Detailed Description

Clock management unit (CMU) Peripheral API.

This module contains functions to control the CMU peripheral of Silicon Labs 32-bit MCUs and SoCs. The CMU controls oscillators and clocks.

Data Structures
struct	CMU_HFXOInit_TypeDef

struct	CMU_LFXOInit_TypeDef

Macros
#define	CMU_HFXOINIT_DEFAULT

#define	CMU_HFXOINIT_EXTERNAL_CLOCK

#define	CMU_LFXOINIT_DEFAULT

#define	CMU_LFXOINIT_EXTERNAL_CLOCK

#define	cmuClkDiv_1 1

#define	cmuClkDiv_1024 1024

#define	cmuClkDiv_128 128

#define	cmuClkDiv_16 16

#define	cmuClkDiv_16384 16384

#define	cmuClkDiv_2 2

#define	cmuClkDiv_2048 2048

#define	cmuClkDiv_256 256

#define	cmuClkDiv_32 32

#define	cmuClkDiv_32768 32768

#define	cmuClkDiv_4 4

#define	cmuClkDiv_4096 4096

#define	cmuClkDiv_512 512

#define	cmuClkDiv_64 64

#define	cmuClkDiv_8 8

#define	cmuClkDiv_8192 8192

Typedefs
typedef uint32_t	CMU_ClkDiv_TypeDef

Enumerations
enum	CMU_AUXHFRCOBand_TypeDef { cmuAUXHFRCOBand_1MHz = _CMU_AUXHFRCOCTRL_BAND_1MHZ, cmuAUXHFRCOBand_7MHz = _CMU_AUXHFRCOCTRL_BAND_7MHZ, cmuAUXHFRCOBand_11MHz = _CMU_AUXHFRCOCTRL_BAND_11MHZ, cmuAUXHFRCOBand_14MHz = _CMU_AUXHFRCOCTRL_BAND_14MHZ, cmuAUXHFRCOBand_21MHz = _CMU_AUXHFRCOCTRL_BAND_21MHZ, cmuAUXHFRCOBand_28MHz = _CMU_AUXHFRCOCTRL_BAND_28MHZ }

enum	CMU_Clock_TypeDef { cmuClock_HF , cmuClock_DBG , cmuClock_AUX , cmuClock_HFPER , cmuClock_USART0 , cmuClock_USART1 , cmuClock_USART2 , cmuClock_UART0 , cmuClock_UART1 , cmuClock_TIMER0 , cmuClock_TIMER1 , cmuClock_TIMER2 , cmuClock_TIMER3 , cmuClock_ACMP0 , cmuClock_ACMP1 , cmuClock_PRS , cmuClock_DAC0 , cmuClock_GPIO , cmuClock_VCMP , cmuClock_ADC0 , cmuClock_I2C0 , cmuClock_I2C1 , cmuClock_CORE , cmuClock_AES , cmuClock_DMA , cmuClock_HFLE , cmuClock_EBI , cmuClock_USB , cmuClock_LFA , cmuClock_RTC , cmuClock_LETIMER0 , cmuClock_LCDpre , cmuClock_LCD , cmuClock_PCNT0 , cmuClock_PCNT1 , cmuClock_PCNT2 , cmuClock_LESENSE , cmuClock_LFB , cmuClock_LEUART0 , cmuClock_LEUART1 }

enum	CMU_HFRCOBand_TypeDef { cmuHFRCOBand_1MHz = _CMU_HFRCOCTRL_BAND_1MHZ, cmuHFRCOBand_7MHz = _CMU_HFRCOCTRL_BAND_7MHZ, cmuHFRCOBand_11MHz = _CMU_HFRCOCTRL_BAND_11MHZ, cmuHFRCOBand_14MHz = _CMU_HFRCOCTRL_BAND_14MHZ, cmuHFRCOBand_21MHz = _CMU_HFRCOCTRL_BAND_21MHZ, cmuHFRCOBand_28MHz = _CMU_HFRCOCTRL_BAND_28MHZ }

enum	CMU_LFXOBoost_TypeDef { cmuLfxoBoost70 = 0x0, cmuLfxoBoost100 = 0x2, cmuLfxoBoost70Reduced = 0x1, cmuLfxoBoost100Reduced = 0x3 }

enum	CMU_Osc_TypeDef { cmuOsc_LFXO , cmuOsc_LFRCO , cmuOsc_HFXO , cmuOsc_HFRCO , cmuOsc_AUXHFRCO , cmuOsc_ULFRCO }

enum	CMU_OscMode_TypeDef { cmuOscMode_Crystal , cmuOscMode_AcCoupled , cmuOscMode_External }

enum	CMU_Select_TypeDef { cmuSelect_Error , cmuSelect_Disabled , cmuSelect_LFXO , cmuSelect_LFRCO , cmuSelect_HFXO , cmuSelect_HFRCO , cmuSelect_HFCLKLE , cmuSelect_AUXHFRCO , cmuSelect_HFSRCCLK , cmuSelect_HFCLK , cmuSelect_ULFRCO }

Functions
CMU_AUXHFRCOBand_TypeDef	CMU_AUXHFRCOBandGet (void)
	Get AUXHFRCO band in use.

void	CMU_AUXHFRCOBandSet ( CMU_AUXHFRCOBand_TypeDef band)
	Set AUXHFRCO band and the tuning value based on the value in the calibration table made during production.

uint32_t	CMU_Calibrate (uint32_t HFCycles, CMU_Osc_TypeDef reference)
	Calibrate clock.

void	CMU_CalibrateConfig (uint32_t downCycles, CMU_Osc_TypeDef downSel, CMU_Osc_TypeDef upSel)
	Configure clock calibration.

__STATIC_INLINE void	CMU_CalibrateCont (bool enable)
	Configures continuous calibration mode.

uint32_t	CMU_CalibrateCountGet (void)
	Get calibration count register.

__STATIC_INLINE void	CMU_CalibrateStart (void)
	Starts calibration.

__STATIC_INLINE void	CMU_CalibrateStop (void)
	Stop the calibration counters.

CMU_ClkDiv_TypeDef	CMU_ClockDivGet ( CMU_Clock_TypeDef clock)
	Get clock divisor/prescaler.

void	CMU_ClockDivSet ( CMU_Clock_TypeDef clock, CMU_ClkDiv_TypeDef div)
	Set clock divisor/prescaler.

void	CMU_ClockEnable ( CMU_Clock_TypeDef clock, bool enable)
	Enable/disable a clock.

uint32_t	CMU_ClockFreqGet ( CMU_Clock_TypeDef clock)
	Get clock frequency for a clock point.

