.

Enumerator
cmuDPLLClkSel_Hfxo	HFXO is DPLL reference clock.
cmuDPLLClkSel_Lfxo	LFXO is DPLL reference clock.
cmuDPLLClkSel_Clkin0	CLKIN0 is DPLL reference clock.

Definition at line 2326 of file em_cmu.h .

enum CMU_DPLLEdgeSel_TypeDef

DPLL reference clock edge detect selector.

Enumerator
cmuDPLLEdgeSel_Fall	Detect falling edge of reference clock.
cmuDPLLEdgeSel_Rise	Detect rising edge of reference clock.

Definition at line 2333 of file em_cmu.h .

enum CMU_DPLLLockMode_TypeDef

DPLL lock mode selector.

Enumerator
cmuDPLLLockMode_Freq	Frequency lock mode.
cmuDPLLLockMode_Phase	Phase lock mode.

Definition at line 2339 of file em_cmu.h .

enum CMU_HFRCOFreq_TypeDef

High-frequency system RCO bands

Enumerator
cmuHFRCOFreq_1M0Hz	1 MHz RC band
cmuHFRCOFreq_2M0Hz	2 MHz RC band
cmuHFRCOFreq_4M0Hz	4 MHz RC band
cmuHFRCOFreq_7M0Hz	7 MHz RC band
cmuHFRCOFreq_13M0Hz	13 MHz RC band
cmuHFRCOFreq_16M0Hz	16 MHz RC band
cmuHFRCOFreq_19M0Hz	19 MHz RC band
cmuHFRCOFreq_26M0Hz	26 MHz RC band
cmuHFRCOFreq_32M0Hz	32 MHz RC band
cmuHFRCOFreq_38M0Hz	38 MHz RC band
cmuHFRCOFreq_48M0Hz	48 MHz RC band
cmuHFRCOFreq_56M0Hz	56 MHz RC band
cmuHFRCOFreq_64M0Hz	64 MHz RC band
cmuHFRCOFreq_72M0Hz	72 MHz RC band

Definition at line 1164 of file em_cmu.h .

enum CMU_HFXOTuningMode_TypeDef

HFXO tuning modes

Enumerator
cmuHFXOTuningMode_PeakDetectCommand	Run peak detect optimization only.

Definition at line 2301 of file em_cmu.h .

enum CMU_Osc_TypeDef

Oscillator types.

Enumerator
cmuOsc_LFXO	Low-frequency crystal oscillator.
cmuOsc_LFRCO	Low-frequency RC oscillator.
cmuOsc_HFXO	High-frequency crystal oscillator.
cmuOsc_HFRCO	High-frequency RC oscillator.
cmuOsc_AUXHFRCO	Auxiliary high-frequency RC oscillator.
cmuOsc_USHFRCO	Universal serial high-frequency RC oscillator
cmuOsc_ULFRCO	Ultra low-frequency RC oscillator.
cmuOsc_CLKIN0	External oscillator.

Definition at line 2229 of file em_cmu.h .

enum CMU_OscMode_TypeDef

Oscillator modes.

Enumerator
cmuOscMode_Crystal	Crystal oscillator.
cmuOscMode_AcCoupled	AC-coupled buffer.
cmuOscMode_External	External digital clock.

Definition at line 2250 of file em_cmu.h .

enum CMU_Select_TypeDef

Selectable clock sources.

Enumerator
cmuSelect_Error	Usage error.
cmuSelect_Disabled	Clock selector disabled.
cmuSelect_LFXO	Low-frequency crystal oscillator.
cmuSelect_LFRCO	Low-frequency RC oscillator.
cmuSelect_HFXO	High-frequency crystal oscillator.
cmuSelect_HFRCO	High-frequency RC oscillator.
cmuSelect_HFCLKLE	High-frequency LE clock divided by 2 or 4.
cmuSelect_AUXHFRCO	Auxilliary clock source can be used for debug clock.
cmuSelect_HFSRCCLK	High-frequency source clock.
cmuSelect_HFCLK	Divided HFCLK on Giant for debug clock, undivided on Tiny Gecko and for USBC (not used on Gecko).
cmuSelect_USHFRCO	Universal serial high-frequency RC oscillator.
cmuSelect_HFXOX2	High-frequency crystal oscillator x 2.
cmuSelect_ULFRCO	Ultra low-frequency RC oscillator.
cmuSelect_HFRCODIV2	High-frequency RC oscillator divided by 2.
cmuSelect_CLKIN0	External clock input.

Definition at line 2257 of file em_cmu.h .

enum CMU_USHFRCOFreq_TypeDef

High-USHFRCO bands

Enumerator
cmuUSHFRCOFreq_16M0Hz	16 MHz RC band
cmuUSHFRCOFreq_32M0Hz	32 MHz RC band
cmuUSHFRCOFreq_48M0Hz	48 MHz RC band
cmuUSHFRCOFreq_50M0Hz	50 MHz RC band

Definition at line 1151 of file em_cmu.h .

Function Documentation

CMU_AUXHFRCOFreq_TypeDef CMU_AUXHFRCOBandGet ( void )

Get the current AUXHFRCO frequency.

Returns: AUXHFRCO frequency.

Definition at line 4275 of file em_cmu.c .

Referenced by CMU_AUXHFRCOFreqGet() .

void CMU_AUXHFRCOBandSet ( CMU_AUXHFRCOFreq_TypeDef setFreq )

Set AUXHFRCO calibration for the selected target frequency.

