NVM3HalEMDRV > NVM3

Detailed Description

NVM3 hal module.

This module provides the interface to the NVM. By having all NVM access functions in a separate file, it is possible to support different hardware by just substituting the functions in this module.

Note
These functions are used by the NVM3 and should not be used by any applications.

Macros

#define CHECK_DATA 1
Macro defining if data should be checked.
#define NVM3_HAL_WRITE_SIZE_16 1
Two writes are allowed.
#define NVM3_HAL_WRITE_SIZE_32 0
Only single writes are allowed.

Typedefs

typedef void * nvm3_HalPtr_t
Pointer to NVM.
typedef uint32_t nvm3_HalWriteSize_t
Write size capabilities in the NVM.

Functions

void nvm3_halClose (void)
Close the NVM3 hal for usage.
uint8_t nvm3_halGetDeviceId (void)
Retrieve the device id.
size_t nvm3_halGetPageSize (void)
Retrieve the page size.
nvm3_HalWriteSize_t nvm3_halGetWriteSize (void)
Retrieve the write size.
Ecode_t nvm3_halOpen ( nvm3_HalPtr_t nvmAdr, size_t nvmSize)
Open the NVM3 hal for usage.
Ecode_t nvm3_halPageErase ( nvm3_HalPtr_t nvmAdr)
Erase a page in the NVM.
void nvm3_halReadBytes ( nvm3_HalPtr_t nvmAdr, uint8_t *pDst, size_t cnt)
Read data from NVM.
void nvm3_halReadWords ( nvm3_HalPtr_t nvmAdr, uint32_t *pDst, size_t cnt)
Read data from NVM.
Ecode_t nvm3_halWriteBytes ( nvm3_HalPtr_t nvmAdr, void const *pSrc, size_t cnt)
Write data to NVM.
Ecode_t nvm3_halWriteWords ( nvm3_HalPtr_t nvmAdr, void const *pSrc, size_t cnt)
Write data to NVM.

Variables

static uint32_t openCnt = 0
A variable that keeps track of the open count.

Function Documentation

void nvm3_halClose ( void )

Close the NVM3 hal for usage.

This function should be called at program termination. Should be done before any graceful halts.

Definition at line 123 of file nvm3_hal_flash.c .

References MSC_Deinit() , and openCnt .

uint8_t nvm3_halGetDeviceId ( void )

Retrieve the device id.

This function is used to retrieve the device id.

Returns
The device id.

Definition at line 148 of file nvm3_hal_flash.c .

References _SILICON_LABS_GECKO_INTERNAL_SDID .

size_t nvm3_halGetPageSize ( void )

Retrieve the page size.

This function is used to retrieve the page size.

Returns
The page size.

Definition at line 133 of file nvm3_hal_flash.c .

References SYSTEM_GetFlashPageSize() .

Referenced by nvm3_halPageErase() .

nvm3_HalWriteSize_t nvm3_halGetWriteSize ( void )

Retrieve the write size.

This function is used to retrieve the write size for the device. It could be either NVM3_HAL_WRITE_SIZE_32 or NVM3_HAL_WRITE_SIZE_16 .

Returns
The write size.

Definition at line 139 of file nvm3_hal_flash.c .

References NVM3_HAL_WRITE_SIZE_16 , and NVM3_HAL_WRITE_SIZE_32 .

Ecode_t nvm3_halOpen ( nvm3_HalPtr_t nvmAdr,
size_t nvmSize
)

Open the NVM3 hal for usage.

This function must be run at initialization, before any other functions are called. It is used to call necessary startup routines before the hardware can be accessed.

Parameters
[in] nvmAdr A pointer to the destination in NVM.
[in] nvmSize The total size of the NVM.
Returns
The result of the open call. ECODE_NVM3_OK on success or a NVM3 Ecode_t on failure.

Definition at line 111 of file nvm3_hal_flash.c .

References ECODE_NVM3_OK , MSC_Init() , and openCnt .

Ecode_t nvm3_halPageErase ( nvm3_HalPtr_t nvmAdr )

Erase a page in the NVM.

This function is used to erase an NVM page.

Parameters
[in] nvmAdr A memory address pointing to the start of the page to erase.
Returns
The result of the erase operation.

Definition at line 226 of file nvm3_hal_flash.c .

References ECODE_NVM3_ERR_ERASE_FAILED , ECODE_NVM3_OK , MSC_ErasePage() , and nvm3_halGetPageSize() .

void nvm3_halReadBytes ( nvm3_HalPtr_t nvmAdr,
uint8_t * pDst,
size_t cnt
)

Read data from NVM.

This function is used to read data from the NVM. It will be a blocking call, since the thread asking for data to be read cannot continue without the data.

Parameters
[in] nvmAdr A memory address in NVM where the data shall be read.
[in] *pDst A pointer to the destination buffer.
[in] cnt The number of bytes to read.

Definition at line 153 of file nvm3_hal_flash.c .

void nvm3_halReadWords ( nvm3_HalPtr_t nvmAdr,
uint32_t * pDst,
size_t cnt
)

Read data from NVM.

This function is used to read data from the NVM. It will be a blocking call, since the thread asking for data to be read cannot continue without the data.

Parameters
[in] nvmAdr A memory address in NVM where the data shall be read.
[in] *pDst A pointer to the destination buffer.
[in] cnt The number of words to read.

Definition at line 163 of file nvm3_hal_flash.c .

Ecode_t nvm3_halWriteBytes ( nvm3_HalPtr_t nvmAdr,
void const * pSrc,
size_t cnt
)

Write data to NVM.

Parameters
[in] nvmAdr A memory address in NVM where the data shall be written.
[in] pSrc A pointer to the source data.
[in] cnt The number of bytes to write.
Returns
The result of the write operation. ECODE_NVM3_OK on success or a NVM3 Ecode_t on failure.

Definition at line 173 of file nvm3_hal_flash.c .

References ECODE_NVM3_OK , and nvm3_halWriteWords() .

Ecode_t nvm3_halWriteWords ( nvm3_HalPtr_t nvmAdr,
void const * pSrc,
size_t cnt
)

Write data to NVM.

This function is used to write data to the NVM. This is a blocking function.

Parameters
[in] nvmAdr A memory address in NVM where the data shall be written.
[in] *pSrc A pointer to the source data.
[in] cnt The number of words to write.
Returns
The result of the write operation. ECODE_NVM3_OK on success or a NVM3 Ecode_t on failure.

Definition at line 197 of file nvm3_hal_flash.c .

References ECODE_NVM3_ERR_INT_WRITE_TO_NOT_ERASED , ECODE_NVM3_ERR_WRITE_FAILED , ECODE_NVM3_OK , and MSC_WriteWord() .

Referenced by nvm3_halWriteBytes() .