CMU_Select_TypeDef	CMU_ClockSelectGet ( CMU_Clock_TypeDef clock)
	Get currently selected reference clock used for a clock branch.

void	CMU_ClockSelectSet ( CMU_Clock_TypeDef clock, CMU_Select_TypeDef ref)
	Select reference clock/oscillator used for a clock branch.

__STATIC_INLINE uint32_t	CMU_DivToLog2 ( CMU_ClkDiv_TypeDef div)
	Convert dividend to logarithmic value. Only works for even numbers equal to 2^n.

void	CMU_FreezeEnable (bool enable)
	CMU low frequency register synchronization freeze control.

CMU_HFRCOBand_TypeDef	CMU_HFRCOBandGet (void)
	Get HFRCO band in use.

void	CMU_HFRCOBandSet ( CMU_HFRCOBand_TypeDef band)
	Set HFRCO band and the tuning value based on the value in the calibration table made during production.

uint32_t	CMU_HFRCOStartupDelayGet (void)
	Get the HFRCO startup delay.

void	CMU_HFRCOStartupDelaySet (uint32_t delay)
	Set the HFRCO startup delay.

void	CMU_HFXOInit (const CMU_HFXOInit_TypeDef *hfxoInit)
	Set HFXO control registers.

__STATIC_INLINE void	CMU_IntClear (uint32_t flags)
	Clear one or more pending CMU interrupts.

__STATIC_INLINE void	CMU_IntDisable (uint32_t flags)
	Disable one or more CMU interrupts.

__STATIC_INLINE void	CMU_IntEnable (uint32_t flags)
	Enable one or more CMU interrupts.

__STATIC_INLINE uint32_t	CMU_IntGet (void)
	Get pending CMU interrupts.

__STATIC_INLINE uint32_t	CMU_IntGetEnabled (void)
	Get enabled and pending CMU interrupt flags.

__STATIC_INLINE void	CMU_IntSet (uint32_t flags)
	Set one or more pending CMU interrupts.

uint32_t	CMU_LCDClkFDIVGet (void)
	Get the LCD framerate divisor (FDIV) setting.

void	CMU_LCDClkFDIVSet (uint32_t div)
	Set the LCD framerate divisor (FDIV) setting.

void	CMU_LFXOInit (const CMU_LFXOInit_TypeDef *lfxoInit)
	Set LFXO control registers.

__STATIC_INLINE void	CMU_Lock (void)
	Lock the CMU in order to protect some of its registers against unintended modification.

__STATIC_INLINE uint32_t	CMU_Log2ToDiv (uint32_t log2)
	Convert logarithm of 2 prescaler to division factor.

void	CMU_OscillatorEnable ( CMU_Osc_TypeDef osc, bool enable, bool wait)
	Enable/disable oscillator.

uint32_t	CMU_OscillatorTuningGet ( CMU_Osc_TypeDef osc)
	Get oscillator frequency tuning setting.

void	CMU_OscillatorTuningSet ( CMU_Osc_TypeDef osc, uint32_t val)
	Set the oscillator frequency tuning control.

bool	CMU_PCNTClockExternalGet (unsigned int instance)
	Determine if currently selected PCNTn clock used is external or LFBCLK.

void	CMU_PCNTClockExternalSet (unsigned int instance, bool external)
	Select PCNTn clock.

__STATIC_INLINE void	CMU_Unlock (void)
	Unlock the CMU so that writing to locked registers again is possible.

void	CMU_UpdateWaitStates (uint32_t freq, int vscale)

Macro Definition Documentation

#define CMU_HFXOINIT_DEFAULT

Value:

         { \
        
         _CMU_CTRL_HFXOBOOST_DEFAULT,
         
          /* 100% HFXO boost */
         
         \
        
         _CMU_CTRL_HFXOTIMEOUT_DEFAULT,
         
          /* 16k startup delay */
         
         \
        
         false,
         
          /* Disable glitch detector */
         
         \
        
         cmuOscMode_Crystal,
         
          /* Crystal oscillator */
         
         \
        
         }

Default HFXO initialization values for Platform 1 devices.

Definition at line 1516 of file em_cmu.h .

#define CMU_HFXOINIT_EXTERNAL_CLOCK

Value:

         { \
        
         0,
         
          /* Minimal HFXO boost, 50% */
         
         \
        
         _CMU_CTRL_HFXOTIMEOUT_8CYCLES,
         
          /* Minimal startup delay, 8 cycles */
         
         \
        
         false,
         
          /* Disable glitch detector */
         
         \
        
         cmuOscMode_External,
         
          /* External digital clock */
         
         \
        
         }

Definition at line 1523 of file em_cmu.h .

#define CMU_LFXOINIT_DEFAULT

Value:

         { \
        
         cmuLfxoBoost70, \
        
         _CMU_CTRL_LFXOTIMEOUT_DEFAULT, \
        
         cmuOscMode_Crystal, \
        
         }

Default LFXO initialization values for platform 1 devices.

Definition at line 1379 of file em_cmu.h .

#define CMU_LFXOINIT_EXTERNAL_CLOCK

Value:

         { \
        
         cmuLfxoBoost70, \
        
         _CMU_CTRL_LFXOTIMEOUT_8CYCLES, \
        
         cmuOscMode_External, \
        
         }

Definition at line 1385 of file em_cmu.h .

#define cmuClkDiv_1 1

Clock divisors. These values are valid for prescalers. Divide clock by 1.

Definition at line 177 of file em_cmu.h .

Referenced by CAPLESENSE_setupCMU() , CMU_ClockDivGet() , CMU_ClockDivSet() , and RETARGET_SerialInit() .

#define cmuClkDiv_1024 1024

Divide clock by 1024.

Definition at line 187 of file em_cmu.h .

#define cmuClkDiv_128 128

Divide clock by 128.

Definition at line 184 of file em_cmu.h .

Referenced by CMU_ClockDivSet() , and CMU_LCDClkFDIVSet() .

#define cmuClkDiv_16 16

Divide clock by 16.

Definition at line 181 of file em_cmu.h .

Referenced by CMU_ClockDivGet() , CMU_ClockDivSet() , and CMU_ClockFreqGet() .

#define cmuClkDiv_16384 16384

Divide clock by 16384.

Definition at line 191 of file em_cmu.h .

#define cmuClkDiv_2 2

Divide clock by 2.

Definition at line 178 of file em_cmu.h .