Parameters

[in] setFreq AUXHFRCO frequency to set

Definition at line 4289 of file em_cmu.c .

References BUS_RegBitRead() , CMU_AUXHFRCODevinfoGet() , cmuAUXHFRCOFreq_1M0Hz , cmuAUXHFRCOFreq_2M0Hz , and cmuAUXHFRCOFreq_4M0Hz .

Referenced by CMU_AUXHFRCOFreqSet() .

static uint32_t CMU_AUXHFRCODevinfoGet ( CMU_AUXHFRCOFreq_TypeDef freq )

static

Get the AUXHFRCO frequency calibration word in DEVINFO.

Parameters

[in] freq Frequency in Hz.

Returns: AUXHFRCO calibration word for a given frequency.

Definition at line 4222 of file em_cmu.c .

References cmuAUXHFRCOFreq_13M0Hz , cmuAUXHFRCOFreq_16M0Hz , cmuAUXHFRCOFreq_19M0Hz , cmuAUXHFRCOFreq_1M0Hz , cmuAUXHFRCOFreq_26M0Hz , cmuAUXHFRCOFreq_2M0Hz , cmuAUXHFRCOFreq_32M0Hz , cmuAUXHFRCOFreq_38M0Hz , cmuAUXHFRCOFreq_48M0Hz , cmuAUXHFRCOFreq_4M0Hz , cmuAUXHFRCOFreq_50M0Hz , and cmuAUXHFRCOFreq_7M0Hz .

Referenced by CMU_AUXHFRCOBandSet() .

__STATIC_INLINE CMU_AUXHFRCOFreq_TypeDef CMU_AUXHFRCOFreqGet ( void )

Get the current AUXHFRCO frequency.

Deprecated:: A deprecated function. New code should use CMU_AUXHFRCOBandGet() .

Returns: AUXHFRCO frequency.

Definition at line 2910 of file em_cmu.h .

References CMU_AUXHFRCOBandGet() .

__STATIC_INLINE void CMU_AUXHFRCOFreqSet ( CMU_AUXHFRCOFreq_TypeDef setFreq )

Set AUXHFRCO calibration for the selected target frequency.

Deprecated:: A deprecated function. New code should use CMU_AUXHFRCOBandSet() .

Parameters

[in] setFreq AUXHFRCO frequency to set.

Definition at line 2925 of file em_cmu.h .

References CMU_AUXHFRCOBandSet() .

uint32_t CMU_Calibrate	(	uint32_t	`HFCycles,`
		CMU_Osc_TypeDef	`reference`
	)

Calibrate the clock.

Run a calibration for HFCLK against a selectable reference clock. See the reference manual, CMU chapter, for more details.

Note: This function will not return until the calibration measurement is completed.

Parameters

[in]	`HFCycles`	The number of HFCLK cycles to run the calibration. Increasing this number increases precision but the calibration will take more time.
[in]	`ref`	The reference clock used to compare HFCLK.

Returns: The number of ticks the reference clock after HFCycles ticks on the HF clock.

Definition at line 4350 of file em_cmu.c .

References BUS_RegBitRead() , cmuOsc_AUXHFRCO , cmuOsc_HFRCO , cmuOsc_HFXO , cmuOsc_LFRCO , cmuOsc_LFXO , and cmuOsc_USHFRCO .

void CMU_CalibrateConfig	(	uint32_t	`downCycles,`
		CMU_Osc_TypeDef	`downSel,`
		CMU_Osc_TypeDef	`upSel`
	)

Configure the clock calibration.

Configure a calibration for a selectable clock source against another selectable reference clock. See the reference manual, CMU chapter, for more details.

Note: After configuration, a call to CMU_CalibrateStart() is required and the resulting calibration value can be read out with the CMU_CalibrateCountGet() function call.

Parameters

[in]	`downCycles`	The number of downSel clock cycles to run the calibration. Increasing this number increases precision but the calibration will take more time.
[in]	`downSel`	The clock, which will be counted down downCycles.
[in]	`upSel`	The reference clock; the number of cycles generated by this clock will be counted and added up and the result can be given with the CMU_CalibrateCountGet() function call.

Definition at line 4439 of file em_cmu.c .

References cmuOsc_AUXHFRCO , cmuOsc_HFRCO , cmuOsc_HFXO , cmuOsc_LFRCO , cmuOsc_LFXO , and cmuOsc_USHFRCO .

__STATIC_INLINE void CMU_CalibrateCont ( bool enable )

Configure continuous calibration mode.

Parameters

[in] enable If true, enables continuous calibration, if false disables continuous calibration.

Definition at line 2668 of file em_cmu.h .

References BUS_RegBitWrite() .

uint32_t CMU_CalibrateCountGet ( void )

Get the calibration count register.

Note: If continuous calibration mode is active, calibration busy will almost always be off and only the value needs to be read. In a normal case, this function call is triggered by the CALRDY interrupt flag.

Returns: The calibration count, the number of UPSEL clocks (see CMU_CalibrateConfig() ) in the period of DOWNSEL oscillator clock cycles configured by a previous write operation to CMU->CALCNT.

Definition at line 4547 of file em_cmu.c .

References BUS_RegBitRead() .

__STATIC_INLINE void CMU_CalibrateStart ( void )

Start calibration.