#define cmuClkDiv_2048 2048

Divide clock by 2048.

Definition at line 188 of file em_cmu.h .

#define cmuClkDiv_256 256

Divide clock by 256.

Definition at line 185 of file em_cmu.h .

Referenced by UDELAY_Calibrate() .

#define cmuClkDiv_32 32

Divide clock by 32.

Definition at line 182 of file em_cmu.h .

#define cmuClkDiv_32768 32768

Divide clock by 32768.

Definition at line 192 of file em_cmu.h .

Referenced by CMU_ClockDivSet() .

#define cmuClkDiv_4 4

Divide clock by 4.

Definition at line 179 of file em_cmu.h .

#define cmuClkDiv_4096 4096

Divide clock by 4096.

Definition at line 189 of file em_cmu.h .

#define cmuClkDiv_512 512

Divide clock by 512.

Definition at line 186 of file em_cmu.h .

Referenced by CMU_ClockDivSet() .

#define cmuClkDiv_64 64

Divide clock by 64.

Definition at line 183 of file em_cmu.h .

#define cmuClkDiv_8 8

Divide clock by 8.

Definition at line 180 of file em_cmu.h .

Referenced by CMU_ClockDivSet() .

#define cmuClkDiv_8192 8192

Divide clock by 8192.

Definition at line 190 of file em_cmu.h .

Typedef Documentation

typedef uint32_t CMU_ClkDiv_TypeDef

Clock divider configuration

Definition at line 195 of file em_cmu.h .

Enumeration Type Documentation

enum CMU_AUXHFRCOBand_TypeDef

AUX High frequency RCO bands

Enumerator
cmuAUXHFRCOBand_1MHz	1MHz RC band
cmuAUXHFRCOBand_7MHz	7MHz RC band
cmuAUXHFRCOBand_11MHz	11MHz RC band
cmuAUXHFRCOBand_14MHz	14MHz RC band
cmuAUXHFRCOBand_21MHz	21MHz RC band
cmuAUXHFRCOBand_28MHz	28MHz RC band

Definition at line 218 of file em_cmu.h .

enum CMU_Clock_TypeDef

Clock points in CMU. Please refer to CMU overview in reference manual.

Enumerator
cmuClock_HF	High frequency clock
cmuClock_DBG	Debug clock
cmuClock_AUX	AUX clock
cmuClock_HFPER	High frequency peripheral clock
cmuClock_USART0	Universal sync/async receiver/transmitter 0 clock.
cmuClock_USART1	Universal sync/async receiver/transmitter 1 clock.
cmuClock_USART2	Universal sync/async receiver/transmitter 2 clock.
cmuClock_UART0	Universal async receiver/transmitter 0 clock.
cmuClock_UART1	Universal async receiver/transmitter 1 clock.
cmuClock_TIMER0	Timer 0 clock.
cmuClock_TIMER1	Timer 1 clock.
cmuClock_TIMER2	Timer 2 clock.
cmuClock_TIMER3	Timer 3 clock.
cmuClock_ACMP0	Analog comparator 0 clock.
cmuClock_ACMP1	Analog comparator 1 clock.
cmuClock_PRS	Peripheral reflex system clock.
cmuClock_DAC0	Digital to analog converter 0 clock.
cmuClock_GPIO	General purpose input/output clock.
cmuClock_VCMP	Voltage comparator clock.
cmuClock_ADC0	Analog to digital converter 0 clock.
cmuClock_I2C0	I2C 0 clock.
cmuClock_I2C1	I2C 1 clock.
cmuClock_CORE	Core clock
cmuClock_AES	Advanced encryption standard accelerator clock.
cmuClock_DMA	Direct memory access controller clock.
cmuClock_HFLE	Low energy clock divided down from HFCORECLK.
cmuClock_EBI	External bus interface clock.
cmuClock_USB	USB clock.
cmuClock_LFA	Low frequency A clock
cmuClock_RTC	Real time counter clock.
cmuClock_LETIMER0	Low energy timer 0 clock.
cmuClock_LCDpre	Liquid crystal display, pre FDIV clock.
cmuClock_LCD	Liquid crystal display clock. Please notice that FDIV prescaler must be set by special API.
cmuClock_PCNT0	Pulse counter 0 clock.
cmuClock_PCNT1	Pulse counter 1 clock.
cmuClock_PCNT2	Pulse counter 2 clock.
cmuClock_LESENSE	LESENSE clock.
cmuClock_LFB	Low frequency B clock
cmuClock_LEUART0	Low energy universal asynchronous receiver/transmitter 0 clock.
cmuClock_LEUART1	Low energy universal asynchronous receiver/transmitter 1 clock.

Definition at line 326 of file em_cmu.h .

enum CMU_HFRCOBand_TypeDef

High frequency system RCO bands

Enumerator
cmuHFRCOBand_1MHz	1MHz HFRCO band
cmuHFRCOBand_7MHz	7MHz HFRCO band
cmuHFRCOBand_11MHz	11MHz HFRCO band
cmuHFRCOBand_14MHz	14MHz HFRCO band
cmuHFRCOBand_21MHz	21MHz HFRCO band
cmuHFRCOBand_28MHz	28MHz HFRCO band

Definition at line 204 of file em_cmu.h .

enum CMU_LFXOBoost_TypeDef

LFXO Boost values.

Definition at line 1312 of file em_cmu.h .

enum CMU_Osc_TypeDef

Oscillator types.

Enumerator
cmuOsc_LFXO	Low frequency crystal oscillator.
cmuOsc_LFRCO	Low frequency RC oscillator.
cmuOsc_HFXO	High frequency crystal oscillator.
cmuOsc_HFRCO	High frequency RC oscillator.
cmuOsc_AUXHFRCO	Auxiliary high frequency RC oscillator.
cmuOsc_ULFRCO	Ultra low frequency RC oscillator.

Definition at line 1236 of file em_cmu.h .

enum CMU_OscMode_TypeDef

Oscillator modes.

Enumerator
cmuOscMode_Crystal	Crystal oscillator.
cmuOscMode_AcCoupled	AC coupled buffer.
cmuOscMode_External	External digital clock.

Definition at line 1254 of file em_cmu.h .

enum CMU_Select_TypeDef

Selectable clock sources.