Note: This call is usually invoked after CMU_CalibrateConfig() and possibly CMU_CalibrateCont() .

Definition at line 2681 of file em_cmu.h .

CMU_ClkDiv_TypeDef CMU_ClockDivGet ( CMU_Clock_TypeDef clock )

Get the clock divisor/prescaler.

Parameters

[in] clock A clock point to get the divisor/prescaler for. Notice that not all clock points have a divisor/prescaler. See the CMU overview in the reference manual.

Returns: The current clock point divisor/prescaler. 1 is returned if clock specifies a clock point without a divisor/prescaler.

Definition at line 4582 of file em_cmu.c .

References CMU_ClockPrescGet() , CMU_DivToLog2() , cmuClkDiv_1 , cmuClkDiv_16 , cmuClock_LCDpre , cmuClock_LESENSE , cmuClock_LETIMER0 , cmuClock_LEUART0 , cmuClock_LEUART1 , cmuClock_RTC , and SL_Log2ToDiv() .

Referenced by UDELAY_Calibrate() .

void CMU_ClockDivSet	(	CMU_Clock_TypeDef	`clock,`
		CMU_ClkDiv_TypeDef	`div`
	)

Set the clock divisor/prescaler.

Note: If setting an LF clock prescaler, synchronization into the low-frequency domain is required. If the same register is modified before a previous update has completed, this function will stall until the previous synchronization has completed. See CMU_FreezeEnable() for a suggestion on how to reduce the stalling time in some use cases.

HFCLKLE prescaler is automatically modified when peripherals with clock domain HFBUSCLK is chosen based on the maximum HFLE frequency allowed.

Parameters

[in]	`clock`	Clock point to set divisor/prescaler for. Notice that not all clock points have a divisor/prescaler. See the CMU overview in the reference manual.
[in]	`div`	The clock divisor to use (<= cmuClkDiv_512).

Definition at line 4713 of file em_cmu.c .

References CMU_ClockPrescSet() , CMU_DivToLog2() , cmuClkDiv_1 , cmuClkDiv_128 , cmuClkDiv_16 , cmuClkDiv_32768 , cmuClkDiv_512 , cmuClkDiv_8 , cmuClock_LCDpre , cmuClock_LESENSE , cmuClock_LETIMER0 , cmuClock_LEUART0 , cmuClock_LEUART1 , cmuClock_RTC , SystemCoreClockGet() , and SystemHFClockGet() .

Referenced by CAPLESENSE_setupCMU() , RETARGET_SerialInit() , RTCDRV_Init() , SegmentLCD_Init() , UARTDRV_InitLeuart() , and UDELAY_Calibrate() .

void CMU_ClockEnable	(	CMU_Clock_TypeDef	`clock,`
		bool	`enable`
	)

Enable/disable a clock.

In general, module clocking is disabled after a reset. If a module clock is disabled, the registers of that module are not accessible and reading from such registers may return undefined values. Writing to registers of clock-disabled modules has no effect. Avoid accessing module registers of a module with a disabled clock.

Note: If enabling/disabling an LF clock, synchronization into the low-frequency domain is required. If the same register is modified before a previous update has completed, this function will stall until the previous synchronization has completed. See CMU_FreezeEnable() for a suggestion on how to reduce the stalling time in some use cases.

HFCLKLE prescaler is automatically modified when peripherals with clock domain HFBUSCLK is chosen based on the maximum HFLE frequency allowed.

Parameters

[in]	`clock`	The clock to enable/disable. Notice that not all defined clock points have separate enable/disable control. See the CMU overview in the reference manual.
[in]	`enable`	true - enable specified clock. false - disable specified clock.

Definition at line 4921 of file em_cmu.c .

References BUS_RegBitWrite() , CMU_ClockFreqGet() , and cmuClock_HFLE .

Referenced by adcInit() , BOARD_init() , BSP_BccDeInit() , BSP_BccInit() , BSP_BusControlModeSet() , BSP_EbiInit() , BSP_initBoard() , BSP_McuBoard_Init() , CAPLESENSE_setupCMU() , CAPSENSE_Init() , DMADRV_DeInit() , ezradio_hal_GpioInit() , gpioInit() , I2CSPM_Init() , ICM20648_spiInit() , initEbiCommon() , initGpio() , LDMA_DeInit() , LDMA_Init() , MIC_init() , MICROSD_Init() , MICROSD_PowerOff() , MICROSD_PowerOn() , mscEccReadWriteExistingDma() , MSDD_Init() , RETARGET_SerialInit() , RTCDRV_DeInit() , RTCDRV_Init() , SegmentLCD_Disable() , SegmentLCD_Init() , SPI_TFT_Init() , SPIDRV_DeInit() , SPIDRV_Init() , TOUCH_Init() , UARTDRV_DeInit() , UARTDRV_InitLeuart() , UARTDRV_InitUart() , UDELAY_Calibrate() , USBD_Init() , USBTIMER_Init() , USTIMER_DeInit() , USTIMER_Init() , VDDCHECK_Disable() , and VDDCHECK_Init() .

uint32_t CMU_ClockFreqGet ( CMU_Clock_TypeDef clock )

Get the clock frequency for a clock point.

Parameters

[in] clock A clock point to fetch the frequency for.

Returns: The current frequency in Hz.

Definition at line 5045 of file em_cmu.c .

References CMU_DivToLog2() , cmuClkDiv_16 , cmuClock_LFA , cmuClock_LFB , cmuClock_LFC , cmuClock_LFE , SL_Log2ToDiv() , SystemCoreClockGet() , and SystemHFClockGet() .

Referenced by ADC_Init() , ADC_PrescaleCalc() , ADC_TimebaseCalc() , BSP_TraceProfilerSetup() , CAN_GetClockFrequency() , CMU_ClockEnable() , CMU_ClockPrescSet() , CMU_ClockSelectSet() , CMU_DPLLLock() , CMU_HFRCOBandSet() , I2C_BusFreqGet() , I2C_BusFreqSet() , LESENSE_ScanFreqSet() , LEUART_BaudrateGet() , LEUART_BaudrateSet() , MIC_init() , MSC_Init() , UARTDRV_InitLeuart() , USART_BaudrateAsyncSet() , USART_BaudrateGet() , USART_BaudrateSyncSet() , USBTIMER_Init() , USTIMER_Init() , UTIL_init() , and VDAC_PrescaleCalc() .

uint32_t CMU_ClockPrescGet ( CMU_Clock_TypeDef clock )

Get the clock prescaler.

Parameters

[in] clock A clock point to get the prescaler for. Notice that not all clock points have a prescaler. See the CMU overview in the reference manual.

Returns: The prescaler value of the current clock point. 0 is returned if clock specifies a clock point without a prescaler.

Definition at line 5333 of file em_cmu.c .

References cmuClock_ADC0ASYNC , cmuClock_ADC1ASYNC , cmuClock_CSEN_LF , cmuClock_LCD , cmuClock_LCDpre , cmuClock_LESENSE , cmuClock_LETIMER0 , cmuClock_LETIMER1 , cmuClock_LEUART0 , cmuClock_LEUART1 , cmuClock_RTC , cmuClock_RTCC , and SL_Log2ToDiv() .

Referenced by CMU_ClockDivGet() .

void CMU_ClockPrescSet	(	CMU_Clock_TypeDef	`clock,`
		CMU_ClkPresc_TypeDef	`presc`
	)

Set the clock prescaler.

Note: If setting an LF clock prescaler, synchronization into the low-frequency domain is required. If the same register is modified before a previous update has completed, this function will stall until the previous synchronization has completed. See CMU_FreezeEnable() for a suggestion on how to reduce the stalling time in some use cases.

HFCLKLE prescaler is automatically modified when peripherals with clock domain HFBUSCLK is chosen based on the maximum HFLE frequency allowed.

Parameters

[in]	`clock`	A clock point to set the prescaler for. Notice that not all clock points have a prescaler. See the CMU overview in the reference manual.
[in]	`presc`	The clock prescaler.

Definition at line 5546 of file em_cmu.c .

References CMU_ClockFreqGet() , CMU_PrescToLog2() , cmuClock_ADC0ASYNC , cmuClock_ADC1ASYNC , cmuClock_CSEN_LF , cmuClock_HFLE , cmuClock_LCD , cmuClock_LCDpre , cmuClock_LESENSE , cmuClock_LETIMER0 , cmuClock_LETIMER1 , cmuClock_LEUART0 , cmuClock_LEUART1 , cmuClock_RTC , cmuClock_RTCC , and SystemCoreClockGet() .

Referenced by CMU_ClockDivSet() .

CMU_Select_TypeDef CMU_ClockSelectGet ( CMU_Clock_TypeDef clock )

Get the currently selected reference clock used for a clock branch.

Parameters

[in]


              clock

Clock branch to fetch selected ref. clock for. One of:

Returns: The reference clock used for clocking the selected branch, cmuSelect_Error if invalid clock provided.

Definition at line 5880 of file em_cmu.c .

References cmuSelect_AUXHFRCO , cmuSelect_CLKIN0 , cmuSelect_Disabled , cmuSelect_Error , cmuSelect_HFCLK , cmuSelect_HFCLKLE , cmuSelect_HFRCO , cmuSelect_HFRCODIV2 , cmuSelect_HFSRCCLK , cmuSelect_HFXO , cmuSelect_HFXOX2 , cmuSelect_LFRCO , cmuSelect_LFXO , cmuSelect_ULFRCO , and cmuSelect_USHFRCO .

Referenced by CMU_DPLLLock() , CMU_HFRCOBandSet() , CMU_HFXOInit() , CMU_LFXOInit() , UDELAY_Calibrate() , and USBD_Init() .

void CMU_ClockSelectSet	(	CMU_Clock_TypeDef	`clock,`
		CMU_Select_TypeDef	`ref`
	)

Select the reference clock/oscillator used for a clock branch.

Notice that if a selected reference is not enabled prior to selecting its use, it will be enabled and this function will wait for the selected oscillator to be stable. It will however NOT be disabled if another reference clock is selected later.

This feature is particularly important if selecting a new reference clock for the clock branch clocking the core. Otherwise, the system may halt.

Note: HFCLKLE prescaler is automatically modified when peripherals with clock domain HFBUSCLK is chosen based on the maximum HFLE frequency allowed.

Parameters

[in]	`clock`	A clock branch to select reference clock for. One of: cmuClock_HF cmuClock_LFA cmuClock_LFB cmuClock_DBG
[in]	`ref`	A reference selected for clocking. See the reference manual for details about references available for a specific clock branch. cmuSelect_HFRCO cmuSelect_LFRCO cmuSelect_HFXO cmuSelect_LFXO cmuSelect_HFCLKLE cmuSelect_AUXHFRCO cmuSelect_HFCLK cmuSelect_ULFRCO

Definition at line 6443 of file em_cmu.c .