Enumerator
cmuSelect_Error	Usage error.
cmuSelect_Disabled	Clock selector disabled.
cmuSelect_LFXO	Low frequency crystal oscillator.
cmuSelect_LFRCO	Low frequency RC oscillator.
cmuSelect_HFXO	High frequency crystal oscillator.
cmuSelect_HFRCO	High frequency RC oscillator.
cmuSelect_HFCLKLE	High frequency LE clock divided by 2 or 4.
cmuSelect_AUXHFRCO	Auxilliary clock source can be used for debug clock
cmuSelect_HFSRCCLK	High frequency source clock
cmuSelect_HFCLK	Divided HFCLK on Giant for debug clock, undivided on Tiny Gecko and for USBC (not used on Gecko)
cmuSelect_ULFRCO	Ultra low frequency RC oscillator.

Definition at line 1261 of file em_cmu.h .

Function Documentation

CMU_AUXHFRCOBand_TypeDef CMU_AUXHFRCOBandGet ( void )

Get AUXHFRCO band in use.

Returns: AUXHFRCO band in use.

Definition at line 1243 of file em_cmu.c .

References _CMU_AUXHFRCOCTRL_BAND_MASK , _CMU_AUXHFRCOCTRL_BAND_SHIFT , and CMU .

void CMU_AUXHFRCOBandSet ( CMU_AUXHFRCOBand_TypeDef band )

Set AUXHFRCO band and the tuning value based on the value in the calibration table made during production.

Parameters

[in] band AUXHFRCO band to activate.

Definition at line 1260 of file em_cmu.c .

uint32_t CMU_Calibrate	(	uint32_t	`HFCycles,`
		CMU_Osc_TypeDef	`reference`
	)

Calibrate clock.

Run a calibration for HFCLK against a selectable reference clock. Please refer to the reference manual, CMU chapter, for further details.

Note: This function will not return until calibration measurement is completed.

Parameters

[in]	`HFCycles`	The number of HFCLK cycles to run calibration. Increasing this number increases precision, but the calibration will take more time.
[in]	`ref`	The reference clock used to compare HFCLK with.

Returns: The number of ticks the reference clock after HFCycles ticks on the HF clock.

Definition at line 1451 of file em_cmu.c .

References _CMU_CALCNT_CALCNT_MASK , _CMU_CALCNT_CALCNT_SHIFT , _CMU_STATUS_CALBSY_SHIFT , BUS_RegBitRead() , CMU , CMU_CALCTRL_UPSEL_AUXHFRCO , CMU_CALCTRL_UPSEL_HFRCO , CMU_CALCTRL_UPSEL_HFXO , CMU_CALCTRL_UPSEL_LFRCO , CMU_CALCTRL_UPSEL_LFXO , CMU_CMD_CALSTART , cmuOsc_AUXHFRCO , cmuOsc_HFRCO , cmuOsc_HFXO , cmuOsc_LFRCO , and cmuOsc_LFXO .

void CMU_CalibrateConfig	(	uint32_t	`downCycles,`
		CMU_Osc_TypeDef	`downSel,`
		CMU_Osc_TypeDef	`upSel`
	)

Configure clock calibration.

Configure a calibration for a selectable clock source against another selectable reference clock. Refer to the reference manual, CMU chapter, for further details.

Note: After configuration, a call to CMU_CalibrateStart() is required, and the resulting calibration value can be read out with the CMU_CalibrateCountGet() function call.

Parameters

[in]	`downCycles`	The number of downSel clock cycles to run calibration. Increasing this number increases precision, but the calibration will take more time.
[in]	`downSel`	The clock which will be counted down downCycles
[in]	`upSel`	The reference clock, the number of cycles generated by this clock will be counted and added up, the result can be given with the CMU_CalibrateCountGet() function call.

Definition at line 1534 of file em_cmu.c .

References _CMU_CALCNT_CALCNT_MASK , _CMU_CALCNT_CALCNT_SHIFT , _CMU_CALCTRL_DOWNSEL_MASK , _CMU_CALCTRL_UPSEL_MASK , CMU , CMU_CALCTRL_DOWNSEL_AUXHFRCO , CMU_CALCTRL_DOWNSEL_HFRCO , CMU_CALCTRL_DOWNSEL_HFXO , CMU_CALCTRL_DOWNSEL_LFRCO , CMU_CALCTRL_DOWNSEL_LFXO , CMU_CALCTRL_UPSEL_AUXHFRCO , CMU_CALCTRL_UPSEL_HFRCO , CMU_CALCTRL_UPSEL_HFXO , CMU_CALCTRL_UPSEL_LFRCO , CMU_CALCTRL_UPSEL_LFXO , cmuOsc_AUXHFRCO , cmuOsc_HFRCO , cmuOsc_HFXO , cmuOsc_LFRCO , and cmuOsc_LFXO .

__STATIC_INLINE void CMU_CalibrateCont ( bool enable )

Configures continuous calibration mode.

Parameters

[in] enable If true, enables continuous calibration, if false disables continuous calibrartion

Definition at line 1662 of file em_cmu.h .

References _CMU_CALCTRL_CONT_SHIFT , BUS_RegBitWrite() , and CMU .

uint32_t CMU_CalibrateCountGet ( void )

Get calibration count register.

Note: If continuous calibrartion mode is active, calibration busy will almost always be off, and we just need to read the value, where the normal case would be that this function call has been triggered by the CALRDY interrupt flag.

Returns: Calibration count, the number of UPSEL clocks (see CMU_CalibrateConfig() ) in the period of DOWNSEL oscillator clock cycles configured by a previous write operation to CMU->CALCNT

Definition at line 1630 of file em_cmu.c .

References _CMU_CALCTRL_CONT_SHIFT , _CMU_STATUS_CALBSY_SHIFT , BUS_RegBitRead() , and CMU .

__STATIC_INLINE void CMU_CalibrateStart ( void )

Starts calibration.

Note: This call is usually invoked after CMU_CalibrateConfig() and possibly CMU_CalibrateCont()

Definition at line 1675 of file em_cmu.h .

References CMU , and CMU_CMD_CALSTART .

CMU_ClkDiv_TypeDef CMU_ClockDivGet ( CMU_Clock_TypeDef clock )

Get clock divisor/prescaler.

Parameters

[in] clock Clock point to get divisor/prescaler for. Notice that not all clock points have a divisor/prescaler. Please refer to CMU overview in reference manual.

Returns: The current clock point divisor/prescaler. 1 is returned if clock specifies a clock point without a divisor/prescaler.

Definition at line 1665 of file em_cmu.c .