References BUS_RegBitWrite() , CMU_ClockFreqGet() , CMU_HFRCOBandGet() , CMU_OscillatorEnable() , cmuClock_HF , cmuClock_HFLE , cmuOsc_AUXHFRCO , cmuOsc_CLKIN0 , cmuOsc_HFRCO , cmuOsc_HFXO , cmuOsc_LFRCO , cmuOsc_LFXO , cmuOsc_USHFRCO , cmuSelect_AUXHFRCO , cmuSelect_CLKIN0 , cmuSelect_Disabled , cmuSelect_HFCLK , cmuSelect_HFCLKLE , cmuSelect_HFRCO , cmuSelect_HFRCODIV2 , cmuSelect_HFSRCCLK , cmuSelect_HFXO , cmuSelect_HFXOX2 , cmuSelect_LFRCO , cmuSelect_LFXO , cmuSelect_ULFRCO , cmuSelect_USHFRCO , EMU_VScaleEM01ByClock() , EMU_VScaleWait() , SL_FALLTHROUGH , SystemCoreClockGet() , and SystemHFXOClockGet() .

Referenced by BSP_BccInit() , BSP_initClocks() , CAPLESENSE_setupCMU() , MIC_init() , RETARGET_SerialInit() , RTCDRV_Init() , SegmentLCD_Init() , UARTDRV_InitLeuart() , UDELAY_Calibrate() , USBD_Init() , and USBH_Init() .

__STATIC_INLINE uint32_t CMU_DivToLog2 ( CMU_ClkDiv_TypeDef div )

Convert dividend to logarithmic value. It only works for even numbers equal to 2^n.

Parameters

[in] div An unscaled dividend.

Returns: Logarithm of 2, as used by fixed prescalers.

Definition at line 2708 of file em_cmu.h .

Referenced by CMU_ClockDivGet() , CMU_ClockDivSet() , CMU_ClockFreqGet() , and RTCDRV_Init() .

bool CMU_DPLLLock ( const CMU_DPLLInit_TypeDef * init )

Lock the DPLL to a given frequency.

The frequency is given by: Fout = Fref * (N+1) / (M+1).

Note: This function does not check if the given N & M values will actually produce the desired target frequency.
N & M limitations:
300 < N <= 4095
0 <= M <= 4095
Any peripheral running off HFRCO should be switched to HFRCODIV2 prior to calling this function to avoid over-clocking.

HFCLKLE prescaler is automatically modified before updating HFRCO based on the maximum HFLE frequency allowed.

Parameters

[in] init DPLL setup parameters.

Returns: Returns false on invalid target frequency or DPLL locking error.

Definition at line 7175 of file em_cmu.c .

Referenced by BSP_initClocks() , USBD_Init() , and USBH_Init() .

__STATIC_INLINE void CMU_DPLLUnlock ( void )

Unlock DPLL.

Note: HFRCO is not turned off.

Definition at line 2728 of file em_cmu.h .

void CMU_FreezeEnable ( bool enable )

CMU low frequency register synchronization freeze control.

Some CMU registers require synchronization into the low-frequency (LF) domain. The freeze feature allows for several such registers to be modified before passing them to the LF domain simultaneously (which takes place when the freeze mode is disabled).

Another use case for this feature is using an API (such as the CMU API) for modifying several bit fields consecutively in the same register. If freeze mode is enabled during this sequence, stalling can be avoided.

Note: When enabling freeze mode, this function will wait for all current ongoing CMU synchronization to LF domain to complete (normally synchronization will not be in progress.) However, for this reason, when using freeze mode, modifications of registers requiring LF synchronization should be done within one freeze enable/disable block to avoid unnecessary stalling.

Parameters

[in]


              enable

true - enable freeze, modified registers are not propagated to the LF domain
false - disable freeze, modified registers are propagated to the LF domain

Definition at line 7331 of file em_cmu.c .

CMU_HFRCOFreq_TypeDef CMU_HFRCOBandGet ( void )

Get the current HFRCO frequency.

Returns: HFRCO frequency.

Definition at line 7523 of file em_cmu.c .

References SystemHfrcoFreq .

Referenced by CMU_ClockSelectSet() , and CMU_HFRCOFreqGet() .

void CMU_HFRCOBandSet ( CMU_HFRCOFreq_TypeDef setFreq )

Set the HFRCO calibration for the selected target frequency.

Note: HFCLKLE prescaler is automatically modified based on the maximum HFLE frequency allowed.

Parameters

[in] setFreq HFRCO frequency to set.

Definition at line 7539 of file em_cmu.c .

References BUS_RegBitRead() , CMU_ClockFreqGet() , CMU_ClockSelectGet() , CMU_HFRCODevinfoGet() , cmuClock_HF , cmuClock_HFLE , cmuHFRCOFreq_1M0Hz , cmuHFRCOFreq_2M0Hz , cmuHFRCOFreq_4M0Hz , cmuSelect_HFRCO , EMU_VScaleEM01ByClock() , SystemCoreClockGet() , and SystemHfrcoFreq .

Referenced by CMU_HFRCOFreqSet() .

static uint32_t CMU_HFRCODevinfoGet ( CMU_HFRCOFreq_TypeDef freq )

static

Get the HFRCO frequency calibration word in DEVINFO.

Parameters

[in] freq Frequency in Hz.

Returns: HFRCO calibration word for a given frequency.

Definition at line 7461 of file em_cmu.c .

References cmuHFRCOFreq_13M0Hz , cmuHFRCOFreq_16M0Hz , cmuHFRCOFreq_19M0Hz , cmuHFRCOFreq_1M0Hz , cmuHFRCOFreq_26M0Hz , cmuHFRCOFreq_2M0Hz , cmuHFRCOFreq_32M0Hz , cmuHFRCOFreq_38M0Hz , cmuHFRCOFreq_48M0Hz , cmuHFRCOFreq_4M0Hz , cmuHFRCOFreq_56M0Hz , cmuHFRCOFreq_64M0Hz , cmuHFRCOFreq_72M0Hz , and cmuHFRCOFreq_7M0Hz .

Referenced by CMU_DPLLLock() , and CMU_HFRCOBandSet() .

__STATIC_INLINE CMU_HFRCOFreq_TypeDef CMU_HFRCOFreqGet ( void )

Get the current HFRCO frequency.

Deprecated:: A deprecated function. New code should use CMU_HFRCOBandGet() .

Returns: HFRCO frequency.

Definition at line 2878 of file em_cmu.h .

References CMU_HFRCOBandGet() .

__STATIC_INLINE void CMU_HFRCOFreqSet ( CMU_HFRCOFreq_TypeDef setFreq )

Set HFRCO calibration for the selected target frequency.

Deprecated:: A deprecated function. New code should use CMU_HFRCOBandSet() .

Parameters

[in] setFreq HFRCO frequency to set.

Definition at line 2893 of file em_cmu.h .

References CMU_HFRCOBandSet() .

void CMU_HFXOAutostartEnable	(	uint32_t	`userSel,`
		bool	`enEM0EM1Start,`
		bool	`enEM0EM1StartSel`
	)

Enable or disable HFXO autostart.

Parameters

[in]	`userSel`	Additional user specified enable bit.
[in]	`enEM0EM1Start`	If true, HFXO is automatically started upon entering EM0/EM1 entry from EM2/EM3. HFXO selection has to be handled by the user. If false, HFXO is not started automatically when entering EM0/EM1.
[in]	`enEM0EM1StartSel`	If true, HFXO is automatically started and immediately selected upon entering EM0/EM1 entry from EM2/EM3. Note that this option stalls the use of HFSRCCLK until HFXO becomes ready. HFCLKLE prescaler is also automatically modified if userSel is specified. If false, HFXO is not started or selected automatically when entering EM0/EM1.

Definition at line 7767 of file em_cmu.c .

References CMU_OscillatorEnable() , cmuOsc_HFXO , EMU_VScaleEM01ByClock() , and SystemHFXOClockGet() .

Referenced by BSP_initClocks() .

void CMU_HFXOInit ( const CMU_HFXOInit_TypeDef * hfxoInit )

Set HFXO control registers.

Note: HFXO configuration should be obtained from a configuration tool, app note, or xtal data sheet. This function disables the HFXO to ensure a valid state before update.

Parameters

[in] hfxoInit HFXO setup parameters.

Definition at line 7830 of file em_cmu.c .

References BUS_RegBitWrite() , CMU_ClockSelectGet() , CMU_OscillatorEnable() , cmuClock_HF , cmuOsc_HFXO , cmuOscMode_AcCoupled , cmuOscMode_Crystal , cmuOscMode_External , cmuSelect_HFXO , CMU_HFXOInit_TypeDef::ctuneStartup , CMU_HFXOInit_TypeDef::ctuneSteadyState , CMU_HFXOInit_TypeDef::mode , SystemHFXOClockGet() , CMU_HFXOInit_TypeDef::timeoutPeakDetect , CMU_HFXOInit_TypeDef::timeoutStartup , CMU_HFXOInit_TypeDef::timeoutSteady , CMU_HFXOInit_TypeDef::xoCoreBiasTrimStartup , and CMU_HFXOInit_TypeDef::xoCoreBiasTrimSteadyState .

Referenced by BSP_initClocks() .

__STATIC_INLINE void CMU_IntClear ( uint32_t flags )

Clear one or more pending CMU interrupts.

Parameters

[in] flags CMU interrupt sources to clear.

Definition at line 2741 of file em_cmu.h .

__STATIC_INLINE void CMU_IntDisable ( uint32_t flags )

Disable one or more CMU interrupts.

Parameters

[in] flags CMU interrupt sources to disable.

Definition at line 2753 of file em_cmu.h .

__STATIC_INLINE void CMU_IntEnable ( uint32_t flags )

Enable one or more CMU interrupts.

Note: Depending on use case, a pending interrupt may already be set prior to enabling the interrupt. Consider using CMU_IntClear() prior to enabling if the pending interrupt should be ignored.

Parameters

[in] flags CMU interrupt sources to enable.

Definition at line 2770 of file em_cmu.h .

__STATIC_INLINE uint32_t CMU_IntGet ( void )

Get pending CMU interrupts.

Returns: CMU interrupt sources pending.

Definition at line 2782 of file em_cmu.h .