References _CMU_CTRL_HFCLKDIV_MASK , _CMU_CTRL_HFCLKDIV_SHIFT , _CMU_HFCORECLKDIV_HFCORECLKDIV_MASK , _CMU_HFCORECLKDIV_HFCORECLKDIV_SHIFT , _CMU_HFPERCLKDIV_HFPERCLKDIV_MASK , _CMU_HFPERCLKDIV_HFPERCLKDIV_SHIFT , _CMU_LFAPRESC0_LCD_MASK , _CMU_LFAPRESC0_LCD_SHIFT , _CMU_LFAPRESC0_LESENSE_MASK , _CMU_LFAPRESC0_LESENSE_SHIFT , _CMU_LFAPRESC0_LETIMER0_MASK , _CMU_LFAPRESC0_LETIMER0_SHIFT , _CMU_LFAPRESC0_RTC_MASK , _CMU_LFAPRESC0_RTC_SHIFT , _CMU_LFBPRESC0_LEUART0_MASK , _CMU_LFBPRESC0_LEUART0_SHIFT , _CMU_LFBPRESC0_LEUART1_MASK , _CMU_LFBPRESC0_LEUART1_SHIFT , CMU , CMU_DivToLog2() , CMU_Log2ToDiv() , cmuClkDiv_1 , cmuClkDiv_16 , cmuClock_LCDpre , cmuClock_LESENSE , cmuClock_LETIMER0 , cmuClock_LEUART0 , cmuClock_LEUART1 , and cmuClock_RTC .

Referenced by UDELAY_Calibrate() .

void CMU_ClockDivSet	(	CMU_Clock_TypeDef	`clock,`
		CMU_ClkDiv_TypeDef	`div`
	)

Set clock divisor/prescaler.

Note: If setting a LF clock prescaler, synchronization into the low frequency domain is required. If the same register is modified before a previous update has completed, this function will stall until the previous synchronization has completed. Please refer to CMU_FreezeEnable() for a suggestion on how to reduce stalling time in some use cases.

Parameters

[in]	`clock`	Clock point to set divisor/prescaler for. Notice that not all clock points have a divisor/prescaler, please refer to CMU overview in the reference manual.
[in]	`div`	The clock divisor to use (<= cmuClkDiv_512).

Definition at line 1793 of file em_cmu.c .

References _CMU_CTRL_HFCLKDIV_MASK , _CMU_CTRL_HFCLKDIV_SHIFT , _CMU_HFCORECLKDIV_HFCORECLKDIV_MASK , _CMU_HFCORECLKDIV_HFCORECLKDIV_SHIFT , _CMU_HFPERCLKDIV_HFPERCLKDIV_MASK , _CMU_HFPERCLKDIV_HFPERCLKDIV_SHIFT , _CMU_LFAPRESC0_LCD_MASK , _CMU_LFAPRESC0_LCD_SHIFT , _CMU_LFAPRESC0_LESENSE_MASK , _CMU_LFAPRESC0_LESENSE_SHIFT , _CMU_LFAPRESC0_LETIMER0_MASK , _CMU_LFAPRESC0_LETIMER0_SHIFT , _CMU_LFAPRESC0_RTC_MASK , _CMU_LFAPRESC0_RTC_SHIFT , _CMU_LFBPRESC0_LEUART0_MASK , _CMU_LFBPRESC0_LEUART0_SHIFT , _CMU_LFBPRESC0_LEUART1_MASK , _CMU_LFBPRESC0_LEUART1_SHIFT , CMU , CMU_DivToLog2() , CMU_SYNCBUSY_LFAPRESC0 , CMU_SYNCBUSY_LFBPRESC0 , cmuClkDiv_1 , cmuClkDiv_128 , cmuClkDiv_16 , cmuClkDiv_32768 , cmuClkDiv_512 , cmuClkDiv_8 , cmuClock_LCDpre , cmuClock_LESENSE , cmuClock_LETIMER0 , cmuClock_LEUART0 , cmuClock_LEUART1 , cmuClock_RTC , SystemCoreClockGet() , and SystemHFClockGet() .

Referenced by CAPLESENSE_setupCMU() , RETARGET_SerialInit() , RTCDRV_Init() , SegmentLCD_Init() , UARTDRV_InitLeuart() , and UDELAY_Calibrate() .

void CMU_ClockEnable	(	CMU_Clock_TypeDef	`clock,`
		bool	`enable`
	)

Enable/disable a clock.

In general, module clocking is disabled after a reset. If a module clock is disabled, the registers of that module are not accessible and reading from such registers may return undefined values. Writing to registers of clock disabled modules have no effect. One should normally avoid accessing module registers of a module with a disabled clock.

Note: If enabling/disabling a LF clock, synchronization into the low frequency domain is required. If the same register is modified before a previous update has completed, this function will stall until the previous synchronization has completed. Please refer to CMU_FreezeEnable() for a suggestion on how to reduce stalling time in some use cases.

Parameters

[in]	`clock`	The clock to enable/disable. Notice that not all defined clock points have separate enable/disable control, please refer to CMU overview in reference manual.
[in]	`enable`	true - enable specified clock. false - disable specified clock.

Definition at line 1998 of file em_cmu.c .

References BUS_RegBitWrite() , CMU , CMU_ClockFreqGet() , CMU_SYNCBUSY_LFACLKEN0 , CMU_SYNCBUSY_LFBCLKEN0 , and cmuClock_HFLE .

Referenced by adcInit() , BOARD_init() , BSP_BccDeInit() , BSP_BccInit() , BSP_BusControlModeSet() , BSP_EbiInit() , BSP_initBoard() , BSP_McuBoard_Init() , CAPLESENSE_setupCMU() , CAPSENSE_Init() , DMA_Init() , DMADRV_DeInit() , ezradio_hal_GpioInit() , I2CSPM_Init() , ICM20648_spiInit() , MIC_init() , MICROSD_Init() , MICROSD_PowerOff() , MICROSD_PowerOn() , MSDD_Init() , RETARGET_SerialInit() , RTCDRV_DeInit() , RTCDRV_Init() , SegmentLCD_Disable() , SegmentLCD_Init() , setupOscillators() , SPI_TFT_Init() , SPIDRV_DeInit() , SPIDRV_Init() , TOUCH_Init() , UARTDRV_DeInit() , UARTDRV_InitLeuart() , UARTDRV_InitUart() , UDELAY_Calibrate() , USBD_Init() , USBTIMER_Init() , USTIMER_DeInit() , USTIMER_Init() , VDDCHECK_Disable() , and VDDCHECK_Init() .

uint32_t CMU_ClockFreqGet ( CMU_Clock_TypeDef clock )

Get clock frequency for a clock point.

Parameters

[in] clock Clock point to fetch frequency for.

Returns: The current frequency in Hz.

Definition at line 2117 of file em_cmu.c .

References _CMU_HFPERCLKDIV_HFPERCLKDIV_MASK , _CMU_HFPERCLKDIV_HFPERCLKDIV_SHIFT , _CMU_LCDCTRL_FDIV_MASK , _CMU_LCDCTRL_FDIV_SHIFT , _CMU_LFAPRESC0_LCD_MASK , _CMU_LFAPRESC0_LCD_SHIFT , _CMU_LFAPRESC0_LESENSE_MASK , _CMU_LFAPRESC0_LESENSE_SHIFT , _CMU_LFAPRESC0_LETIMER0_MASK , _CMU_LFAPRESC0_LETIMER0_SHIFT , _CMU_LFAPRESC0_RTC_MASK , _CMU_LFAPRESC0_RTC_SHIFT , _CMU_LFBPRESC0_LEUART0_MASK , _CMU_LFBPRESC0_LEUART0_SHIFT , _CMU_LFBPRESC0_LEUART1_MASK , _CMU_LFBPRESC0_LEUART1_SHIFT , CMU , CMU_DivToLog2() , CMU_Log2ToDiv() , cmuClkDiv_16 , cmuClock_LFA , cmuClock_LFB , SystemCoreClockGet() , and SystemHFClockGet() .

Referenced by ADC_PrescaleCalc() , ADC_TimebaseCalc() , BSP_TraceProfilerSetup() , CMU_ClockEnable() , CMU_ClockSelectSet() , CMU_HFRCOBandSet() , DAC_PrescaleCalc() , I2C_BusFreqGet() , I2C_BusFreqSet() , LESENSE_ScanFreqSet() , LEUART_BaudrateGet() , LEUART_BaudrateSet() , MIC_init() , MSC_Init() , UARTDRV_InitLeuart() , USART_BaudrateAsyncSet() , USART_BaudrateGet() , USART_BaudrateSyncSet() , USBTIMER_Init() , USTIMER_Init() , and UTIL_init() .

CMU_Select_TypeDef CMU_ClockSelectGet ( CMU_Clock_TypeDef clock )

Get currently selected reference clock used for a clock branch.

Parameters

[in]


              clock

Clock branch to fetch selected ref. clock for. One of:

Returns: Reference clock used for clocking selected branch, cmuSelect_Error if invalid clock provided.

Definition at line 2843 of file em_cmu.c .

References _CMU_CTRL_DBGCLK_MASK , _CMU_LFCLKSEL_LFA_MASK , _CMU_LFCLKSEL_LFAE_MASK , _CMU_LFCLKSEL_LFB_MASK , _CMU_LFCLKSEL_LFBE_MASK , _CMU_STATUS_USBCHFCLKSEL_MASK , CMU , CMU_CTRL_DBGCLK_AUXHFRCO , CMU_CTRL_DBGCLK_HFCLK , CMU_LFCLKSEL_LFA_HFCORECLKLEDIV2 , CMU_LFCLKSEL_LFA_LFRCO , CMU_LFCLKSEL_LFA_LFXO , CMU_LFCLKSEL_LFB_HFCORECLKLEDIV2 , CMU_LFCLKSEL_LFB_LFRCO , CMU_LFCLKSEL_LFB_LFXO , CMU_STATUS_HFRCOSEL , CMU_STATUS_HFXOSEL , CMU_STATUS_LFRCOSEL , CMU_STATUS_LFXOSEL , CMU_STATUS_USBCHFCLKSEL , CMU_STATUS_USBCLFRCOSEL , CMU_STATUS_USBCLFXOSEL , cmuSelect_AUXHFRCO , cmuSelect_Disabled , cmuSelect_Error , cmuSelect_HFCLK , cmuSelect_HFCLKLE , cmuSelect_HFRCO , cmuSelect_HFSRCCLK , cmuSelect_HFXO , cmuSelect_LFRCO , cmuSelect_LFXO , and cmuSelect_ULFRCO .

Referenced by CMU_HFRCOBandSet() , CMU_HFXOInit() , CMU_LFXOInit() , UDELAY_Calibrate() , and USBD_Init() .

void CMU_ClockSelectSet	(	CMU_Clock_TypeDef	`clock,`
		CMU_Select_TypeDef	`ref`
	)

Select reference clock/oscillator used for a clock branch.

Notice that if a selected reference is not enabled prior to selecting its use, it will be enabled, and this function will wait for the selected oscillator to be stable. It will however NOT be disabled if another reference clock is selected later.

This feature is particularly important if selecting a new reference clock for the clock branch clocking the core, otherwise the system may halt.

Parameters

[in]	`clock`	Clock branch to select reference clock for. One of: cmuClock_HF cmuClock_LFA cmuClock_LFB cmuClock_DBG
[in]	`ref`	Reference selected for clocking, please refer to reference manual for for details on which reference is available for a specific clock branch. cmuSelect_HFRCO cmuSelect_LFRCO cmuSelect_HFXO cmuSelect_LFXO cmuSelect_HFCLKLE cmuSelect_AUXHFRCO cmuSelect_HFCLK cmuSelect_ULFRCO

Definition at line 3341 of file em_cmu.c .

Referenced by BSP_BccInit() , BSP_initClocks() , CAPLESENSE_setupCMU() , MIC_init() , RETARGET_SerialInit() , RTCDRV_Init() , SegmentLCD_Init() , setupOscillators() , UARTDRV_InitLeuart() , UDELAY_Calibrate() , USBD_Init() , and USBH_Init() .

__STATIC_INLINE uint32_t CMU_DivToLog2 ( CMU_ClkDiv_TypeDef div )

Convert dividend to logarithmic value. Only works for even numbers equal to 2^n.

Parameters

[in] div Unscaled dividend.

Returns: Logarithm of 2, as used by fixed prescalers.

Definition at line 1702 of file em_cmu.h .

Referenced by CMU_ClockDivGet() , CMU_ClockDivSet() , CMU_ClockFreqGet() , and RTCDRV_Init() .

void CMU_FreezeEnable ( bool enable )

CMU low frequency register synchronization freeze control.

Some CMU registers requires synchronization into the low frequency (LF) domain. The freeze feature allows for several such registers to be modified before passing them to the LF domain simultaneously (which takes place when the freeze mode is disabled).

Another usage scenario of this feature, is when using an API (such as the CMU API) for modifying several bit fields consecutively in the same register. If freeze mode is enabled during this sequence, stalling can be avoided.