__STATIC_INLINE uint32_t CMU_IntGetEnabled ( void )

Get enabled and pending CMU interrupt flags.

Useful for handling more interrupt sources in the same interrupt handler.

Note: This function does not clear event bits.

Returns

Pending and enabled CMU interrupt sources. The return value is the bitwise AND of

the enabled interrupt sources in CMU_IEN and
the pending interrupt flags CMU_IF

Definition at line 2803 of file em_cmu.h .

__STATIC_INLINE void CMU_IntSet ( uint32_t flags )

Set one or more pending CMU interrupts.

Parameters

[in] flags CMU interrupt sources to set to pending.

Definition at line 2818 of file em_cmu.h .

uint32_t CMU_LCDClkFDIVGet ( void )

Get the LCD framerate divisor (FDIV) setting.

Returns: The LCD framerate divisor.

Definition at line 7968 of file em_cmu.c .

void CMU_LCDClkFDIVSet ( uint32_t div )

Set the LCD framerate divisor (FDIV) setting.

Note: The FDIV field (CMU LCDCTRL register) should only be modified while the LCD module is clock disabled (CMU LFACLKEN0.LCD bit is 0). This function will NOT modify FDIV if the LCD module clock is enabled. See CMU_ClockEnable() for disabling/enabling LCD clock.

Parameters

[in] div The FDIV setting to use.

Definition at line 7990 of file em_cmu.c .

References cmuClkDiv_128 .

Referenced by SegmentLCD_Init() .

void CMU_LFXOInit ( const CMU_LFXOInit_TypeDef * lfxoInit )

Set LFXO control registers.

Note: LFXO configuration should be obtained from a configuration tool, app note, or xtal data sheet. This function disables the LFXO when necessary to ensure a valid state before update.

Parameters

[in] lfxoInit LFXO setup parameters.

Definition at line 8020 of file em_cmu.c .

References BUS_RegBitWrite() , BUS_RegMaskedWrite() , CMU_ClockSelectGet() , CMU_OscillatorEnable() , cmuClock_HF , cmuOsc_LFXO , cmuSelect_LFXO , CMU_LFXOInit_TypeDef::ctune , CMU_LFXOInit_TypeDef::gain , CMU_LFXOInit_TypeDef::mode , and CMU_LFXOInit_TypeDef::timeout .

Referenced by BSP_initClocks() .

__STATIC_INLINE void CMU_Lock ( void )

Lock the CMU to protect some of its registers against unintended modification.

See the reference manual for CMU registers that will be locked.

Note: If locking the CMU registers, they must be unlocked prior to using any CMU API functions modifying CMU registers protected by the lock.

Definition at line 2836 of file em_cmu.h .

Referenced by EMU_EnterEM3() .

__STATIC_INLINE uint32_t CMU_Log2ToDiv ( uint32_t log2 )

Convert logarithm of 2 prescaler to division factor.

Deprecated:

Deprecated and marked for removal in a later release. It will be replaced by SL_Log2ToDiv.

Parameters

[in] log2 Logarithm of 2, as used by fixed prescalers.

Returns: Dividend.

Definition at line 2853 of file em_cmu.h .

References SL_Log2ToDiv() .

void CMU_OscillatorEnable	(	CMU_Osc_TypeDef	`osc,`
		bool	`enable,`
		bool	`wait`
	)

Enable/disable oscillator.

Note: WARNING: When this function is called to disable either cmuOsc_LFXO or cmuOsc_HFXO, the LFXOMODE or HFXOMODE fields of the CMU_CTRL register are reset to the reset value. In other words, if external clock sources are selected in either LFXOMODE or HFXOMODE fields, the configuration will be cleared and needs to be reconfigured if needed later.

Parameters

[in]	`osc`	The oscillator to enable/disable.
[in]	`enable`	true - enable specified oscillator. false - disable specified oscillator.
[in]	`wait`	Only used if `enable` is true. true - wait for oscillator start-up time to timeout before returning. false - do not wait for oscillator start-up time to timeout before returning.

Definition at line 8087 of file em_cmu.c .

References BUS_RegBitRead() , CMU_OscillatorTuningGet() , CMU_OscillatorTuningOptimize() , CMU_OscillatorTuningSet() , CMU_OscillatorTuningWait() , cmuOsc_AUXHFRCO , cmuOsc_HFRCO , cmuOsc_HFXO , cmuOsc_LFRCO , cmuOsc_LFXO , and cmuOsc_USHFRCO .

Referenced by BSP_initClocks() , CMU_ClockSelectSet() , CMU_HFXOAutostartEnable() , CMU_HFXOInit() , CMU_LFXOInit() , DBG_SWOEnable() , UDELAY_Calibrate() , USBD_Init() , and USBH_Init() .

uint32_t CMU_OscillatorTuningGet ( CMU_Osc_TypeDef osc )

Get the oscillator frequency tuning setting.

Parameters

[in]

osc

An oscillator to get tuning value for, one of the following:

cmuOsc_LFRCO
cmuOsc_HFRCO
cmuOsc_AUXHFRCO
cmuOsc_HFXO if CMU_HFXOCTRL_PEAKDETSHUNTOPTMODE is defined

Returns: The oscillator frequency tuning setting in use.

Definition at line 8276 of file em_cmu.c .

References cmuOsc_AUXHFRCO , cmuOsc_HFRCO , cmuOsc_HFXO , cmuOsc_LFRCO , and cmuOsc_USHFRCO .