Note: When enabling freeze mode, this function will wait for all current ongoing CMU synchronization to LF domain to complete (Normally synchronization will not be in progress.) However for this reason, when using freeze mode, modifications of registers requiring LF synchronization should be done within one freeze enable/disable block to avoid unecessary stalling.

Parameters

[in]


              enable

true - enable freeze, modified registers are not propagated to the LF domain
false - disable freeze, modified registers are propagated to LF domain

Definition at line 4160 of file em_cmu.c .

References CMU , and CMU_FREEZE_REGFREEZE .

CMU_HFRCOBand_TypeDef CMU_HFRCOBandGet ( void )

Get HFRCO band in use.

Returns: HFRCO band in use.

Definition at line 4187 of file em_cmu.c .

References _CMU_HFRCOCTRL_BAND_MASK , _CMU_HFRCOCTRL_BAND_SHIFT , and CMU .

Referenced by CMU_ClockSelectSet() .

void CMU_HFRCOBandSet ( CMU_HFRCOBand_TypeDef band )

Set HFRCO band and the tuning value based on the value in the calibration table made during production.

Parameters

[in] band HFRCO band to activate.

Definition at line 4203 of file em_cmu.c .

References _CMU_HFRCOCTRL_BAND_MASK , _CMU_HFRCOCTRL_BAND_SHIFT , _CMU_HFRCOCTRL_TUNING_MASK , _CMU_HFRCOCTRL_TUNING_SHIFT , _DEVINFO_HFRCOCAL0_BAND11_MASK , _DEVINFO_HFRCOCAL0_BAND11_SHIFT , _DEVINFO_HFRCOCAL0_BAND14_MASK , _DEVINFO_HFRCOCAL0_BAND14_SHIFT , _DEVINFO_HFRCOCAL0_BAND1_MASK , _DEVINFO_HFRCOCAL0_BAND1_SHIFT , _DEVINFO_HFRCOCAL0_BAND7_MASK , _DEVINFO_HFRCOCAL0_BAND7_SHIFT , _DEVINFO_HFRCOCAL1_BAND21_MASK , _DEVINFO_HFRCOCAL1_BAND21_SHIFT , _DEVINFO_HFRCOCAL1_BAND28_MASK , _DEVINFO_HFRCOCAL1_BAND28_SHIFT , CMU , CMU_ClockFreqGet() , CMU_ClockSelectGet() , cmuClock_HF , cmuClock_HFLE , cmuHFRCOBand_11MHz , cmuHFRCOBand_14MHz , cmuHFRCOBand_1MHz , cmuHFRCOBand_21MHz , cmuHFRCOBand_28MHz , cmuHFRCOBand_7MHz , cmuSelect_HFRCO , DEVINFO , and SystemCoreClockGet() .

uint32_t CMU_HFRCOStartupDelayGet ( void )

Get the HFRCO startup delay.

Please refer to the reference manual for further details.

Returns: The startup delay in use.

Definition at line 4456 of file em_cmu.c .

References _CMU_HFRCOCTRL_SUDELAY_MASK , _CMU_HFRCOCTRL_SUDELAY_SHIFT , and CMU .

void CMU_HFRCOStartupDelaySet ( uint32_t delay )

Set the HFRCO startup delay.

Please refer to the reference manual for further details.

Parameters

[in] delay The startup delay to set (<= 31).

Definition at line 4472 of file em_cmu.c .

References _CMU_HFRCOCTRL_SUDELAY_MASK , _CMU_HFRCOCTRL_SUDELAY_SHIFT , and CMU .

void CMU_HFXOInit ( const CMU_HFXOInit_TypeDef * hfxoInit )

Set HFXO control registers.

Note: HFXO configuration should be obtained from a configuration tool, app note or xtal datasheet. This function disables the HFXO to ensure a valid state before update.

Parameters

[in] hfxoInit HFXO setup parameters

Definition at line 4616 of file em_cmu.c .

References _CMU_CTRL_HFXOBOOST_MASK , _CMU_CTRL_HFXOBOOST_SHIFT , _CMU_CTRL_HFXOGLITCHDETEN_MASK , _CMU_CTRL_HFXOMODE_MASK , _CMU_CTRL_HFXOMODE_SHIFT , _CMU_CTRL_HFXOTIMEOUT_MASK , _CMU_CTRL_HFXOTIMEOUT_SHIFT , CMU_HFXOInit_TypeDef::boost , BUS_RegBitWrite() , CMU , CMU_ClockSelectGet() , CMU_CTRL_HFXOGLITCHDETEN , CMU_OscillatorEnable() , cmuClock_HF , cmuOsc_HFXO , cmuOscMode_AcCoupled , cmuOscMode_Crystal , cmuOscMode_External , cmuSelect_HFXO , CMU_HFXOInit_TypeDef::glitchDetector , CMU_HFXOInit_TypeDef::mode , SystemHFXOClockGet() , and CMU_HFXOInit_TypeDef::timeout .

Referenced by BSP_initClocks() .

__STATIC_INLINE void CMU_IntClear ( uint32_t flags )

Clear one or more pending CMU interrupts.

Parameters

[in] flags CMU interrupt sources to clear.

Definition at line 1735 of file em_cmu.h .

References CMU .

__STATIC_INLINE void CMU_IntDisable ( uint32_t flags )

Disable one or more CMU interrupts.

Parameters

[in] flags CMU interrupt sources to disable.

Definition at line 1747 of file em_cmu.h .

References CMU .

__STATIC_INLINE void CMU_IntEnable ( uint32_t flags )

Enable one or more CMU interrupts.

Note: Depending on the use, a pending interrupt may already be set prior to enabling the interrupt. Consider using CMU_IntClear() prior to enabling if such a pending interrupt should be ignored.

Parameters

[in] flags CMU interrupt sources to enable.

Definition at line 1764 of file em_cmu.h .

References CMU .

__STATIC_INLINE uint32_t CMU_IntGet ( void )

Get pending CMU interrupts.

Returns: CMU interrupt sources pending.

Definition at line 1776 of file em_cmu.h .

References CMU .

__STATIC_INLINE uint32_t CMU_IntGetEnabled ( void )

Get enabled and pending CMU interrupt flags.

Useful for handling more interrupt sources in the same interrupt handler.

Note: The event bits are not cleared by the use of this function.

Returns

Pending and enabled CMU interrupt sources The return value is the bitwise AND of

the enabled interrupt sources in CMU_IEN and
the pending interrupt flags CMU_IF

Definition at line 1797 of file em_cmu.h .