Referenced by CMU_OscillatorEnable() .

bool CMU_OscillatorTuningOptimize	(	CMU_Osc_TypeDef	`osc,`
		CMU_HFXOTuningMode_TypeDef	`mode,`
		bool	`wait`
	)

Start and optionally wait for the oscillator tuning optimization.

Parameters

[in]	`osc`	An oscillator to set tuning value for, one of the following: cmuOsc_HFXO
[in]	`mode`	Tuning optimization mode.
[in]	`wait`	Wait for tuning optimization to complete. true - wait for tuning optimization to complete. false - return without waiting.

Returns: Returns false on invalid parameters or oscillator error status.

Definition at line 8520 of file em_cmu.c .

References CMU_OscillatorTuningWait() , and cmuOsc_HFXO .

Referenced by CMU_OscillatorEnable() .

void CMU_OscillatorTuningSet	(	CMU_Osc_TypeDef	`osc,`
		uint32_t	`val`
	)

Set the oscillator frequency tuning control.

Note: Oscillator tuning is done during production and the tuning value is automatically loaded after reset. Changing the tuning value from the calibrated value is for more advanced use. Certain oscillators also have build-in tuning optimization.

Parameters

[in]	`osc`	An oscillator to set tuning value for, one of the following: cmuOsc_LFRCO cmuOsc_HFRCO cmuOsc_AUXHFRCO cmuOsc_HFXO if PEAKDETSHUNTOPTMODE is available. Note that CMD mode is set.
[in]	`val`	The oscillator frequency tuning setting to use.

Definition at line 8344 of file em_cmu.c .

References BUS_RegBitRead() , cmuOsc_AUXHFRCO , cmuOsc_HFRCO , cmuOsc_HFXO , cmuOsc_LFRCO , and cmuOsc_USHFRCO .

Referenced by CMU_OscillatorEnable() .

bool CMU_OscillatorTuningWait	(	CMU_Osc_TypeDef	`osc,`
		CMU_HFXOTuningMode_TypeDef	`mode`
	)

Wait for the oscillator tuning optimization.

Parameters

[in]	`osc`	An oscillator to set tuning value for, one of the following: cmuOsc_HFXO
[in]	`mode`	Tuning optimization mode.

Returns: Returns false on invalid parameters or oscillator error status.

Definition at line 8454 of file em_cmu.c .

References cmuOsc_HFXO .

Referenced by CMU_OscillatorEnable() , and CMU_OscillatorTuningOptimize() .

bool CMU_PCNTClockExternalGet ( unsigned int instance )

Determine if the currently selected PCNTn clock used is external or LFBCLK.

Parameters

[in] instance PCNT instance number to get currently selected clock source for.

Returns

true - selected clock is external clock.
false - selected clock is LFBCLK.

Definition at line 8557 of file em_cmu.c .

void CMU_PCNTClockExternalSet	(	unsigned int	`instance,`
		bool	`external`
	)

Select the PCNTn clock.

Parameters

[in]	`instance`	PCNT instance number to set selected clock source for.
[in]	`external`	Set to true to select the external clock, false to select LFBCLK.

Definition at line 8597 of file em_cmu.c .

References BUS_RegBitWrite() .

Referenced by PCNT_Init() , and PCNT_Reset() .

__STATIC_INLINE uint32_t CMU_PrescToLog2 ( uint32_t presc )

Convert prescaler dividend to a logarithmic value. It only works for even numbers equal to 2^n.

Parameters

[in] presc An unscaled dividend (dividend = presc + 1).

Returns: Logarithm of 2, as used by fixed 2^n prescalers.

Definition at line 2945 of file em_cmu.h .

References SL_Log2ToDiv() .

Referenced by CMU_ClockPrescSet() .

CMU_USHFRCOFreq_TypeDef CMU_USHFRCOBandGet ( void )

Get the current USHFRCO frequency.

Returns: HFRCO frequency.

Definition at line 7705 of file em_cmu.c .

void CMU_USHFRCOBandSet ( CMU_USHFRCOFreq_TypeDef setFreq )

Set the USHFRCO calibration for the selected target frequency.

Parameters

[in] setFreq USHFRCO frequency to set.

Definition at line 7729 of file em_cmu.c .

References BUS_RegBitRead() , and CMU_USHFRCODevinfoGet() .

Referenced by USBD_Init() , and USBH_Init() .

static uint32_t CMU_USHFRCODevinfoGet ( CMU_USHFRCOFreq_TypeDef freq )

static

Get the USHFRCO frequency calibration word in DEVINFO.

Parameters

[in] freq Frequency in Hz.

Returns: USHFRCO calibration word for a given frequency.

Definition at line 7678 of file em_cmu.c .

References cmuUSHFRCOFreq_16M0Hz , cmuUSHFRCOFreq_32M0Hz , cmuUSHFRCOFreq_48M0Hz , and cmuUSHFRCOFreq_50M0Hz .

Referenced by CMU_USHFRCOBandSet() .

uint32_t CMU_USHFRCOFreqGet ( void )

Get USHFRCO frequency.

Returns: USHFRCO frequency.

Definition at line 7717 of file em_cmu.c .

CMUEMLIB

Detailed Description

Data Structures

Macros

Typedefs

Enumerations

Functions

Macro Definition Documentation

Typedef Documentation

Enumeration Type Documentation

Function Documentation