References CMU .

__STATIC_INLINE void CMU_IntSet ( uint32_t flags )

Set one or more pending CMU interrupts.

Parameters

[in] flags CMU interrupt sources to set to pending.

Definition at line 1812 of file em_cmu.h .

References CMU .

uint32_t CMU_LCDClkFDIVGet ( void )

Get the LCD framerate divisor (FDIV) setting.

Returns: The LCD framerate divisor.

Definition at line 4754 of file em_cmu.c .

References _CMU_LCDCTRL_FDIV_MASK , _CMU_LCDCTRL_FDIV_SHIFT , and CMU .

void CMU_LCDClkFDIVSet ( uint32_t div )

Set the LCD framerate divisor (FDIV) setting.

Note: The FDIV field (CMU LCDCTRL register) should only be modified while the LCD module is clock disabled (CMU LFACLKEN0.LCD bit is 0). This function will NOT modify FDIV if the LCD module clock is enabled. Please refer to CMU_ClockEnable() for disabling/enabling LCD clock.

Parameters

[in] div The FDIV setting to use.

Definition at line 4776 of file em_cmu.c .

References _CMU_LCDCTRL_FDIV_MASK , _CMU_LCDCTRL_FDIV_SHIFT , CMU , CMU_LFACLKEN0_LCD , and cmuClkDiv_128 .

Referenced by SegmentLCD_Init() .

void CMU_LFXOInit ( const CMU_LFXOInit_TypeDef * lfxoInit )

Set LFXO control registers.

Note: LFXO configuration should be obtained from a configuration tool, app note or xtal datasheet. This function disables the LFXO to ensure a valid state before update.

Parameters

[in] lfxoInit LFXO setup parameters

Definition at line 4806 of file em_cmu.c .

References _CMU_CTRL_LFXOBOOST_MASK , _CMU_CTRL_LFXOBOOST_SHIFT , _CMU_CTRL_LFXOMODE_MASK , _CMU_CTRL_LFXOMODE_SHIFT , _CMU_CTRL_LFXOTIMEOUT_MASK , _CMU_CTRL_LFXOTIMEOUT_SHIFT , _EMU_AUXCTRL_REDLFXOBOOST_SHIFT , CMU_LFXOInit_TypeDef::boost , BUS_RegBitWrite() , BUS_RegMaskedWrite() , CMU , CMU_ClockSelectGet() , CMU_OscillatorEnable() , cmuClock_HF , cmuOsc_LFXO , cmuSelect_LFXO , EMU , CMU_LFXOInit_TypeDef::mode , and CMU_LFXOInit_TypeDef::timeout .

Referenced by BSP_initClocks() .

__STATIC_INLINE void CMU_Lock ( void )

Lock the CMU in order to protect some of its registers against unintended modification.

Please refer to the reference manual for CMU registers that will be locked.

Note: If locking the CMU registers, they must be unlocked prior to using any CMU API functions modifying CMU registers protected by the lock.

Definition at line 1830 of file em_cmu.h .

References CMU , and CMU_LOCK_LOCKKEY_LOCK .

Referenced by EMU_EnterEM3() .

__STATIC_INLINE uint32_t CMU_Log2ToDiv ( uint32_t log2 )

Convert logarithm of 2 prescaler to division factor.

Parameters

[in] log2 Logarithm of 2, as used by fixed prescalers.

Returns: Dividend.

Definition at line 1845 of file em_cmu.h .

Referenced by CMU_ClockDivGet() , and CMU_ClockFreqGet() .

void CMU_OscillatorEnable	(	CMU_Osc_TypeDef	`osc,`
		bool	`enable,`
		bool	`wait`
	)

Enable/disable oscillator.

Note: WARNING: When this function is called to disable either cmuOsc_LFXO or cmuOsc_HFXO the LFXOMODE or HFXOMODE fields of the CMU_CTRL register are reset to the reset value. I.e. if external clock sources are selected in either LFXOMODE or HFXOMODE fields, the configuration will be cleared and needs to be reconfigured if needed later.

Parameters

[in]	`osc`	The oscillator to enable/disable.
[in]	`enable`	true - enable specified oscillator. false - disable specified oscillator.
[in]	`wait`	Only used if `enable` is true. true - wait for oscillator start-up time to timeout before returning. false - do not wait for oscillator start-up time to timeout before returning.

Definition at line 4867 of file em_cmu.c .

Referenced by BSP_initClocks() , CMU_ClockSelectSet() , CMU_HFXOInit() , CMU_LFXOInit() , DBG_SWOEnable() , setupOscillators() , UDELAY_Calibrate() , and USBD_Init() .

uint32_t CMU_OscillatorTuningGet ( CMU_Osc_TypeDef osc )

Get oscillator frequency tuning setting.

Parameters

[in]

osc

Oscillator to get tuning value for, one of:

cmuOsc_LFRCO
cmuOsc_HFRCO
cmuOsc_AUXHFRCO
cmuOsc_HFXO if CMU_HFXOCTRL_PEAKDETSHUNTOPTMODE is defined

Returns: The oscillator frequency tuning setting in use.

Definition at line 5045 of file em_cmu.c .

References _CMU_AUXHFRCOCTRL_TUNING_MASK , _CMU_AUXHFRCOCTRL_TUNING_SHIFT , _CMU_HFRCOCTRL_TUNING_MASK , _CMU_HFRCOCTRL_TUNING_SHIFT , _CMU_LFRCOCTRL_TUNING_MASK , _CMU_LFRCOCTRL_TUNING_SHIFT , CMU , cmuOsc_AUXHFRCO , cmuOsc_HFRCO , cmuOsc_HFXO , and cmuOsc_LFRCO .

Referenced by CMU_OscillatorEnable() .

void CMU_OscillatorTuningSet	(	CMU_Osc_TypeDef	`osc,`
		uint32_t	`val`
	)

Set the oscillator frequency tuning control.

Note: Oscillator tuning is done during production, and the tuning value is automatically loaded after a reset. Changing the tuning value from the calibrated value is for more advanced use. Certain oscillators also have build-in tuning optimization.

Parameters

[in]	`osc`	Oscillator to set tuning value for, one of: cmuOsc_LFRCO cmuOsc_HFRCO cmuOsc_AUXHFRCO cmuOsc_HFXO if PEAKDETSHUNTOPTMODE is available. Note that CMD mode is set.
[in]	`val`	The oscillator frequency tuning setting to use.